aboutsummaryrefslogtreecommitdiffstats
path: root/net/dsa
AgeCommit message (Collapse)AuthorFilesLines
2014-12-14Merge tag 'driver-core-3.19-rc1' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core update from Greg KH: "Here's the set of driver core patches for 3.19-rc1. They are dominated by the removal of the .owner field in platform drivers. They touch a lot of files, but they are "simple" changes, just removing a line in a structure. Other than that, a few minor driver core and debugfs changes. There are some ath9k patches coming in through this tree that have been acked by the wireless maintainers as they relied on the debugfs changes. Everything has been in linux-next for a while" * tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits) Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries" fs: debugfs: add forward declaration for struct device type firmware class: Deletion of an unnecessary check before the function call "vunmap" firmware loader: fix hung task warning dump devcoredump: provide a one-way disable function device: Add dev_<level>_once variants ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries ath: use seq_file api for ath9k debugfs files debugfs: add helper function to create device related seq_file drivers/base: cacheinfo: remove noisy error boot message Revert "core: platform: add warning if driver has no owner" drivers: base: support cpu cache information interface to userspace via sysfs drivers: base: add cpu_device_create to support per-cpu devices topology: replace custom attribute macros with standard DEVICE_ATTR* cpumask: factor out show_cpumap into separate helper function driver core: Fix unbalanced device reference in drivers_probe driver core: fix race with userland in device_add() sysfs/kernfs: make read requests on pre-alloc files use the buffer. sysfs/kernfs: allow attributes to request write buffer be pre-allocated. fs: sysfs: return EGBIG on write if offset is larger than file size ...
2014-12-11net: dsa: propagate error code from dsa_slave_phy_setupFlorian Fainelli1-4/+11
In case we cannot attach to our slave netdevice PHY, error out and propagate that error up to the caller: dsa_slave_create(). Fixes: 0d8bcdd383b8 ("net: dsa: allow for more complex PHY setups") Signed-off-by: Andrey Volkov <andrey.volkov@nexvision.fr> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-11net: dsa: handle non-existing PHYs on switch internal busFlorian Fainelli1-0/+3
In case there is no PHY at the designated address on the internal switch, we would basically de-reference a null pointer here: dsa_slave_phy_setup(...) { p->phy = ds->slave_mii_bus->phy_map[p->port]; phy_connect_direct(slave_dev, p->phy, dsa_slave_adjust_link, ^------ This can be triggered when the platform configuration (platform_data or Device Tree) indicates there should be a PHY device at this address, but the HW is non-responsive, such that we cannot attach a PHY device at this specific location. Fix this by checking the return value prior to calling phy_connect_direct(). CC: Andrew Lunn <andrew@lunn.ch> Fixes: b31f65fb4383 ("net: dsa: slave: Fix autoneg for phys on switch MDIO bus") Reported-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Andrey Volkov <andrey.volkov@nexvision.fr> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-16net: dsa: replace count*size kzalloc by kcallocFabian Frederick1-2/+2
kcalloc manages count*sizeof overflow. Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-16net: dsa: replace count*size kmalloc by kmalloc_arrayFabian Frederick1-1/+2
kmalloc_array manages count*sizeof overflow. Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-11dsa: Use netdev_<level> instead of printkJoe Perches2-21/+17
Neaten and standardize the logging output. Other miscellanea: o Use pr_notice_once instead of a guard flag. o Convert existing pr_<level> uses too. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-2/+5
2014-11-06net: dsa: slave: Fix autoneg for phys on switch MDIO busAndrew Lunn1-2/+5
When the ports phys are connected to the switches internal MDIO bus, we need to connect the phy to the slave netdev, otherwise auto-negotiation etc, does not work. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-03Merge branch 'platform/remove_owner' of ↵Greg Kroah-Hartman1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux into driver-core-next Remove all .owner fields from platform drivers
2014-11-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+4
