aboutsummaryrefslogtreecommitdiffstats
path: root/tools
diff options
context:
space:
mode:
authorRusty Russell <rusty@rustcorp.com.au>2015-02-11 04:51:01 (GMT)
committerRusty Russell <rusty@rustcorp.com.au>2015-02-11 06:17:42 (GMT)
commitd9028eda7b381e57246a53bf9bffc04a4a2920b5 (patch)
treef0d3c89368e104d09402b30512eab1009209620d /tools
parente68ccd1f9d3d0fe8085b4e18c2cc2245f384c420 (diff)
lguest: remove support for lguest bus in demonstration launcher.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Diffstat (limited to 'tools')
-rw-r--r--tools/lguest/lguest.c355
1 files changed, 22 insertions, 333 deletions
diff --git a/tools/lguest/lguest.c b/tools/lguest/lguest.c
index 663166a..b5ac735 100644
--- a/tools/lguest/lguest.c
+++ b/tools/lguest/lguest.c
@@ -117,14 +117,6 @@ struct device_list {
/* Counter to print out convenient device numbers. */
unsigned int device_num;
- /* The descriptor page for the devices. */
- u8 *descpage;
-
- /* A single linked list of devices. */
- struct device *dev;
- /* And a pointer to the last device for easy append. */
- struct device *lastdev;
-
/* PCI devices. */
struct device *pci[MAX_PCI_DEVICES];
};
@@ -170,16 +162,6 @@ struct pci_config {
/* The device structure describes a single device. */
struct device {
- /* The linked-list pointer. */
- struct device *next;
-
- /* The device's descriptor, as mapped into the Guest. */
- struct lguest_device_desc *desc;
-
- /* We can't trust desc values once Guest has booted: we use these. */
- unsigned int feature_len;
- unsigned int num_vq;
-
/* The name of this device, for --verbose. */
const char *name;
@@ -216,9 +198,6 @@ struct virtqueue {
/* Which device owns me. */
struct device *dev;
- /* The configuration for this queue. */
- struct lguest_vqconfig config;
-
/* The actual ring of buffers. */
struct vring vring;
@@ -301,13 +280,6 @@ static void iov_consume(struct iovec iov[], unsigned num_iov,
errx(1, "iovec too short!");
}
-/* The device virtqueue descriptors are followed by feature bitmasks. */
-static u8 *get_feature_bits(struct device *dev)
-{
- return (u8 *)(dev->desc + 1)
- + dev->num_vq * sizeof(struct lguest_vqconfig);
-}
-
/*L:100
* The Launcher code itself takes us out into userspace, that scary place where
* pointers run wild and free! Unfortunately, like most userspace programs,
@@ -378,17 +350,6 @@ static void *map_zeroed_pages(unsigned int num)
return addr + getpagesize();
}
-/* Get some more pages for a device. */
-static void *get_pages(unsigned int num)
-{
- void *addr = from_guest_phys(guest_limit);
-
- guest_limit += num * getpagesize();
- if (guest_limit > guest_max)
- errx(1, "Not enough memory for devices");
- return addr;
-}
-
/* Get some bytes which won't be mapped into the guest. */
static unsigned long get_mmio_region(size_t size)
{
@@ -701,7 +662,7 @@ static unsigned next_desc(struct vring_desc *desc,
*/
static void trigger_irq(struct virtqueue *vq)
{
- unsigned long buf[] = { LHREQ_IRQ, vq->config.irq };
+ unsigned long buf[] = { LHREQ_IRQ, vq->dev->config.irq_line };
/* Don't inform them if nothing used. */
if (!vq->pending_used)
@@ -713,13 +674,12 @@ static void trigger_irq(struct virtqueue *vq)
return;
}
- /* For a PCI device, set isr to 1 (queue interrupt pending) */
- if (vq->dev->mmio)
- vq->dev->mmio->isr = 0x1;
+ /* Set isr to 1 (queue interrupt pending) */
+ vq->dev->mmio->isr = 0x1;
/* Send the Guest an interrupt tell them we used something up. */
if (write(lguest_fd, buf, sizeof(buf)) != 0)
- err(1, "Triggering irq %i", vq->config.irq);
+ err(1, "Triggering irq %i", vq->dev->config.irq_line);
}
/*
@@ -1085,21 +1045,18 @@ static void reset_device(struct device *dev)
verbose("Resetting device %s\n", dev->name);
/* Clear any features they've acked. */
- memset(get_feature_bits(dev) + dev->feature_len, 0, dev->feature_len);
+ dev->features_accepted = 0;
/* We're going to be explicitly killing threads, so ignore them. */
signal(SIGCHLD, SIG_IGN);
- /* Zero out the virtqueues, get rid of their threads */
+ /* Get rid of the virtqueue threads */
for (vq = dev->vq; vq; vq = vq->next) {
if (vq->thread != (pid_t)-1) {
kill(vq->thread, SIGTERM);
waitpid(vq->thread, NULL, 0);
vq->thread = (pid_t)-1;
}
- memset(vq->vring.desc, 0,
- vring_size(vq->config.num, LGUEST_VRING_ALIGN));
- lg_last_avail(vq) = 0;
}
dev->running = false;
@@ -1107,122 +1064,27 @@ static void reset_device(struct device *dev)
signal(SIGCHLD, (void *)kill_launcher);
}
-/*L:216
- * This actually creates the thread which services the virtqueue for a device.
