aboutsummaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2015-07-17[media] coda: make NV12 format defaultHEADmasterPhilipp Zabel1-14/+14
The chroma interleaved NV12 format has higher memory bandwidth efficiency because the chroma planes can be read/written with longer burst lengths. Use NV12 as default format if available and consistently sort it first. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-07-17[media] coda: add macroblock tiling supportPhilipp Zabel6-70/+221
Storing internal frames in macroblock tiled order improves memory access patterns by allowing increased burst sizes when transferring the uncompressed macroblocks to or from main memory. The translation logic only supports a single chroma base address, so this is only supported for the chroma interleaved NV12 format. Since the rotator used to copy the decoder output into the v4l2 capture buffers does not seem to support the tiled format correctly, only enable it in the encoder for now. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-07-17[media] coda: move cache setup into coda9_set_frame_cache, also use it in ↵Philipp Zabel1-20/+25
start_encoding The frame cache should be set up correctly to encode NV12 source frames. This was not done before, so move the cache setup out of start_decoding into its own function and call it from both start_encoding and start_decoding. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-07-17[media] coda: Use S_PARM to set nominal framerate for h.264 encoderPhilipp Zabel2-0/+106
The encoder needs to know the nominal framerate for the constant bitrate control mechanism to work. Currently the only way to set the framerate is by using VIDIOC_S_PARM on the output queue. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-07-17[media] coda: implement VBV delay and buffer size controlsPhilipp Zabel3-1/+20
The encoder allows to specify the VBV model reference decoder's initial delay and buffer size. Export the corresponding V4L2 controls. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-07-17[media] coda: reset CODA960 hardware after sequence endPhilipp Zabel1-0/+8
On i.MX6, sometimes after decoding a stream, encoding will produce macroblock errors caused by missing 8-byte sequences in the output stream. Until the cause for this is found, reset the hardware after sequence end, which seems to help. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-07-17[media] coda: rework meta counting and add separate lockPhilipp Zabel3-14/+25
Keep count of number of buffer meta structures in the list and use a separate spinlock for operations on this counted list instead of reusing the bitstream mutex in some places and none at all in others. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-07-17[media] coda: reuse src_bufs in coda_job_readyPhilipp Zabel1-8/+5
The v4l2_m2m_num_src_bufs_ready() function is called in multiple places in coda_cob_ready, and there already is a variable src_bufs that is assigned to its result. Move it to the beginning and use it everywhere. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-07-17[media] coda: use event class to deduplicate v4l2 trace eventsPhilipp Zabel2-65/+26
Trace events with exactly the same parameters and trace output, such as coda_enc_pic_run and coda_enc_pic_done, are supposed to use the DECLARE_EVENT_CLASS and DEFINE_EVENT macros instead of duplicated TRACE_EVENT macro calls. This patch changes the order of parameters to coda_dec_rot_done and adds a timestamp so it can share an event class with coda_bit_queue. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-07-17[media] coda: drop custom list of pixel format descriptionsPhilipp Zabel1-68/+7
Since commit ba3002045f80 ("[media] v4l2-ioctl: fill in the description for VIDIOC_ENUM_FMT"), all pixel formats are assigned their description in a central place. We can now drop the custom list. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-07-17[media] coda: reset stream end in stop_streamingPhilipp Zabel1-0/+3
Otherwise a restarted stream won't queue buffers. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-07-17[media] coda: avoid calling SEQ_END twicePhilipp Zabel2-3/+9
Allow coda_seq_end_work to be called multiple times, move the setting of ctx->initialized from coda_start/stop_streaming() into coda_start_encoding/decoding and coda_seq_end_work, respectively, and skip the SEQ_END command in coda_seq_end_work if the context is already deinitialized before. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-07-17[media] coda: keep buffers on the queue in bitstream end modePhilipp Zabel1-0/+3
In stream end mode the hardware will read the bitstream to its end, overshooting the write pointer. Do not write additional data into the bitstream in this mode. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-07-17[media] coda: fix bitstream preloading for MPEG4 decodingPhilipp Zabel1-3/+1
All decoder instances using the BIT processor should preload buffers into the bitstream ring buffer, including MPEG4 decoding. Fix this by explicitly stating the above condition instead of listing all relevant input formats. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-07-17[media] coda: fix mvcol buffer for MPEG4 decodingPhilipp Zabel1-1/+1