Conflicts: drivers/net/phy/marvell.c Simple overlapping changes in drivers/net/phy/marvell.c Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-30net: dsa: Add support for reading switch registers with ethtoolGuenter Roeck1-0/+23
Add support for reading switch registers with 'ethtool -d'. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-30net: dsa: Add support for switch EEPROM accessGuenter Roeck2-0/+45
On some chips it is possible to access the switch eeprom. Add infrastructure support for it. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-30net: dsa: Add support for reporting switch chip temperaturesGuenter Roeck2-0/+142
Some switches provide chip temperature data. Add support for reporting it through the hwmon subsystem. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-30net: dsa: Don't set skb->protocol on outgoing tagged packetsGuenter Roeck3-6/+0
Setting skb->protocol to a private protocol type may result in warning messages such as e1000e 0000:00:19.0 em1: checksum_partial proto=dada! This happens if the L3 protocol is IP or IPv6 and skb->ip_summed is set to CHECKSUM_PARTIAL. Looking through the code, it appears that changing skb->protocol for transmitted packets is not necessary and may actually be harmful. For example, it prevents purposely unmodified (from a DSA perspective) network drivers from properly setting up their transmit checksum offload pointers since they inspect skb->protocol to set up the IPv4 header or IPv6 header pointers. So don't unnecessarily change the protocol field. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-28net: dsa: Error out on tagging protocol mismatchesAndrew Lunn1-1/+4
If there is a mismatch between enabled tagging protocols and the protocol the switch supports, error out, rather than continue with a situation which is unlikely to work. Signed-off-by: Andrew Lunn <andrew@lunn.ch> cc: alexander.h.duyck@intel.com Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-20net: dsa: drop owner assignment from platform_driversWolfram Sang1-1/+0
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-10-19Net: DSA: Fix checking for get_phy_flags functionAndrew Lunn1-1/+1
The check for the presence or not of the optional switch function get_phy_flags() called the function, rather than checked to see if it is a NULL pointer. This causes a derefernce of a NULL pointer on all switch chips except the sf2, the only switch to implement this call. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Fixes: 6819563e646a ("net: dsa: allow switch drivers to specify phy_device::dev_flags") Cc: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-17net: dsa: add includes for ethtool and phy_fixed definitionsFlorian Fainelli1-0/+1
net/dsa/slave.c uses functions and structures declared in phy_fixed.h but does not explicitely include it, while dsa.h needs structure declarations for 'struct ethtool_wolinfo' and 'struct ethtool_eee', fix those by including the correct header files. Fixes: ec9436baedb6 ("net: dsa: allow drivers to do link adjustment") Fixes: ce31b31c68e7 ("net: dsa: allow updating fixed PHY link information") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-04net: dsa: do not call phy_start_anegFlorian Fainelli1-1/+0
Commit f7f1de51edbd ("net: dsa: start and stop the PHY state machine") add calls to phy_start() in dsa_slave_open() respectively phy_stop() in dsa_slave_close(). We also call phy_start_aneg() in dsa_slave_create(), and this call is messing up with the PHY state machine, since we basically start the auto-negotiation, and later on restart it when calling phy_start(). phy_start() does not currently handle the PHY_FORCING or PHY_AN states properly, but such a fix would be too invasive for this window. Fixes: f7f1de51edbd ("net: dsa: start and stop the PHY state machine") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-01net: dsa: Fix build warning for !PM_SLEEPThierry Reding1-0/+2
The dsa_switch_suspend() and dsa_switch_resume() functions are only used when PM_SLEEP is enabled, so they need #ifdef CONFIG_PM_SLEEP protection to avoid a compiler warning. Signed-off-by: Thierry Reding <treding@nvidia.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-28net: dsa: allow switches driver to implement get/set EEEFlorian Fainelli1-0/+40
Allow switches driver to query and enable/disable EEE on a per-port basis by implementing the ethtool_{get,set}_eee settings and delegating these operations to the switch driver. set_eee() will need to coordinate with the PHY driver to make sure that EEE is enabled, the link-partner supports it and the auto-negotiation result is satisfactory. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-28net: dsa: allow enabling and disable switch portsFlorian Fainelli1-0/+14