- */
-static void create_thread(struct virtqueue *vq)
-{
- /*
- * Create stack for thread. Since the stack grows upwards, we point
- * the stack pointer to the end of this region.
- */
- char *stack = malloc(32768);
- unsigned long args[] = { LHREQ_EVENTFD,
- vq->config.pfn*getpagesize(), 0 };
-
- /* Create a zero-initialized eventfd. */
- vq->eventfd = eventfd(0, 0);
- if (vq->eventfd < 0)
- err(1, "Creating eventfd");
- args[2] = vq->eventfd;
-
- /*
- * Attach an eventfd to this virtqueue: it will go off when the Guest
- * does an LHCALL_NOTIFY for this vq.
- */
- if (write(lguest_fd, &args, sizeof(args)) != 0)
- err(1, "Attaching eventfd");
-
- /*
- * CLONE_VM: because it has to access the Guest memory, and SIGCHLD so
- * we get a signal if it dies.
- */
- vq->thread = clone(do_thread, stack + 32768, CLONE_VM | SIGCHLD, vq);
- if (vq->thread == (pid_t)-1)
- err(1, "Creating clone");
-
- /* We close our local copy now the child has it. */
- close(vq->eventfd);
-}
-
-static void start_device(struct device *dev)
+static void cleanup_devices(void)
{
unsigned int i;
- struct virtqueue *vq;
-
- verbose("Device %s OK: offered", dev->name);
- for (i = 0; i < dev->feature_len; i++)
- verbose(" %02x", get_feature_bits(dev)[i]);
- verbose(", accepted");
- for (i = 0; i < dev->feature_len; i++)
- verbose(" %02x", get_feature_bits(dev)
- [dev->feature_len+i]);
- for (vq = dev->vq; vq; vq = vq->next) {
- if (vq->service)
- create_thread(vq);
+ for (i = 1; i < MAX_PCI_DEVICES; i++) {
+ struct device *d = devices.pci[i];
+ if (!d)
+ continue;
+ reset_device(d);
}
- dev->running = true;
-}
-
-static void cleanup_devices(void)
-{
- struct device *dev;
-
- for (dev = devices.dev; dev; dev = dev->next)
- reset_device(dev);
/* If we saved off the original terminal settings, restore them now. */
if (orig_term.c_lflag & (ISIG|ICANON|ECHO))
tcsetattr(STDIN_FILENO, TCSANOW, &orig_term);
}
-/* When the Guest tells us they updated the status field, we handle it. */
-static void update_device_status(struct device *dev)
-{
- /* A zero status is a reset, otherwise it's a set of flags. */
- if (dev->desc->status == 0)
- reset_device(dev);
- else if (dev->desc->status & VIRTIO_CONFIG_S_FAILED) {
- warnx("Device %s configuration FAILED", dev->name);
- if (dev->running)
- reset_device(dev);
- } else {
- if (dev->running)
- err(1, "Device %s features finalized twice", dev->name);
- start_device(dev);
- }
-}
-
/*L:215
- * This is the generic routine we call when the Guest uses LHCALL_NOTIFY. In
- * particular, it's used to notify us of device status changes during boot.
+ * This is the generic routine we call when the Guest uses LHCALL_NOTIFY.
*/
static void handle_output(unsigned long addr)
{
- struct device *i;
-
- /* Check each device. */
- for (i = devices.dev; i; i = i->next) {
- struct virtqueue *vq;
-
- /*
- * Notifications to device descriptors mean they updated the
- * device status.