The mvcol buffer is allocated at the end of the first internal buffer. This patch fixes an out of bounds array access. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-07-17[media] coda: clamp frame sequence counters to 16 bitLucas Stach1-1/+8
This is already done for one side of the comparison with the expectation that the HW counter rolls over at the 16 bit boundary. This is true when decoding a h.264 stream, but doesn't hold for at least MJPEG. As we don't know the exact wrap-around point for this format just clamp the HW counter to the same 16 bits. This should be enough to detect most of the errors and saves us from doing different comparisons based on the decoded format. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-07-17[media] v4l: vsp1: Don't sleep in atomic contextLaurent Pinchart2-11/+11
The vsp1_entity_is_streaming() function is called in atomic context when queuing buffers, and sleeps due to a mutex. As the mutex just protects access to one structure field, fix this by replace the mutex with a spinlock. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-07-17[media] v4l: vsp1: Fix plane stride and size checksLaurent Pinchart1-1/+1
The checks need to be performed on up to two planes, as the third plane, if present, must have the same stride and size as the second plane. The code incorrectly performs the checks on at least two planes instead of at most two planes, fix it. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-07-17[media] v4l: xilinx: missing error codeDan Carpenter1-1/+3
We should set "ret" on this error path instead of returning success. Fixes: df3305156f98 ('[media] v4l: xilinx: Add Xilinx Video IP core') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Hyun Kwon <hyun.kwon@xilinx.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-07-17[media] Driver for Toshiba TC358743 HDMI to CSI-2 bridgeMats Randgaard7-0/+2611
The driver is tested on our hardware and all the implemented features works as expected. Missing features: - CEC support - HDCP repeater support - IR support Signed-off-by: Mats Randgaard <matrandg@cisco.com> [hans.verkuil@cisco.com: updated copyright year to 2015] [hans.verkuil@cisco.com: update confusing confctl_mutex comment] Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-07-17[media] bdisp: fix debug info memory accessFabien Dessenne1-2/+2
bdisp_dev->dbg.copy_node shall be a copy of (and not point to) bdisp_ctx->node, since this resource is freed upon driver release. Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-07-17[media] bdisp: add debug info for RGB24 formatFabien Dessenne1-0/+8
Add this missing debug information Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-07-17[media] bdisp: composing supportFabien Dessenne2-29/+55
Support the composing (at VIDEO_CAPTURE) with the _selection API. v4l2-compliance successfully run ("test Composing: OK") Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-07-17[media] stk1160: Add frame scaling supportEzequiel Garcia2-28/+207
This commit implements frame decimation for stk1160, which allows to support format changes instead of a static frame size. The stk1160 supports independent row and column decimation, in two different modes: * set a number of rows/columns units to skip for each unit sent. * set a number of rows/columns units to send for each unit skipped. This effectively allows to achieve different frame scaling ratios. The unit number can be set to either two row/columns sent/skipped, or four row/columns sent/skipped. Since the video format (UYVY) has 4-bytes, using a unit number of two row/columns results in frame color 'shifting', so set to four row/columns sent/skipped. Signed-off-by: Michael Stegemann <michael@stegemann.it> Signed-off-by: Dale Hamel <dale.hamel@srvthe.net> Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-07-17[media] stk1160: Reduce driver verbosityEzequiel Garcia3-13/+9
These messages are not really informational, and just makes the driver's output too verbose. This commit changes some messages to a debug level, removes a really useless "driver loaded" message and finally undefines the DEBUG macro. Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-07-17[media] media: am437x-vpfe: Requested frame size and fmt overwritten by ↵Benoit Parrot1-1/+1
current sensor setting Upon a S_FMT the input/requested frame size and pixel format is overwritten by the current sub-device settings. Fix this so application can actually set the frame size and format. Fixes: 417d2e507edc ("[media] media: platform: add VPFE capture driver support for AM437X") Cc: <stable@vger.kernel.org> # v4.0+ Signed-off-by: Benoit Parrot <bparrot@ti.com> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-07-17[media] adv7604/cobalt: Allow compile test if !GPIOLIBGeert Uytterhoeven2-2/+4
