aboutsummaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/net
AgeCommit message (Collapse)AuthorFilesLines
2014-08-30stmmac: ptp: fix the reference clockGiuseppe CAVALLARO1-0/+4
The PTP reference clock, used for setting the addend in the Timestamp Addend Register, was erroneously hard-coded (as reported in the databook just as example). The patch removes the macro named: STMMAC_SYSCLOCK and allows to use a reference clock (clk_ptp_ref_i) that can be passed from the platform. If not passed, the main driver clock will be used as default; note that this can be fine on some platforms. Note that, prior this patch, using the old STMMAC_SYSCLOCK on some platforms, as side effect, the ptp clock can move faster/slower than the system clock. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-11net: fec: Support phys probed from devicetree and fixed-linkUwe Kleine-König1-1/+28
This adds support for specifying the phy to be used with the fec in the devicetree using the standard phy-handle property and also supports fixed-link. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-11Documentation: dts: Add bindings for APM X-Gene SoC ethernet driverIyappan Subramanian1-0/+66
This patch adds documentation for APM X-Gene SoC ethernet DTS binding. Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Signed-off-by: Ravi Patel <rapatel@apm.com> Signed-off-by: Keyur Chudgar <kchudgar@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-05Merge tag 'master-2014-07-31' of ↵David S. Miller2-0/+74
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next Conflicts: net/6lowpan/iphc.c Minor conflicts in iphc.c were changes overlapping with some style cleanups. John W. Linville says: ==================== Please pull this last(?) batch of wireless change intended for the 3.17 stream... For the NFC bits, Samuel says: "This is a rather quiet one, we have: - A new driver from ST Microelectronics for their NCI ST21NFCB, including device tree support. - p2p support for the ST21NFCA driver - A few fixes an enhancements for the NFC digital laye" For the Atheros bits, Kalle says: "Michal and Janusz did some important RX aggregation fixes, basically we were missing RX reordering altogether. The 10.1 firmware doesn't support Ad-Hoc mode and Michal fixed ath10k so that it doesn't advertise Ad-Hoc support with that firmware. Also he implemented a workaround for a KVM issue." For the Bluetooth bits, Gustavo and Johan say: "To quote Gustavo from his previous request: 'Some last minute fixes for -next. We have a fix for a use after free in RFCOMM, another fix to an issue with ADV_DIRECT_IND and one for ADV_IND with auto-connection handling. Last, we added support for reading the codec and MWS setting for controllers that support these features.' Additionally there are fixes to LE scanning, an update to conform to the 4.1 core specification as well as fixes for tracking the page scan state. All of these fixes are important for 3.17." And, "We've got: - 6lowpan fixes/cleanups - A couple crash fixes, one for the Marvell HCI driver and another in LE SMP. - Fix for an incorrect connected state check - Fix for the bondable requirement during pairing (an issue which had crept in because of using "pairable" when in fact the actual meaning was "bondable" (these have different meanings in Bluetooth)" Along with those are some late-breaking hardware support patches in brcmfmac and b43 as well as a stray ath9k patch. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-02net: sh_eth: Add r8a7794 supportHisashi Nakamura1-0/+1
Signed-off-by: Hisashi Nakamura <hisashi.nakamura.ak@renesas.com> [uli: added bindings documentation] Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-31dts: Add bindings for multicast hash bins and perfect filter entriesVince Bridgers1-0/+6
This change adds bindings for the number of multicast hash bins and perfect filter entries supported by the Synopsys EMAC. The Synopsys EMAC core is configurable at device creation time, and can be configured for a different number of multicast hash bins and a different number of perfect filter entries. The device does not provide a way to query these parameters, therefore parameters are required. The Altera Cyclone V SOC has support for 256 multicast hash bins and 128 perfect filter entries, and is different than what's currently provided in the stmmac driver. Signed-off-by: Vince Bridgers <vbridgers2013@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-31amd-xgbe: Update/fix 2.5GbE supportLendacky, Thomas1-0/+6