Whenever a per-port network device is used/unused, invoke the switch driver port_enable/port_disable callbacks to allow saving as much power as possible by disabling unused parts of the switch (RX/TX logic, memory arrays, PHYs...). We supply a PHY device argument to make sure the switch driver can act on the PHY device if needed (like putting/taking the PHY out of deep low power mode). Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-28net: dsa: start and stop the PHY state machineFlorian Fainelli1-0/+6
dsa_slave_open() should start the PHY library state machine for its PHY interface, and dsa_slave_close() should stop the PHY library state machine accordingly. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-22net: dsa: add {get, set}_wol callbacks to slave devicesFlorian Fainelli1-0/+23
Allow switch drivers to implement per-port Wake-on-LAN getter and setters. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-22net: dsa: allow switch drivers to implement suspend/resume hooksFlorian Fainelli3-0/+113
Add an abstraction layer to suspend/resume switch devices, doing the following split: - suspend/resume the slave network devices and their corresponding PHY devices - suspend/resume the switch hardware using switch driver callbacks Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-19net: dsa: allow switch drivers to specify phy_device::dev_flagsFlorian Fainelli1-1/+8
Some switch drivers (e.g: bcm_sf2) may have to communicate specific workarounds or flags towards the PHY device driver. Allow switches driver to be delegated that task by introducing a get_phy_flags() callback which will do just that. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-15net: dsa: fix mii_bus to host_dev replacementFlorian Fainelli1-1/+1
dsa_of_probe() still used cd->mii_bus instead of cd->host_dev when building with CONFIG_OF=y. Fix this by making the replacement here as well. Fixes: b4d2394d01b ("dsa: Replace mii_bus with a generic host device") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-15dsa: Replace mii_bus with a generic host deviceAlexander Duyck2-17/+9
This change makes it so that instead of passing and storing a mii_bus we instead pass and store a host_dev. From there we can test to determine the exact type of device, and can verify it is the correct device for our switch. So for example it would be possible to pass a device pointer from a pci_dev and instead of checking for a PHY ID we could check for a vendor and/or device ID. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-15dsa: Split ops up, and avoid assigning tag_protocol and receive separatelyAlexander Duyck7-31/+53
This change addresses several issues. First, it was possible to set tag_protocol without setting the ops pointer. To correct that I have reordered things so that rcv is now populated before we set tag_protocol. Second, it didn't make much sense to keep setting the device ops each time a new slave was registered. So by moving the receive portion out into root switch initialization that issue should be addressed. Third, I wanted to avoid sending tags if the rcv pointer was not registered so I changed the tag check to verify if the rcv function pointer is set on the root tree. If it is then we start sending DSA tagged frames. Finally I split the device ops pointer in the structures into two spots. I placed the rcv function pointer in the root switch since this makes it easiest to access from there, and I placed the xmit function pointer in the slave for the same reason. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-13net: dsa: change tag_protocol to an enumFlorian Fainelli2-5/+4
Now that we introduced an additional multiplexing/demultiplexing layer with commit 3e8a72d1dae37 ("net: dsa: reduce number of protocol hooks") that lives within the DSA code, we no longer need to have a given switch driver tag_protocol be an actual ethertype value, instead, we can replace it with an enum: dsa_tag_protocol. Do this replacement in the drivers, which allows us to get rid of the cpu_to_be16()/htons() dance, and remove ETH_P_BRCMTAG since we do not need it anymore. Suggested-by: Alexander Duyck <alexander.duyck@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-01net: dsa: make dsa_pack_type staticFlorian Fainelli1-1/+1