The GPIO subsystem provides dummy GPIO consumer functions if GPIOLIB is not enabled. Hence drivers that depend on GPIOLIB, but use GPIO consumer functionality only, can still be compiled if GPIOLIB is not enabled. Relax the dependency of VIDEO_ADV7604 and VIDEO_COBALT (the latter selects the former) on GPIOLIB if COMPILE_TEST is enabled. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-07-17[media] DocBook media: fix typo in V4L2_CTRL_FLAG_EXECUTE_ON_WRITEHans Verkuil1-1/+1
Fix small typo (missing 'it') in the documentation for V4L2_CTRL_FLAG_EXECUTE_ON_WRITE. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-07-17[media] DocBook: fix media-ioc-device-info.xml typeHans Verkuil1-1/+1
The documentation had two media_version entries. The second one was a typo and it should be driver_version instead. Correct this. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-07-17[media] adv7842: Deliver resolution change events to userspaceLars-Peter Clausen1-5/+17
Use the new v4l2_subdev_notify_event() helper function to deliver the resolution change event to userspace via the v4l2 subdev event queue as well as to the bridge driver using the callback notify mechanism. This allows userspace applications to react to changes in resolution. This is useful and often necessary for video pipelines where there is no direct 1-to-1 relationship between the subdevice converter and the video capture device and hence it does not make sense to directly forward the event to the video capture device node. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> [hans.verkuil@cisco.com: fix obvious mistake: v4l2_event_subdev_unsubscribe -> v4l2_ctrl_subdev_subscribe_event] Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-07-17[media] adv7604: Deliver resolution change events to userspaceLars-Peter Clausen1-5/+18
Use the new v4l2_subdev_notify_event() helper function to deliver the resolution change event to userspace via the v4l2 subdev event queue as well as to the bridge driver using the callback notify mechanism. This allows userspace applications to react to changes in resolution. This is useful and often necessary for video pipelines where there is no direct 1-to-1 relationship between the subdevice converter and the video capture device and hence it does not make sense to directly forward the event to the video capture device node. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> [hans.verkuil@cisco.com: fix obvious mistake: v4l2_event_subdev_unsubscribe -> v4l2_ctrl_subdev_subscribe_event] Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-07-17[media] Add helper function for subdev event notificationsLars-Peter Clausen2-0/+22
Add a new helper function called v4l2_subdev_notify_event() which will deliver the specified event to both the v4l2 subdev event queue as well as to the notify callback. The former is typically used by userspace applications to listen to notification events while the later is used by bridge drivers. Combining both into the same function avoids boilerplate code in subdev drivers. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-07-17[media] adv7842: Add support for control event notificationsLars-Peter Clausen1-1/+4
Allow userspace applications to subscribe to control change events. This can e.g. be used to monitor the 5V detect control to be notified when a source is connected or disconnected. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-07-17[media] adv7604: Add support for control event notificationsLars-Peter Clausen1-1/+4
Allow userspace applications to subscribe to control change events. This can e.g. be used to monitor the 5V detect control to be notified when a source is connected or disconnected. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-07-17[media] v4l2-event: v4l2_event_queue: do nothing if vdev == NULLHans Verkuil1-0/+3
If the vdev pointer == NULL, then just return. This makes it easier for subdev drivers to use this function without having to check if the sd->devnode pointer is NULL or not. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-07-17Merge tag 'v4.2-rc2' into patchworkMauro Carvalho Chehab245-1912/+5771
Linux 4.2-rc2 We need to backport changeset 31f02455455d, with fixes a bug at include/linux/compiler.h that breaks sparse. * tag 'v4.2-rc2': (221 commits) Linux 4.2-rc2 Revert "drm/i915: Use crtc_state->active in primary check_plane func" freeing unlinked file indefinitely delayed fix a braino in ovl_d_select_inode() 9p: don't leave a half-initialized inode sitting around tick/broadcast: Prevent NULL pointer dereference selinux: fix mprotect PROT_EXEC regression caused by mm change parisc: Fix some PTE/TLB race conditions and optimize __flush_tlb_range based on timing results stifb: Implement hardware accelerated copyarea nfit: add support for NVDIMM "latch" flag nfit: update block I/O path to use PMEM API tools/testing/nvdimm: add mock acpi_nfit_flush_address entries to nfit_test tools/testing/nvdimm: fix return code for unimplemented commands tools/testing/nvdimm: mock ioremap_wt pmem: add maintainer for include/linux/pmem.h Revert "Input: synaptics - allocate 3 slots to keep stability in image sensors" arm64: entry32: remove pointless register assignment MIPS: O32: Use compat_sys_getsockopt. MIPS: c-r4k: Extend way_string array MIPS: Pistachio: Support CDMM & Fast Debug Channel ...