Update the amd-xgbe driver and phylib driver to better support the 2.5GbE mode for the hardware. In order to be able establish 2.5GbE using clause 73 auto negotiation the device will support speed sets of 1GbE/10GbE and 2.5GbE/10GbE. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-31amd-xgbe: Add hardware timestamp supportLendacky, Thomas1-6/+10
This patch adds support for Tx and Rx hardware timestamping. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-31amd-xgbe: Add dma-coherent to device bindings documentationLendacky, Thomas1-0/+1
An earlier patch added support for the "dma-coherent" device property. This patch adds this optional property to the amd-xgbe device bindings documentation. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-29dt: bindings: add bindings for Broadcom bcm43xx sdio devicesArend van Spriel1-0/+41
The Broadcom bcm43xx sdio devices are fullmac devices that may be integrated in ARM platforms. Currently, the brcmfmac driver for these devices support use of platform data. This patch specifies the bindings that allow this platform data to be expressed in the devicetree. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> [hdegoede@redhat.com: drop clk / reg_on gpio handling, as there is no consensus on how to handle this yet] [hdegoede@redhat.com: move from bindings/staging to bindings] Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-22NFC: dts: st21nfcb_i2c: Add DTS DocumentationChristophe Ricard1-0/+33
Describe the properties used by the st21nfcb NFC controller driver. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-07-17net: davinci_mdio: reuse for keystone2 archGrygorii Strashko1-4/+4
The similar MDIO HW blocks is used by keystone 2 SoCs as in Davinci SoCs: - one in Gigabit Ethernet (GbE) Switch Subsystem See http://www.ti.com/lit/ug/sprugv9d/sprugv9d.pdf - one in 10 Gigabit Ethernet Subsystem See http://www.ti.com/lit/ug/spruhj5/spruhj5.pdf Hence, reuse Davinci MDIO driver for Keystone 2 and enable TI networking for Keystone 2 devices Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-11ethernet: Add new driver for Marvell Armada 375 network unitMarcin Wojtas1-0/+61
This commit adds a new network driver for the network controller in Marvell Armada 375 SoC. Given the controller is very different from the ones in the other Marvell SoCs that use the mv643xx_eth (Kirkwood, Orion, Discovery) and mvneta (Armada 370/38x/XP) drivers, a new driver is needed. Signed-off-by: Marcin Wojtas <mw@semihalf.com> [Ezequiel: coding style cleanup] Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-08net: systemport: add Wake-on-LAN supportFlorian Fainelli1-1/+2
Support for Wake-on-LAN using Magic Packet with or without SecureOn password is implemented doing the following: - setting the password to the relevant UniMAC registers - flagging the device as a wakeup source for the system, as well as its Wake-on-LAN interrupt - prepare the hardware for entering WoL mode - enabling the MPD interrupt to wake us The Device Tree binding documentation is also reflected to specify the third optional Wake-on-LAN interrupt line. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-23devicetree: add device tree bindings for cc2520 driverVarka Bhadram1-0/+29
DT bindings for cc2520 radio driver Signed-off-by: Varka Bhadram <varkab@cdac.in> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-05amd-xgbe: AMD 10GbE device bindings documentationLendacky, Thomas2-0/+51
This patch provides the documentation of the device bindings for the AMD 10GbE platform driver. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-03Documentation: add Device tree bindings for Hisilicon hix5hd2 ethernetZhangfei Gao1-0/+36
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-02Merge branch 'master' of ↵John W. Linville1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
2014-05-31Merge branch 'for-davem' of ↵David S. Miller3-0/+70