net/dsa/dsa.c:624:20: sparse: symbol 'dsa_pack_type' was not declared. Should it be static? Fixes: 3e8a72d1dae374 ("net: dsa: reduce number of protocol hooks") Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-27net: dsa: add Broadcom SF2 switch driverFlorian Fainelli1-0/+1
Add support for the Broadcom Starfigther 2 switch chip using a DSA driver. This switch driver supports the following features: - configuration of the external switch port interface: MII, RevMII, RGMII and RGMII_NO_ID are supported - support for the per-port MIB counters - support for link interrupts for special ports (e.g: MoCA) - powering up/down of switch memories to conserve power when ports are unused Finally, update the compatible property for the DSA core code to match our switch top-level compatible node. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-27net: dsa: add Broadcom tag RX/TX handlerFlorian Fainelli5-0/+185
Add support for the 4-bytes Broadcom tag that built-in switches such as the Starfighter 2 might insert when receiving packets, or that we need to insert while targetting specific switch ports. We use a fake local EtherType value for this 4-bytes switch tag: ETH_P_BRCMTAG to make sure we can assign DSA-specific network operations within the DSA drivers. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-27net: dsa: allow updating fixed PHY link informationFlorian Fainelli1-0/+17
Allow switch drivers to hook a PHY link update callback to perform port-specific link work. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-27net: dsa: allow drivers to do link adjustmentFlorian Fainelli1-0/+4
Whenever libphy determines that the link status of a given PHY/port has changed, allow to call into the switch driver link adjustment callback so proper actions can be taken care of by the switch driver upon link notification. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-27net: dsa: allow switches to work without taggingFlorian Fainelli1-1/+18
In case switch port tagging is disabled (voluntarily, or the switch just does not support it), allow us to continue using the defined set of dsa_device_ops in net/dsa/slave.c. We introduce dsa_protocol_is_tagged() to check whether we need to override skb->protocol and go through the DSA-specifif packet_type function, or if we just go on and receive the SKB through the normal path. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-27net: dsa: allow for more complex PHY setupsFlorian Fainelli3-3/+82
Modify the DSA slave interface to be bound to an arbitray PHY, not just the ones that are available as child PHY devices of the switch MDIO bus. This allows us for instance to have external PHYs connected to a separate MDIO bus, but yet also connected to a given switch port. Under certain configurations, the physical port mask might not be a 1:1 mapping to the MII PHYs mask. This is the case, if e.g: Port 1 of the switch is used and connects to a PHY at a MDIO address different than 1. Introduce a phys_mii_mask variable which allows driver to implement and divert their own MDIO read/writes operations for a subset of the MDIO PHY addresses. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-27net: dsa: retain a per-port device_node pointerFlorian Fainelli2-0/+3
We will later use the per-port device_node pointer to fetch a bunch of port-specific properties. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-27net: dsa: provide a switch device device tree node pointerFlorian Fainelli1-0/+1
We might need to fetch additional resources from the device tree node pointer, such as register ranges or other properties. Keep a device_node pointer around for this. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-27net: dsa: reduce number of protocol hooksFlorian Fainelli6-67/+50
DSA is currently registering one packet_type function per EtherType it needs to intercept in the receive path of a DSA-enabled Ethernet device. Right now we have three of them: trailer, DSA and eDSA, and there might be more in the future, this will not scale to the addition of new protocols. This patch proceeds with adding a new layer of abstraction and two new functions: dsa_switch_rcv() which will dispatch into the tag-protocol specific receive function implemented by net/dsa/tag_*.c dsa_slave_xmit() which will dispatch into the tag-protocol specific transmit function implemented by net/dsa/tag_*.c When we do create the per-port slave network devices, we iterate over the switch protocol to assign the DSA-specific receive and transmit operations. A new fake ethertype value is used: ETH_P_XDSA to illustrate the fact that this is no longer going to look like ETH_P_DSA or ETH_P_TRAILER like it used to be. This allows us to greatly simplify the check in eth_type_trans() and always override the skb->protocol with ETH_P_XDSA for Ethernet switches tagged protocol, while also reducing the number repetitive slave netdevice_ops assignments. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-15net: set name_assign_type in alloc_netdev()Tom Gundersen1-2/+2