2015-07-17[media] ttusb-dec: use swap() in swap_bytes()Fabian Frederick1-7/+2
Use kernel.h macro definition. Thanks to Julia Lawall for Coccinelle scripting support. Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-07-12Linux 4.2-rc2Linus Torvalds1-1/+1
2015-07-12Revert "drm/i915: Use crtc_state->active in primary check_plane func"Linus Torvalds1-1/+1
This reverts commit dec4f799d0a4c9edae20512fa60b0a36f3299ca2. Jörg Otte reports a NULL pointder dereference due to this commit, as 'crtc_state' very much can be NULL: crtc_state = state->base.state ? intel_atomic_get_crtc_state(state->base.state, intel_crtc) : NULL; So the change to test 'crtc_state->base.active' cannot possibly be correct as-is. There may be some other minimal fix (like just checking crtc_state for NULL), but I'm just reverting it now for the rc2 release, and people like Daniel Vetter who actually know this code will figure out what the right solution is in the longer term. Reported-and-bisected-by: Jörg Otte <jrg.otte@gmail.com> Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> CC: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-07-12Merge branch 'for-linus' of ↵Linus Torvalds4-6/+10
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull VFS fixes from Al Viro: "Fixes for this cycle regression in overlayfs and a couple of long-standing (== all the way back to 2.6.12, at least) bugs" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: freeing unlinked file indefinitely delayed fix a braino in ovl_d_select_inode() 9p: don't leave a half-initialized inode sitting around
2015-07-12Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds27-123/+214
Pull MIPS fixes from Ralf Baechle: "A fair number of 4.2 fixes also because Markos opened the flood gates. - Patch up the math used calculate the location for the page bitmap. - The FDC (Not what you think, FDC stands for Fast Debug Channel) IRQ around was causing issues on non-Malta platforms, so move the code to a Malta specific location. - A spelling fix replicated through several files. - Fix to the emulation of an R2 instruction for R6 cores. - Fix the JR emulation for R6. - Further patching of mindless 64 bit issues. - Ensure the kernel won't crash on CPUs with L2 caches with >= 8 ways. - Use compat_sys_getsockopt for O32 ABI on 64 bit kernels. - Fix cache flushing for multithreaded cores. - A build fix" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: O32: Use compat_sys_getsockopt. MIPS: c-r4k: Extend way_string array MIPS: Pistachio: Support CDMM & Fast Debug Channel MIPS: Malta: Make GIC FDC IRQ workaround Malta specific MIPS: c-r4k: Fix cache flushing for MT cores Revert "MIPS: Kconfig: Disable SMP/CPS for 64-bit" MIPS: cps-vec: Use macros for various arithmetics and memory operations MIPS: kernel: cps-vec: Replace KSEG0 with CKSEG0 MIPS: kernel: cps-vec: Use ta0-ta3 pseudo-registers for 64-bit MIPS: kernel: cps-vec: Replace mips32r2 ISA level with mips64r2 MIPS: kernel: cps-vec: Replace 'la' macro with PTR_LA MIPS: kernel: smp-cps: Fix 64-bit compatibility errors due to pointer casting MIPS: Fix erroneous JR emulation for MIPS R6 MIPS: Fix branch emulation for BLTC and BGEC instructions MIPS: kernel: traps: Fix broken indentation MIPS: bootmem: Don't use memory holes for page bitmap MIPS: O32: Do not handle require 32 bytes from the stack to be readable. MIPS, CPUFREQ: Fix spelling of Institute. MIPS: Lemote 2F: Fix build caused by recent mass rename.
