path: root/Documentation/RCU
diff options
authorPaul E. McKenney <paulmck@linux.vnet.ibm.com>2013-03-06 13:37:09 -0800
committerPaul E. McKenney <paulmck@linux.vnet.ibm.com>2013-03-13 14:43:56 -0700
commit6231069bdab575fce862ca786f1c0ba5e4e9ba3b (patch)
tree95c88dfa505c5ae3b27df9bcffb07edf3dae511f /Documentation/RCU
parent49d0de082c31de34cc896c14eec5f1c2ade0415a (diff)
rcu: Add softirq-stall indications to stall-warning messages
If RCU's softirq handler is prevented from executing, an RCU CPU stall warning can result. Ways to prevent RCU's softirq handler from executing include: (1) CPU spinning with interrupts disabled, (2) infinite loop in some softirq handler, and (3) in -rt kernels, an infinite loop in a set of real-time threads running at priorities higher than that of RCU's softirq handler. Because this situation can be difficult to track down, this commit causes the count of RCU softirq handler invocations to be printed with RCU CPU stall warnings. This information does require some interpretation, as now documented in Documentation/RCU/stallwarn.txt. Reported-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Tested-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Diffstat (limited to 'Documentation/RCU')
1 files changed, 24 insertions, 9 deletions
diff --git a/Documentation/RCU/stallwarn.txt b/Documentation/RCU/stallwarn.txt
index 1927151b386b..e38b8df3d727 100644
--- a/Documentation/RCU/stallwarn.txt
+++ b/Documentation/RCU/stallwarn.txt
@@ -92,14 +92,14 @@ If the CONFIG_RCU_CPU_STALL_INFO kernel configuration parameter is set,
more information is printed with the stall-warning message, for example:
INFO: rcu_preempt detected stall on CPU
- 0: (63959 ticks this GP) idle=241/3fffffffffffffff/0
+ 0: (63959 ticks this GP) idle=241/3fffffffffffffff/0 softirq=82/543
(t=65000 jiffies)
In kernels with CONFIG_RCU_FAST_NO_HZ, even more information is
INFO: rcu_preempt detected stall on CPU
- 0: (64628 ticks this GP) idle=dd5/3fffffffffffffff/0 drain=0 . timer not pending
+ 0: (64628 ticks this GP) idle=dd5/3fffffffffffffff/0 softirq=82/543 last_accelerate: a345/d342 nonlazy_posted: 25 .D
(t=65000 jiffies)
The "(64628 ticks this GP)" indicates that this CPU has taken more
@@ -116,13 +116,28 @@ number between the two "/"s is the value of the nesting, which will
be a small positive number if in the idle loop and a very large positive
number (as shown above) otherwise.
-For CONFIG_RCU_FAST_NO_HZ kernels, the "drain=0" indicates that the CPU is
-not in the process of trying to force itself into dyntick-idle state, the
-"." indicates that the CPU has not given up forcing RCU into dyntick-idle
-mode (it would be "H" otherwise), and the "timer not pending" indicates
-that the CPU has not recently forced RCU into dyntick-idle mode (it
-would otherwise indicate the number of microseconds remaining in this
-forced state).
+The "softirq=" portion of the message tracks the number of RCU softirq
+handlers that the stalled CPU has executed. The number before the "/"
+is the number that had executed since boot at the time that this CPU
+last noted the beginning of a grace period, which might be the current
+(stalled) grace period, or it might be some earlier grace period (for
+example, if the CPU might have been in dyntick-idle mode for an extended
+time period. The number after the "/" is the number that have executed
+since boot until the current time. If this latter number stays constant
+across repeated stall-warning messages, it is possible that RCU's softirq
+handlers are no longer able to execute on this CPU. This can happen if
+the stalled CPU is spinning with interrupts are disabled, or, in -rt
+kernels, if a high-priority process is starving RCU's softirq handler.
+For CONFIG_RCU_FAST_NO_HZ kernels, the "last_accelerate:" prints the
+low-order 16 bits (in hex) of the jiffies counter when this CPU last
+invoked rcu_try_advance_all_cbs() from rcu_needs_cpu() or last invoked
+rcu_accelerate_cbs() from rcu_prepare_for_idle(). The "nonlazy_posted:"
+prints the number of non-lazy callbacks posted since the last call to
+rcu_needs_cpu(). Finally, an "L" indicates that there are currently
+no non-lazy callbacks ("." is printed otherwise, as shown above) and
+"D" indicates that dyntick-idle processing is enabled ("." is printed
+otherwise, for example, if disabled via the "nohz=" kernel boot parameter).
Multiple Warnings From One Stall

Privacy Policy