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next John W. Linville says: ==================== Please pull this batch of updates intended for 3.16... For the mac80211 bits, Johannes says: "Here I just have Heikki's rfkill GPIO cleanups. The ARM/tegra patch is OK with the maintainer (Stephen). Let me know of any problems." and; "We have a whole bunch of work on CSA by Andrei, Luca and Michal, but unfortunately it doesn't seem quite complete yet so it's still disabled. There's some TDLS work from Arik, and the rest is mostly minor fixes and cleanups." For the NFC bits, Samuel says: "This is the NFC pull request for 3.16. We have: - STMicroeectronics st21nfca support. The st21nfca is an HCI chipset and thus relies on the HCI stack. This submission provides support for tag redaer/writer mode (including Type 5) and device tree bindings. - PM runtime support and a bunch of bug fixes for TI's trf7970a. - Device tree support for NXP's pn544. Legacy platform data support is obviously kept intact. - NFC Tag type 4B support to the NFC Digital stack. - SOCK_RAW type support to the raw NFC socket, and allow NCI sniffing from that. This can be extended to report HCI frames and also proprietarry ones like e.g. the pn533 ones." For the iwlwifi bits, Emmanuel says: "Eran continues to work on new devices, Eyal is still digging in the rate control stuff, and Johannes added new functionality to the debug system we have in place now along with a few cleanups he made on the way. That's pretty much it." and; "Avri continues to work on the power code and Eran is improving the NVM handling as a preparations for new devices on which he works with Liad. Luca cleans up a bit the code while working on CSA. I have the regular BT Coex stuff and a small lockdep fix. Johannes has his regular amount of clean ups and improvements, the main one is the ability to leave 2 chains open to improve diversity and hence the throughput in high attenuation scenarios." and; "The regular amount of housekeeping here. I merged iwlwifi-fixes.git to be able to add the patch you didn't want in wireless.git at that stage of the -rc cycle. Luca has a few preparations for CSA implementation and also what seems to be a bugfix for P2P but hasn't caused issues we could notice." For the Atheros bits, Kalle says: "For ath10k Michal did various small fixes on how we handle hardware/firmware problems and he also fixed two memory leaks." Also included are a couple of pulls from the wireless tree to avoid/resolve merge issues... ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-27Merge branch 'master' of ↵John W. Linville3-0/+70
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
2014-05-26can: Add xilinx CAN device tree bindings documentationKedareswara rao Appana1-0/+44
Add xilinx CAN bindings documentation. Signed-off-by: Kedareswara rao Appana <appanad@xilinx.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2014-05-25NFC: dts: st21nfca_i2c: Correct minor typo in documentationChristophe Ricard1-1/+1
Replaced st,st21nfca-i2c by st,st21nfca_i2c to be concistent with below configuration and driver in drivers/nfc/st21nfca/ Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-05-24devicetree: bindings: Properly document micrel ks8851 SPI chipsStephen Boyd1-3/+12
The ks8851 SPI ethernet wasn't documented, but we documented the optional regulator supply for it under the mll based ethernet chip. Furthermore, that compatible string needed another 'l'. Fix all of this and document the optional vdd-io and reset-gpios properties. Cc: Nishanth Menon <nm@ti.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: <devicetree@vger.kernel.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-22Documentation: devicetree: net: refer to fixed-link.txtFlorian Fainelli3-6/+3
Update the Freescale TSEC PHY, Broadcom GENET & SYSTEMPORT Device Tree binding documentation to refer to the fixed-link Device Tree binding in fixed-link.txt. Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-22Documentation: devicetree: add old and deprecated 'fixed-link'Florian Fainelli1-0/+12
Update the fixed-link Device Tree binding documentation to contain information about the old and deprecated 5-digit 'fixed-link' property. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-22Merge tag 'nfc-next-3.16-1' of ↵John W. Linville3-0/+70
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/nfc-next Samuel Ortiz <sameo@linux.intel.com> says: "NFC: 3.16: First pull request This is the NFC pull request for 3.16. We have: - STMicroeectronics st21nfca support. The st21nfca is an HCI chipset and thus relies on the HCI stack. This submission provides support for tag redaer/writer mode (including Type 5) and device tree bindings. - PM runtime support and a bunch of bug fixes for TI's trf7970a. - Device tree support for NXP's pn544. Legacy platform data support is obviously kept intact. - NFC Tag type 4B support to the NFC Digital stack. - SOCK_RAW type support to the raw NFC socket, and allow NCI sniffing from that. This can be extended to report HCI frames and also proprietarry ones like e.g. the pn533 ones." Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-19NFC: dts: st21nfca_i2c: Add DTS DocumentationChristophe Ricard1-0/+33