2015-07-12Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds13-91/+116
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: - the high latency PIT detection fix, which slipped through the cracks for rc1 - a regression fix for the early printk mechanism - the x86 part to plug irq/vector related hotplug races - move the allocation of the espfix pages on cpu hotplug to non atomic context. The current code triggers a might_sleep() warning. - a series of KASAN fixes addressing boot crashes and usability - a trivial typo fix for Kconfig help text * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/kconfig: Fix typo in the CONFIG_CMDLINE_BOOL help text x86/irq: Retrieve irq data after locking irq_desc x86/irq: Use proper locking in check_irq_vectors_for_cpu_disable() x86/irq: Plug irq vector hotplug race x86/earlyprintk: Allow early_printk() to use console style parameters like '115200n8' x86/espfix: Init espfix on the boot CPU side x86/espfix: Add 'cpu' parameter to init_espfix_ap() x86/kasan: Move KASAN_SHADOW_OFFSET to the arch Kconfig x86/kasan: Add message about KASAN being initialized x86/kasan: Fix boot crash on AMD processors x86/kasan: Flush TLBs after switching CR3 x86/kasan: Fix KASAN shadow region page tables x86/init: Clear 'init_level4_pgt' earlier x86/tsc: Let high latency PIT fail fast in quick_pit_calibrate()
2015-07-12Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds8-74/+155
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fixes from Thomas Gleixner: "This update from the timer departement contains: - A series of patches which address a shortcoming in the tick broadcast code. If the broadcast device is not available or an hrtimer emulated broadcast device, some of the original assumptions lead to boot failures. I rather plugged all of the corner cases instead of only addressing the issue reported, so the change got a little larger. Has been extensivly tested on x86 and arm. - Get rid of the last holdouts using do_posix_clock_monotonic_gettime() - A regression fix for the imx clocksource driver - An update to the new state callbacks mechanism for clockevents. This is required to simplify the conversion, which will take place in 4.3" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tick/broadcast: Prevent NULL pointer dereference time: Get rid of do_posix_clock_monotonic_gettime cris: Replace do_posix_clock_monotonic_gettime() tick/broadcast: Unbreak CONFIG_GENERIC_CLOCKEVENTS=n build tick/broadcast: Handle spurious interrupts gracefully tick/broadcast: Check for hrtimer broadcast active early tick/broadcast: Return busy when IPI is pending tick/broadcast: Return busy if periodic mode and hrtimer broadcast tick/broadcast: Move the check for periodic mode inside state handling tick/broadcast: Prevent deep idle if no broadcast device available tick/broadcast: Make idle check independent from mode and config tick/broadcast: Sanity check the shutdown of the local clock_event tick/broadcast: Prevent hrtimer recursion clockevents: Allow set-state callbacks to be optional clocksource/imx: Define clocksource for mx27
2015-07-12Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds3-6/+27
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fix from Thomas Gleixner: "A single fix for a cpu hotplug race vs. interrupt descriptors: Prevent irq setup/teardown across the cpu starting/dying parts of cpu hotplug so that the starting/dying cpu has a stable view of the descriptor space. This has been an issue for all architectures in the cpu dying phase, where interrupts are migrated away from the dying cpu. In the starting phase its mostly a x86 issue vs the vector space update" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: hotplug: Prevent alloc/free of irq descriptors during cpu up/down
2015-07-12freeing unlinked file indefinitely delayedAl Viro1-2/+5
Normally opening a file, unlinking it and then closing will have the inode freed upon close() (provided that it's not otherwise busy and has no remaining links, of course). However, there's one case where that does *not* happen. Namely, if you open it by fhandle with cold dcache, then unlink() and close(). In normal case you get d_delete() in unlink(2) notice that dentry is busy and unhash it; on the final dput() it will be forcibly evicted from dcache, triggering iput() and inode removal. In this case, though, we end up with *two* dentries - disconnected (created by open-by-fhandle) and regular one (used by unlink()). The latter will have its reference to inode dropped just fine, but the former