path: root/Documentation/w1
diff options
authorEvgeniy Polyakov <johnpol@2ka.mipt.ru>2005-12-06 10:38:28 (GMT)
committerGreg Kroah-Hartman <gregkh@suse.de>2006-03-24 01:28:12 (GMT)
commitbaf12ae29ab4cc6381e21b2e1a3af75a6a8f7566 (patch)
tree43658918e7221e94e40a62de48f04b2b23d75b3a /Documentation/w1
parentbd529cfb40c427d5b5aae0d315afb9f0a1da5e76 (diff)
[PATCH] W1: Add the DS2482 I2C-to-w1 bridge driver.
Signed-off-by: Ben Gardner <bgardner@wabtec.com> Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Diffstat (limited to 'Documentation/w1')
1 files changed, 31 insertions, 0 deletions
diff --git a/Documentation/w1/masters/ds2482 b/Documentation/w1/masters/ds2482
new file mode 100644
index 0000000..c5d5478
--- /dev/null
+++ b/Documentation/w1/masters/ds2482
@@ -0,0 +1,31 @@
+Kernel driver ds2482
+Supported chips:
+ * Maxim DS2482-100, Maxim DS2482-800
+ Prefix: 'ds2482'
+ Addresses scanned: None
+ Datasheets:
+ http://pdfserv.maxim-ic.com/en/ds/DS2482-100-DS2482S-100.pdf
+ http://pdfserv.maxim-ic.com/en/ds/DS2482-800-DS2482S-800.pdf
+Author: Ben Gardner <bgardner@wabtec.com>
+The Maixm/Dallas Semiconductor DS2482 is a I2C device that provides
+one (DS2482-100) or eight (DS2482-800) 1-wire busses.
+General Remarks
+Valid addresses are 0x18, 0x19, 0x1a, and 0x1b.
+However, the device cannot be detected without writing to the i2c bus, so no
+detection is done.
+You should force the device address.
+$ modprobe ds2482 force=0,0x18

Privacy Policy