Describe the properties used by the st21nfca NFC controller driver. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-05-16of: provide a binding for fixed link PHYsThomas Petazzoni1-0/+30
Some Ethernet MACs have a "fixed link", and are not connected to a normal MDIO-managed PHY device. For those situations, a Device Tree binding allows to describe a "fixed link" using a special PHY node. This patch adds: * A documentation for the fixed PHY Device Tree binding. * An of_phy_is_fixed_link() function that an Ethernet driver can call on its PHY phandle to find out whether it's a fixed link PHY or not. It should typically be used to know if of_phy_register_fixed_link() should be called. * An of_phy_register_fixed_link() function that instantiates the fixed PHY into the PHY subsystem, so that when the driver calls of_phy_connect(), the PHY device associated to the OF node will be found. These two additional functions also support the old fixed-link Device Tree binding used on PowerPC platforms, so that ultimately, the network device drivers for those platforms could be converted to use of_phy_is_fixed_link() and of_phy_register_fixed_link() instead of of_phy_connect_fixed_link(), while keeping compatibility with their respective Device Tree bindings. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-13drivers: net: cpsw-phy-sel: add am43xx platform supportMugunthan V N1-0/+1
AM43xx phy mode selection is similar to AM33xx platform, so adding only the compatibility string to the driver Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-13drivers: net: cpsw-phy-sel: add dra7xx support for phy selMugunthan V N1-1/+2
Add dra7xx support for selecting the phy mode which is present in control module of dra7xx SoC Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller4-5/+13
Conflicts: drivers/net/ethernet/altera/altera_sgdma.c net/netlink/af_netlink.c net/sched/cls_api.c net/sched/sch_api.c The netlink conflict dealt with moving to netlink_capable() and netlink_ns_capable() in the 'net' tree vs. supporting 'tc' operations in non-init namespaces. These were simple transformations from netlink_capable to netlink_ns_capable. The Altera driver conflict was simply code removal overlapping some void pointer cast cleanups in net-next. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-09net: mdio-gpio: fix device-tree binding documentationJohan Hovold1-1/+1
Fix aliases syntax in device-tree binding example to avoid copy-paste errors (the alias would be dropped silently). Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-07Update Micrel KSZ90x1 binding documentationHubert Chaumette2-49/+83
Renames micrel-ksz9021.txt to micrel-ksz90x1.txt and adds documentation for the KSZ9031 binding from patch 1. Also adds step increment information, and note about phy fixups. Signed-off-by: Hubert Chaumette <hchaumette@adeneo-embedded.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds1-2/+10
Pull networking fixes from David Miller: 1) e1000e computes header length incorrectly wrt vlans, fix from Vlad Yasevich. 2) ns_capable() check in sock_diag netlink code, from Andrew Lutomirski. 3) Fix invalid queue pairs handling in virtio_net, from Amos Kong. 4) Checksum offloading busted in sxgbe driver due to incorrect descriptor layout, fix from Byungho An. 5) Fix build failure with SMC_DEBUG set to 2 or larger, from Zi Shen Lim. 6) Fix uninitialized A and X registers in BPF interpreter, from Alexei Starovoitov. 7) Fix arch dependencies of candence driver. 8) Fix netlink capabilities checking tree-wide, from Eric W Biederman. 9) Don't dump IFLA_VF_PORTS if netlink request didn't ask for it in IFLA_EXT_MASK, from David Gibson. 10) IPV6 FIB dump restart doesn't handle table changes that happen meanwhile, causing the code to loop forever or emit dups, fix from Kumar Sandararajan. 11) Memory leak on VF removal in bnx2x, from Yuval Mintz. 12) Bug fixes for new Altera TSE driver from Vince Bridgers. 13) Fix route lookup key in SCTP, from Xugeng Zhang. 14) Use BH blocking spinlocks in SLIP, as per a similar fix to CAN/SLCAN driver. From Oliver Hartkopp. 15) TCP doesn't bump retransmit counters in some code paths, fix from Eric Dumazet. 