will not - it's considered hashed (it is on the ->s_anon list), so it will stay around until the memory pressure will finally do it in. As the result, we have the final iput() delayed indefinitely. It's trivial to reproduce - void flush_dcache(void) { system("mount -o remount,rw /"); } static char buf[20 * 1024 * 1024]; main() { int fd; union { struct file_handle f; char buf[MAX_HANDLE_SZ]; } x; int m; x.f.handle_bytes = sizeof(x); chdir("/root"); mkdir("foo", 0700); fd = open("foo/bar", O_CREAT | O_RDWR, 0600); close(fd); name_to_handle_at(AT_FDCWD, "foo/bar", &x.f, &m, 0); flush_dcache(); fd = open_by_handle_at(AT_FDCWD, &x.f, O_RDWR); unlink("foo/bar"); write(fd, buf, sizeof(buf)); system("df ."); /* 20Mb eaten */ close(fd); system("df ."); /* should've freed those 20Mb */ flush_dcache(); system("df ."); /* should be the same as #2 */ } will spit out something like Filesystem 1K-blocks Used Available Use% Mounted on /dev/root 322023 303843 1131 100% / Filesystem 1K-blocks Used Available Use% Mounted on /dev/root 322023 303843 1131 100% / Filesystem 1K-blocks Used Available Use% Mounted on /dev/root 322023 283282 21692 93% / - inode gets freed only when dentry is finally evicted (here we trigger than by remount; normally it would've happened in response to memory pressure hell knows when). Cc: stable@vger.kernel.org # v2.6.38+; earlier ones need s/kill_it/unhash_it/ Acked-by: J. Bruce Fields <bfields@fieldses.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-07-12fix a braino in ovl_d_select_inode()Al Viro1-0/+3
when opening a directory we want the overlayfs inode, not one from the topmost layer. Reported-By: Andrey Jr. Melnikov <temnota.am@gmail.com> Tested-By: Andrey Jr. Melnikov <temnota.am@gmail.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-07-129p: don't leave a half-initialized inode sitting aroundAl Viro2-4/+2
Cc: stable@vger.kernel.org # all branches Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-07-11Merge branch 'libnvdimm-fixes' of ↵Linus Torvalds8-27/+223
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/nvdimm Pull libnvdimm fixes from Dan Williams: "1) Fixes for a handful of smatch reports (Thanks Dan C.!) and minor bug fixes (patches 1-6) 2) Correctness fixes to the BLK-mode nvdimm driver (patches 7-10). Granted these are slightly large for a -rc update. They have been out for review in one form or another since the end of May and were deferred from the merge window while we settled on the "PMEM API" for the PMEM-mode nvdimm driver (ie memremap_pmem, memcpy_to_pmem, and wmb_pmem). Now that those apis are merged we implement them in the BLK driver to guarantee that mmio aperture moves stay ordered with respect to incoming read/write requests, and that writes are flushed through those mmio-windows and platform-buffers to be persistent on media. These pass the sub-system unit tests with the updates to tools/testing/nvdimm, and have received a successful build-report from the kbuild robot (468 configs). With acks from Rafael for the touches to drivers/acpi/" * 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/nvdimm: nfit: add support for NVDIMM "latch" flag nfit: update block I/O path to use PMEM API tools/testing/nvdimm: add mock acpi_nfit_flush_address entries to nfit_test tools/testing/nvdimm: fix return code for unimplemented commands tools/testing/nvdimm: mock ioremap_wt pmem: add maintainer for include/linux/pmem.h nfit: fix smatch "use after null check" report nvdimm: Fix return value of nvdimm_bus_init() if class_create() fails libnvdimm: smatch cleanups in __nd_ioctl sparse: fix misplaced __pmem definition
2015-07-11Merge branch 'i2c/for-current' of ↵Linus Torvalds4-8/+25
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "Mostly slight adjusments for new drivers, but also one core fix for which finally the dependencies are now available as well" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: Mark instantiated device nodes with OF_POPULATE i2c: jz4780: Fix return value if probe fails i2c: xgene-slimpro: Fix missing mbox_free_channel call in probe error path i2c: I2C_MT65XX should depend on HAS_DMA
2015-07-11Merge branch 'for-linus' of ↵Linus Torvalds2-8/+6
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: "A fix (revert) for a recent regression in Synaptics driver and a fix for Elan i2c touchpad driver" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Revert "Input: synaptics - allocate 3 slots to keep stability in image sensors" Input: elan_i2c - change the hover event from MT to ST

Privacy Policy