- */
- if (from_guest_phys(addr) == i->desc) {
- update_device_status(i);
- return;
- }
-
- /* Devices should not be used before features are finalized. */
- for (vq = i->vq; vq; vq = vq->next) {
- if (addr != vq->config.pfn*getpagesize())
- continue;
- errx(1, "Notification on %s before setup!", i->name);
- }
- }
-
/*
* Early console write is done using notify on a nul-terminated string
* in Guest memory. It's also great for hacking debugging messages
@@ -1736,11 +1598,6 @@ static void enable_virtqueue(struct device *d, struct virtqueue *vq)
err(1, "Creating clone");
}
-static void reset_pci_device(struct device *dev)
-{
- /* FIXME */
-}
-
static void emulate_mmio_write(struct device *d, u32 off, u32 val, u32 mask)
{
struct virtqueue *vq;
@@ -1775,7 +1632,7 @@ static void emulate_mmio_write(struct device *d, u32 off, u32 val, u32 mask)
case offsetof(struct virtio_pci_mmio, cfg.device_status):
verbose("%s: device status -> %#x\n", d->name, val);
if (val == 0)
- reset_pci_device(d);
+ reset_device(d);
goto write_through8;
case offsetof(struct virtio_pci_mmio, cfg.queue_select):
vq = vq_by_num(d, val);
@@ -1986,102 +1843,6 @@ static void emulate_mmio(unsigned long paddr, const u8 *insn)
* device" so the Launcher can keep track of it. We have common helper
* routines to allocate and manage them.
*/
-
-/*
- * The layout of the device page is a "struct lguest_device_desc" followed by a
- * number of virtqueue descriptors, then two sets of feature bits, then an
- * array of configuration bytes. This routine returns the configuration
- * pointer.
- */
-static u8 *device_config(const struct device *dev)
-{
- return (void *)(dev->desc + 1)
- + dev->num_vq * sizeof(struct lguest_vqconfig)
- + dev->feature_len * 2;
-}
-
-/*
- * This routine allocates a new "struct lguest_device_desc" from descriptor
- * table page just above the Guest's normal memory. It returns a pointer to
- * that descriptor.
- */
-static struct lguest_device_desc *new_dev_desc(u16 type)
-{
- struct lguest_device_desc d = { .type = type };
- void *p;
-
- /* Figure out where the next device config is, based on the last one. */
- if (devices.lastdev)
- p = device_config(devices.lastdev)
- + devices.lastdev->desc->config_len;
- else
- p = devices.descpage;
-
- /* We only have one page for all the descriptors. */
- if (p + sizeof(d) > (void *)devices.descpage + getpagesize())
- errx(1, "Too many devices");
-
- /* p might not be aligned, so we memcpy in. */
- return memcpy(p, &d, sizeof(d));
-}
-
-/*
- * Each device descriptor is followed by the description of its virtqueues. We
- * specify how many descriptors the virtqueue is to have.
- */
-static void add_virtqueue(struct device *dev, unsigned int num_descs,
- void (*service)(struct virtqueue *))
-{
- unsigned int pages;
- struct virtqueue **i, *vq = malloc(sizeof(*vq));
- void *p;
-
- /* First we need some memory for this virtqueue. */
- pages = (vring_size(num_descs, LGUEST_VRING_ALIGN) + getpagesize() - 1)
- / getpagesize();
- p = get_pages(pages);
-
- /* Initialize the virtqueue */
- vq->next = NULL;
- vq->last_avail_idx = 0;
- vq->dev = dev;
-
- /*
- * This is the routine the service thread will run, and its Process ID
- * once it's running.
- */
- vq->service = service;
- vq->thread = (pid_t)-1;
-
- /* Initialize the configuration. */
- vq->config.num = num_descs;
- vq->config.irq = devices.next_irq++;
- vq->config.pfn = to_guest_phys(p) / getpagesize();
-
- /* Initialize the vring. */
- vring_init(&vq->vring, num_descs, p, LGUEST_VRING_ALIGN);
-
- /*
- * Append virtqueue to this device's descriptor. We use
- * device_config() to get the end of the device's current virtqueues;
- * we check that we haven't added any config or feature information
- * yet, otherwise we'd be overwriting them.
- */
- assert(dev->desc->config_len == 0 && dev->desc->feature_len == 0);
- memcpy(device_config(dev), &vq->config, sizeof(vq->config));
- dev->num_vq++;
- dev->desc->num_vq++;
-
- verbose("Virtqueue page %#lx\n", to_guest_phys(p));
-
- /*
- * Add to tail of list, so dev->vq is first vq, dev->vq->next is
- * second.
- */
- for (i = &dev->vq; *i; i = &(*i)->next);
- *i = vq;
-}
-
static void add_pci_virtqueue(struct device *dev,
void (*service)(struct virtqueue *))
{
@@ -2107,9 +1868,6 @@ static void add_pci_virtqueue(struct device *dev,
/* Add one to the number of queues */
vq->dev->mmio->cfg.num_queues++;
- /* FIXME: Do irq per virtqueue, not per device. */
- vq->config.irq = vq->dev->config.irq_line;
-
/*
* Add to tail of list, so dev->vq is first vq, dev->vq->next is
* second.
