aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/media/rc/fintek-cir.c
AgeCommit message (Collapse)AuthorFilesLines
2014-09-03[media] fintek-cir: just return 0 instead of using a varMauro Carvalho Chehab1-4/+2
Instead of allocating a var to store 0 and just return it, change the code to return 0 directly. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-25[media] rc-core: fix various sparse warningsDavid Härdeman1-2/+2
Fix various sparse warnings under drivers/media/rc/*.c, mostly by making functions static. Signed-off-by: David Härdeman <david@hardeman.nu> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-25[media] rc-core: remove protocol arraysDavid Härdeman1-1/+1
The basic API of rc-core used to be: dev = rc_allocate_device(); dev->x = a; dev->y = b; dev->z = c; rc_register_device(); which is a pretty common pattern in the kernel, after the introduction of protocol arrays the API looks something like: dev = rc_allocate_device(); dev->x = a; rc_set_allowed_protocols(dev, RC_BIT_X); dev->z = c; rc_register_device(); There's no real need for the protocols to be an array, so change it back to be consistent (and in preparation for the following patches). [m.chehab@samsung.com: added missing changes at some files] Signed-off-by: David Härdeman <david@hardeman.nu> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-11[media] rc: abstract access to allowed/enabled protocolsJames Hogan1-1/+1
The allowed and enabled protocol masks need to be expanded to be per filter type in order to support wakeup filter protocol selection. To ease that process abstract access to the rc_dev::allowed_protos and rc_dev::enabled_protocols members with inline functions. Signed-off-by: James Hogan <james.hogan@imgtec.com> Reviewed-by: Antti Seppälä <a.seppala@gmail.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-01-24Merge branch 'v4l_for_linus' into staging/for_v3.9Mauro Carvalho Chehab1-2/+2
* v4l_for_linus: (464 commits) [media] uvcvideo: Set error_idx properly for S_EXT_CTRLS failures [media] uvcvideo: Cleanup leftovers of partial revert [media] uvcvideo: Return -EACCES when trying to set a read-only control Linux 3.8-rc3 mm: reinstante dropped pmd_trans_splitting() check cred: Remove tgcred pointer from struct cred drm/ttm: fix fence locking in ttm_buffer_object_transfer ARM: clps711x: Fix bad merge of clockevents setup ARM: highbank: save and restore L2 cache and GIC on suspend ARM: highbank: add a power request clear ARM: highbank: fix secondary boot and hotplug ARM: highbank: fix typos with hignbank in power request functions ARM: dts: fix highbank cpu mpidr values ARM: dts: add device_type prop to cpu nodes on Calxeda platforms drm/prime: drop reference on imported dma-buf come from gem xen/netfront: improve truesize tracking ARM: mx5: Fix MX53 flexcan2 clock ARM: OMAP2+: am33xx-hwmod: Fix wrongly terminated am33xx_usbss_mpu_irqs array sctp: fix Kconfig bug in default cookie hmac selection EDAC: Cleanup device deregistering path ... Conflicts: drivers/media/pci/dm1105/dm1105.c drivers/media/platform/soc_camera/mx2_camera.c
2013-01-03Drivers: media: remove __dev* attributes.Greg Kroah-Hartman1-2/+2
CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-21[media] rc: Set rdev before irq setupMatthijs Kooijman1-1/+3
This fixes a problem in fintek-cir and nuvoton-cir where the irq handler would trigger during module load before the rdev member was set, causing a NULL pointer crash. It seems this crash is very reproducible (just bombard the receiver with IR signals during module load), probably because when request_irq is called, any pending intterupt is handled immediately, before request_irq returns and rdev can be set. This same crash was supposed to be fixed by commit 9ef449c6b31bb6a8e6dedc24de475a3b8c79be20 ("[media] rc: Postpone ISR registration"), but the crash was still observed on the nuvoton-cir driver. This commit was tested on nuvoton-cir only. Cc: Jarod Wilson <jarod@redhat.com> Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-12-21[media] rc: Make probe cleanup goto labels more verboseMatthijs Kooijman1-10/+10
Before, labels were simply numbered. Now, the labels are named after the cleanup action they'll perform (first), based on how the winbond-cir driver does it. This makes the code a bit more clear and makes changes in the ordering of labels easier to review. This change is applied only to the rc drivers that do significant cleanup in their probe functions: ati-remote, ene-ir, fintek-cir, gpio-ir-recv, ite-cir, nuvoton-cir. This commit should not change any code, it just renames goto labels. [mchehab@redhat.com: removed changes at gpio-ir-recv.c, due to merge conflicts] Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-28fintek-cir: get rid of warning: no previous prototypeMauro Carvalho Chehab1-2/+2
Cc: Linux Media Mailing List <linux-media@vger.kernel.org> drivers/media/rc/fintek-cir.c:687:5: warning: no previous prototype for 'fintek_init' [-Wmissing-prototypes] drivers/media/rc/fintek-cir.c:692:6: warning: no previous prototype for 'fintek_exit' [-Wmissing-prototypes] Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-27[media] rc-core: add separate defines for protocol bitmaps and numbersDavid Härdeman1-1/+1