Extend alloc_netdev{,_mq{,s}}() to take name_assign_type as argument, and convert all users to pass NET_NAME_UNKNOWN. Coccinelle patch: @@ expression sizeof_priv, name, setup, txqs, rxqs, count; @@ ( -alloc_netdev_mqs(sizeof_priv, name, setup, txqs, rxqs) +alloc_netdev_mqs(sizeof_priv, name, NET_NAME_UNKNOWN, setup, txqs, rxqs) | -alloc_netdev_mq(sizeof_priv, name, setup, count) +alloc_netdev_mq(sizeof_priv, name, NET_NAME_UNKNOWN, setup, count) | -alloc_netdev(sizeof_priv, name, setup) +alloc_netdev(sizeof_priv, name, NET_NAME_UNKNOWN, setup) ) v9: move comments here from the wrong commit Signed-off-by: Tom Gundersen <teg@jklm.no> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-25net/dsa/dsa.c: remove unnecessary null test before kfreeFabian Frederick1-2/+1
Fix checkpatch warning: WARNING: kfree(NULL) is safe this check is probably not required Cc: "David S. Miller" <davem@davemloft.net> Cc: Grant Likely <grant.likely@linaro.org> Cc: netdev@vger.kernel.org Cc: Joe Perches <joe@perches.com> Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+2
Conflicts: drivers/net/bonding/bond_alb.c drivers/net/ethernet/altera/altera_msgdma.c drivers/net/ethernet/altera/altera_sgdma.c net/ipv6/xfrm6_output.c Several cases of overlapping changes. The xfrm6_output.c has a bug fix which overlaps the renaming of skb->local_df to skb->ignore_df. In the Altera TSE driver cases, the register access cleanups in net-next overlapped with bug fixes done in net. Similarly a bug fix to send ALB packets in the bonding driver using the right source address overlaps with cleanups in net-next. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16net/dsa/dsa.c: increment chip_index during of_node handling on dsa_of_probe()Fabian Godehardt1-1/+2
Adding more than one chip on device-tree currently causes the probing routine to always use the first chips data pointer. Signed-off-by: Fabian Godehardt <fg@emlix.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-13net: get rid of SET_ETHTOOL_OPSWilfried Klaebe1-1/+1
net: get rid of SET_ETHTOOL_OPS Dave Miller mentioned he'd like to see SET_ETHTOOL_OPS gone. This does that. Mostly done via coccinelle script: @@ struct ethtool_ops *ops; struct net_device *dev; @@ - SET_ETHTOOL_OPS(dev, ops); + dev->ethtool_ops = ops; Compile tested only, but I'd seriously wonder if this broke anything. Suggested-by: Dave Miller <davem@davemloft.net> Signed-off-by: Wilfried Klaebe <w-lkml@lebenslange-mailadresse.de> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-21dsa: Use ether_addr_copyJoe Perches1-1/+1
Use ether_addr_copy instead of memcpy(a, b, ETH_ALEN) to save some cycles on arm and powerpc. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-03net: dsa: inherit addr_assign_type along with dev_addrBjørn Mork1-1/+1
A device inheriting a random or set address should reflect this in its addr_assign_type. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-25dsa: fix freeing of sparse port allocationFlorian Fainelli1-3/+5
If we have defined a sparse port allocation which is non-contiguous and contains gaps, the code freeing port_names will just stop when it encouters a first NULL port_names, which is not right, we should iterate over all possible number of ports (DSA_MAX_PORTS) until we are done. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-25dsa: factor freeing of dsa_platform_dataFlorian Fainelli1-20/+18
This patch factors the freeing of the struct dsa_platform_data manipulated by the driver identically in two places to a single function. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-24dsa: add device tree bindings to register DSA switchesFlorian Fainelli1-5/+228
This patch adds support for registering DSA switches using Device Tree bindings. Note that we support programming the switch routing table even though no in-tree user seems to require it. I tested this on Armada 370 with a Marvell 88E6172 (not supported by mainline yet). Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>

Privacy Policy