16) Clamp delayed_ack in tcp_cubic to prevent theoretical divides by zero. Fix from Liu Yu. 17) Fix locking imbalance in error paths of HHF packet scheduler, from John Fastabend. 18) Properly reference the transport module when vsock_core_init() runs, from Andy King. 19) Fix buffer overflow in cdc_ncm driver, from Bjørn Mork. 20) IP_ECN_decapsulate() doesn't see a correct SKB network header in ip_tunnel_rcv(), fix from Ying Cai. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (132 commits) net: macb: Fix race between HW and driver net: macb: Remove 'unlikely' optimization net: macb: Re-enable RX interrupt only when RX is done net: macb: Clear interrupt flags net: macb: Pass same size to DMA_UNMAP as used for DMA_MAP ip_tunnel: Set network header properly for IP_ECN_decapsulate() e1000e: Restrict MDIO Slow Mode workaround to relevant parts e1000e: Fix issue with link flap on 82579 e1000e: Expand workaround for 10Mb HD throughput bug e1000e: Workaround for dropped packets in Gig/100 speeds on 82579 net/mlx4_core: Don't issue PCIe speed/width checks for VFs net/mlx4_core: Load the Eth driver first net/mlx4_core: Fix slave id computation for single port VF net/mlx4_core: Adjust port number in qp_attach wrapper when detaching net: cdc_ncm: fix buffer overflow Altera TSE: ALTERA_TSE should depend on HAS_DMA vsock: Make transport the proto owner net: sched: lock imbalance in hhf qdisc net: mvmdio: Check for a valid interrupt instead of an error net phy: Check for aneg completion before setting state to PHY_RUNNING ...
2014-04-27arc_emac: add clock handlingHeiko Stübner1-2/+10
This adds ability for the arc_emac to really handle its supplying clock. To get the needed clock-frequency either a real clock or the previous clock-frequency property must be provided. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Max Schwarz <max.schwarz@online.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-26Documentation: add Broadcom SYSTEMPORT Device Tree bindingsFlorian Fainelli1-0/+29
Add the Device Tree bindings documentation for the Broadcom SYSTEMPORT Ethernet MAC controller hardware. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-26devicetree: add at86rf230 bindingsAlexander Aring1-0/+23
This patch adds devicetree bindings for the at86rf230 IEEE 802.15.4 SPI device driver. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-23net: via-rhine: add OF bus bindingAlexey Charkov1-0/+17
This should make the driver usable with VIA/WonderMedia ARM-based Systems-on-Chip integrated Rhine III adapters. Note that these are always in MMIO mode, and don't have any known EEPROM. Signed-off-by: Alexey Charkov <alchark@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-23dt: Fix binding typos in clock-names and interrupt-namesGeert Uytterhoeven2-2/+2
s/interrupts-names/interrupt-names/g s/clocks-names/clock-names/g Some of the binding files and device tree files get this wrong and the kernel won't be able to pick it up. Fix them up now so that they don't get widely used. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by : Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Grant Likely <grant.likely@linaro.org>
2014-04-21NFC: trf7970a: Document the 'autosuspend-delay' DTS propertyMark A. Greer1-0/+2
The trf7970a driver recently had support added for the 'autosuspend-delay' property so document it. Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-04-21NFC: pn544: i2c: Add DTS DocumentationClement Perrochaud1-0/+35
Describe the properties used by the PN544 NFC controller driver. Signed-off-by: Clément Perrochaud <clement.perrochaud@nxp.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-04-16net: phy: add minimal support for QSGMII PHYThomas Petazzoni1-1/+1
This commit adds the necessary definitions for the PHY layer to recognize "qsgmii" as a valid PHY interface. A QSMII interface, as defined at http://en.wikipedia.org/wiki/Media_Independent_Interface#Quad_Serial_Gigabit_Media_Independent_Interface, is "is a method of combining four SGMII lines into a 5Gbit/s interface. QSGMII, like SGMII, uses LVDS signalling for the TX and RX data and a single LVDS clock signal. QSGMII uses significantly fewer signal lines than four SGMII busses." This type of MAC <-> PHY connection might require special handling on the MAC driver side, so it should be possible to express this type of MAC <-> PHY connection, for example in the Device Tree. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: devicetree@vger.kernel.org Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-05Merge tag 'dt-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds2-0/+33