The RC_TYPE_* defines are currently used both where a single protocol is expected and where a bitmap of protocols is expected. Functions like rc_keydown() and functions which add/remove entries to the keytable want a single protocol. Future userspace APIs would also benefit from numeric protocols (rather than bitmap ones). Keytables are smaller if they can use a small(ish) integer rather than a bitmap. Other functions or struct members (e.g. allowed_protos, enabled_protocols, etc) accept multiple protocols and need a bitmap. Using different types reduces the risk of programmer error. Using a protocol enum whereever possible also makes for a more future-proof user-space API as we don't need to worry about a sufficient number of bits being available (e.g. in structs used for ioctl() calls). The use of both a number and a corresponding bit is dalso one in e.g. the input subsystem as well (see all the references to set/clear bit when changing keytables for example). This patch separate the different usages in preparation for upcoming patches. Where a single protocol is expected, enum rc_type is used; where one or more protocol(s) are expected, something like u64 is used. The patch has been rewritten so that the format of the sysfs "protocols" file is no longer altered (at the loss of some detail). The file itself should probably be deprecated in the future though. Signed-off-by: David Härdeman <david@hardeman.nu> Cc: Andy Walls <awalls@md.metrocast.net> Cc: Maxim Levitsky <maximlevitsky@gmail.com> Cc: Antti Palosaari <crope@iki.fi> Cc: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-13[media] rc: do not wake up rc thread unless there is something to doSean Young1-3/+8
The TechnoTrend USB IR Receiver sends 125 ISO URBs per second, even when there is no IR activity. Reduce the number of wake ups from the other drivers too. This saves about 0.25ms/s on a 2.4GHz Core 2 according to powertop. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-07-06[media] media: Use pr_info not homegrown pr_reg macroJoe Perches1-14/+18
No need to duplicate normal kernel logging capabilities. Add pr_fmt and convert pr_reg to pr_info. Remove pr_reg macros. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-20[media] rc: Fix invalid free_region and/or free_irq on probe failureBen Hutchings1-7/+6
fintek-cir, ite-cir and nuvoton-cir may try to free an I/O region and/or IRQ handler that was never allocated after a failure in their respective probe functions. Add and use separate labels on the failure path so they will do the right cleanup after each possible point of failure. Compile-tested only. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-26[media] fintek-cir: change || to &&Dan Carpenter1-1/+1
The current condition is always true, so everything uses LOGICAL_DEV_CIR_REV2 (8). It should be that Fintek products 0x0408(F71809) and 0x0804(F71855) use logical device LOGICAL_DEV_CIR_REV1 (5) and other chip ids use logical device 8. In other words, this fixes hardware detection for 0x0408 and 0x0804. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Jarod Wilson <jarod@redhat.com> Cc: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-26[media] rc: Postpone ISR registrationLuis Henriques1-10/+10
An early registration of an ISR was causing a crash to several users (for example, with the ite-cir driver: http://bugs.launchpad.net/bugs/972723). The reason was that IRQs were being triggered before a driver initialisation was completed. This patch fixes this by moving the invocation to request_irq() and to request_region() to a later stage on the driver probe function. Cc: <stable@vger.kernel.org> Signed-off-by: Luis Henriques <luis.henriques@canonical.com> Acked-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-02-14[media] fintek-cir: add support for newer chip versionMauro Carvalho Chehab1-8/+18
Acked-by: Jarod Wilson <jarod@redhat.com> Reviewed-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-06-11[media] fintek-cir: make suspend with active IR more reliableJarod Wilson1-0/+5
There was a missing lock in fintek_suspend. Without the lock, its possible the system will be in the middle of receiving IR (draining the RX buffer) when we try to disable CIR interrupts. Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-25[media] fintek-cir: new driver for Fintek LPC SuperIO CIR functionJarod Wilson1-0/+684
This is a new driver for the Fintek LPC SuperIO CIR function, in the Fintek F71809 chip. Hardware and datasheets were provided by Fintek, so thanks go to them for supporting this effort. This driver started out as a copy of the nuvoton-cir driver, and was then modified as needed for the Fintek chip. The two share many similaries, though the buffer handling for the Fintek chip is actually nearly identical to the mceusb buffer handling, so the parser routine is almost a drop-in copy of the mceusb buffer parser (a candidate for being abstracted out into shared code at some point). This initial code drop *only* supports receive, but the hardware does support transmit as well. I really haven't even started to look at what's required, but my guess is that its also pretty similar to mceusb. Most people are probably only really interested in RX anyway though, so I think its good to get this out there even with only RX. (Nb: there are also Fintek-made mceusb receivers, which presumably, this chip shares CIR hardware with). This hardware can be found on at least Jetway NC98 boards and derivative systems, and likely others as well. Functionality was tested with an NC98 development board, in-kernel decode of RC6 (mce), RC5 (hauppauge) and NEC-ish (tivo) remotes all successful, as was lirc userspace decode of the RC6 remote. CC: Aaron Huang <aaron_huang@fintek.com.tw> CC: Tom Tsai <tom_tsai@fintek.com.tw> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Privacy Policy