@@ -2118,47 +1876,12 @@ static void add_pci_virtqueue(struct device *dev,
*i = vq;
}
-/*
- * The first half of the feature bitmask is for us to advertise features. The
- * second half is for the Guest to accept features.
- */
-static void add_feature(struct device *dev, unsigned bit)
-{
- u8 *features = get_feature_bits(dev);
-
- /* We can't extend the feature bits once we've added config bytes */
- if (dev->desc->feature_len <= bit / CHAR_BIT) {
- assert(dev->desc->config_len == 0);
- dev->feature_len = dev->desc->feature_len = (bit/CHAR_BIT) + 1;
- }
-
- features[bit / CHAR_BIT] |= (1 << (bit % CHAR_BIT));
-}
-
+/* The Guest accesses the feature bits via the PCI common config MMIO region */
static void add_pci_feature(struct device *dev, unsigned bit)
{
dev->features |= (1ULL << bit);
}
-/*
- * This routine sets the configuration fields for an existing device's
- * descriptor. It only works for the last device, but that's OK because that's
- * how we use it.
- */
-static void set_config(struct device *dev, unsigned len, const void *conf)
-{
- /* Check we haven't overflowed our single page. */
- if (device_config(dev) + len > devices.descpage + getpagesize())
- errx(1, "Too many devices");
-
- /* Copy in the config information, and store the length. */
- memcpy(device_config(dev), conf, len);
- dev->desc->config_len = len;
-
- /* Size must fit in config_len field (8 bits)! */
- assert(dev->desc->config_len == len);
-}
-
/* For devices with no config. */
static void no_device_config(struct device *dev)
{
@@ -2287,59 +2010,28 @@ static void init_pci_config(struct pci_config *pci, u16 type,
}
/*
- * This routine does all the creation and setup of a new device, including
- * calling new_dev_desc() to allocate the descriptor and device memory. We
- * don't actually start the service threads until later.
+ * This routine does all the creation and setup of a new device, but we don't
+ * actually place the MMIO region until we know the size (if any) of the
+ * device-specific config. And we don't actually start the service threads
+ * until later.
*
* See what I mean about userspace being boring?
*/
-static struct device *new_device(const char *name, u16 type)
-{
- struct device *dev = malloc(sizeof(*dev));
-
- /* Now we populate the fields one at a time. */
- dev->desc = new_dev_desc(type);
- dev->name = name;
- dev->vq = NULL;
- dev->feature_len = 0;
- dev->num_vq = 0;
- dev->running = false;
- dev->next = NULL;
-
- /*
- * Append to device list. Prepending to a single-linked list is
- * easier, but the user expects the devices to be arranged on the bus
- * in command-line order. The first network device on the command line
- * is eth0, the first block device /dev/vda, etc.
- */
- if (devices.lastdev)
- devices.lastdev->next = dev;
- else
- devices.dev = dev;
- devices.lastdev = dev;
-
- return dev;
-}
-
static struct device *new_pci_device(const char *name, u16 type,
u8 class, u8 subclass)
{
struct device *dev = malloc(sizeof(*dev));
/* Now we populate the fields one at a time. */
- dev->desc = NULL;
dev->name = name;
dev->vq = NULL;
- dev->feature_len = 0;
- dev->num_vq = 0;
dev->running = false;
- dev->next = NULL;
dev->mmio_size = sizeof(struct virtio_pci_mmio);
dev->mmio = calloc(1, dev->mmio_size);
dev->features = (u64)1 << VIRTIO_F_VERSION_1;
dev->features_accepted = 0;
- if (devices.device_num + 1 >= 32)
+ if (devices.device_num + 1 >= MAX_PCI_DEVICES)
errx(1, "Can only handle 31 PCI devices");
init_pci_config(&dev->config, type, class, subclass);
@@ -2940,11 +2632,9 @@ int main(int argc, char *argv[])
main_args = argv;
/*
- * First we initialize the device list. We keep a pointer to the last
- * device, and the next interrupt number to use for devices (1:
- * remember that 0 is used by the timer).
+ * First we initialize the device list. We remember next interrupt
+ * number to use for devices (1: remember that 0 is used by the timer).
*/
- devices.lastdev = NULL;
devices.next_irq = 1;
/* We're CPU 0. In fact, that's the only CPU possible right now. */
@@ -2969,7 +2659,6 @@ int main(int argc, char *argv[])
+ DEVICE_PAGES);
guest_limit = mem;
guest_max = guest_mmio = mem + DEVICE_PAGES*getpagesize();
- devices.descpage = get_pages(1);
break;
}
}

Privacy Policy