Pull ARM SoC device tree changes from Arnd Bergmann: "A large part of the arm-soc patches are nowadays DT changes, adding support for new SoCs, boards and devices without changing kernel source. The plan is still to move the devicetree files out of the kernel tree and reduce the amount of churn going on here, but we keep finding reasons to delay doing that. Changes are really all over the place, with little sticking out particularly. We have contributions from a total of 116 people in this branch. Unfortunately, the size of this branch also causes a significant number of conflicts at the moment, typically when subsystem maintainers merge patches that change the driver at the same time as the dts files. In most cases this could be avoided because the dts changes are supposed to be compatible in both ways, and we are asking everyone to send ARM dts changes through our tree only" * tag 'dt-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (541 commits) dts: stmmac: Document the clocks property in the stmmac base document dts: socfpga: Add DTS entry for adding the stmmac glue layer for stmmac. ARM: STi: stih41x: Add support for the FSM Serial Flash Controller ARM: STi: stih416: Add support for the FSM Serial Flash Controller ARM: tegra: fix Dalmore pinctrl configuration ARM: dts: keystone: use common "ti,keystone" compatible instead of -evm ARM: dts: k2hk-evm: set ubifs partition size for 512M NAND ARM: dts: Build all keystone dt blobs ARM: dts: keystone: Fix control register range for clktsip ARM: dts: keystone: Fix domain register range for clkfftc1 ARM: dts: bcm28155-ap: leave camldo1 on to fix reboot ARM: dts: add bcm590xx pmu support and enable for bcm28155-ap ARM: dts: bcm21664: Add device tree files. ARM: DT: bcm21664: Device tree bindings ARM: efm32: properly namespace i2c location property ARM: efm32: fix unit address part in USART2 device nodes' names ARM: mvebu: Enable NAND controller in Armada 385-DB ARM: mvebu: Add support for NAND controller in Armada 38x SoC ARM: mvebu: Add the Core Divider clock to Armada 38x SoCs ARM: mvebu: Add a 2 GHz fixed-clock on Armada 38x SoCs ...
2014-03-29dts: stmmac: Document the clocks property in the stmmac base documentDinh Nguyen1-0/+6
Add the clocks and clock-names property to the base stmmac dts bindings document. Signed-off-by: Dinh Nguyen <dinguyen@altera.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-03-29dts: socfpga: Add DTS entry for adding the stmmac glue layer for stmmac.Dinh Nguyen1-0/+27
This patch adds the dts bindings documenation for the Altera SOCFPGA glue layer for the Synopsys STMMAC ethernet driver. Signed-off-by: Dinh Nguyen <dinguyen@altera.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-03-26sxgbe: Add device-tree binding support documentSiva Reddy1-0/+52
This patch adds binding document for SXGBE ethernet driver via device-tree. Signed-off-by: Siva Reddy Kallam <siva.kallam@samsung.com> Signed-off-by: Byungho An <bh74.an@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-0/+3
Conflicts: Documentation/devicetree/bindings/net/micrel-ks8851.txt net/core/netpoll.c The net/core/netpoll.c conflict is a bug fix in 'net' happening to code which is completely removed in 'net-next'. In micrel-ks8851.txt we simply have overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-24net: micrel : ks8851-ml: add vdd-supply supportNishanth Menon1-0/+1
Few platforms use external regulator to keep the ethernet MAC supplied. So, request and enable the regulator for driver functionality. Fixes: 66fda75f47dc (regulator: core: Replace direct ops->disable usage) Reported-by: Russell King <rmk+kernel@arm.linux.org.uk> Suggested-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-21Merge branch 'master' of ↵John W. Linville1-0/+34
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
2014-03-20dt: Document a compatible entry for MDIO ethernet PhysJason Gunthorpe1-1/+9
This describes a compatible entry of the form: ethernet-phy-idAAAA,BBBB Which is modelled after the PCI structured compatible entry (pciVVVV,DDDD.SSSS.ssss.RR) If present the OF core will be able to use this information to directly create the correct phy without auto probing the bus. Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

Privacy Policy