aboutsummaryrefslogtreecommitdiffstats
path: root/tools
AgeCommit message (Collapse)AuthorFilesLines
2015-02-18Merge tag 'virtio-next-for-linus' of ↵Linus Torvalds2-340/+1684
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull virtio updates from Rusty Russell: "OK, this has the big virtio 1.0 implementation, as specified by OASIS. On top of tht is the major rework of lguest, to use PCI and virtio 1.0, to double-check the implementation. Then comes the inevitable fixes and cleanups from that work" * tag 'virtio-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: (80 commits) virtio: don't set VIRTIO_CONFIG_S_DRIVER_OK twice. virtio_net: unconditionally define struct virtio_net_hdr_v1. tools/lguest: don't use legacy definitions for net device in example launcher. virtio: Don't expose legacy net features when VIRTIO_NET_NO_LEGACY defined. tools/lguest: use common error macros in the example launcher. tools/lguest: give virtqueues names for better error messages tools/lguest: more documentation and checking of virtio 1.0 compliance. lguest: don't look in console features to find emerg_wr. tools/lguest: don't start devices until DRIVER_OK status set. tools/lguest: handle indirect partway through chain. tools/lguest: insert driver references from the 1.0 spec (4.1 Virtio Over PCI) tools/lguest: insert device references from the 1.0 spec (4.1 Virtio Over PCI) tools/lguest: rename virtio_pci_cfg_cap field to match spec. tools/lguest: fix features_accepted logic in example launcher. tools/lguest: handle device reset correctly in example launcher. virtual: Documentation: simplify and generalize paravirt_ops.txt lguest: remove NOTIFY call and eventfd facility. lguest: remove NOTIFY facility from demonstration launcher. lguest: use the PCI console device's emerg_wr for early boot messages. lguest: always put console in PCI slot #1. ...
2015-02-15Merge tag 'char-misc-3.20-rc1' of ↵Linus Torvalds3-32/+23
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char / misc patches from Greg KH: "Here's the big char/misc driver update for 3.20-rc1. Lots of little things in here, all described in the changelog. Nothing major or unusual, except maybe the binder selinux stuff, which was all acked by the proper selinux people and they thought it best to come through this tree. All of this has been in linux-next with no reported issues for a while" * tag 'char-misc-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (90 commits) coresight: fix function etm_writel_cp14() parameter order coresight-etm: remove check for unknown Kconfig macro coresight: fixing CPU hwid lookup in device tree coresight: remove the unnecessary function coresight_is_bit_set() coresight: fix the debug AMBA bus name coresight: remove the extra spaces coresight: fix the link between orphan connection and newly added device coresight: remove the unnecessary replicator property coresight: fix the replicator subtype value pdfdocs: Fix 'make pdfdocs' failure for 'uio-howto.tmpl' mcb: Fix error path of mcb_pci_probe virtio/console: verify device has config space ti-st: clean up data types (fix harmless memory corruption) mei: me: release hw from reset only during the reset flow mei: mask interrupt set bit on clean reset bit extcon: max77693: Constify struct regmap_config extcon: adc-jack: Release IIO channel on driver remove extcon: Remove duplicated include from extcon-class.c Drivers: hv: vmbus: hv_process_timer_expiration() can be static Drivers: hv: vmbus: serialize Offer and Rescind offer ...
2015-02-15Merge tag 'usb-3.20-rc1' of ↵Linus Torvalds3-13/+20
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB patches from Greg KH: "Here's the big pull request for the USB driver tree for 3.20-rc1. Nothing major happening here, just lots of gadget driver updates, new device ids, and a bunch of cleanups. All of these have been in linux-next for a while with no reported issues" * tag 'usb-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (299 commits) usb: musb: fix device hotplug behind hub usb: dwc2: Fix a bug in reading the endpoint directions from reg. staging: emxx_udc: fix the build error usb: Retry port status check on resume to work around RH bugs Revert "usb: Reset USB-3 devices on USB-3 link bounce" uhci-hub: use HUB_CHAR_* usb: kconfig: replace PPC_OF with PPC ehci-pci: disable for Intel MID platforms (update) usb: gadget: Kconfig: use bool instead of boolean usb: musb: blackfin: remove incorrect __exit_p() USB: fix use-after-free bug in usb_hcd_unlink_urb() ehci-pci: disable for Intel MID platforms usb: host: pci_quirks: joing string literals USB: add flag for HCDs that can't receive wakeup requests (isp1760-hcd) USB: usbfs: allow URBs to be reaped after disconnection cdc-acm: kill unnecessary messages cdc-acm: add sanity checks usb: phy: phy-generic: Fix USB PHY gpio reset usb: dwc2: fix USB core dependencies usb: renesas_usbhs: fix NULL pointer dereference in dma_release_channel() ...
2015-02-13Merge tag 'pm+acpi-3.20-rc1-2' of ↵Linus Torvalds2-158/+254
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more ACPI and power management updates from Rafael Wysocki: "These are two reverts related to system suspend breakage by one of a recent commits, a fix for a recently introduced bug in devfreq and a bunch of other things that didn't make it into my previous pull request, but otherwise are ready to go. Specifics: - Revert two ACPI EC driver commits, one that broke system suspend on Acer Aspire S5 and one that depends on it (Rafael J Wysocki). - Fix a typo leading to an incorrect check in the exynos-ppmu devfreq driver (Dan Carpenter). - Add support for one more Broadwell CPU model to intel_idle (Len Brown). - Fix an obscure problem with state transitions related to interrupts in the speedstep-smi cpufreq driver (Mikulas Patocka). - Remove some unnecessary messages related to the "out of memory" condition from the core PM code (Quentin Lambert). - Update turbostat parameters and documentation, add support for one more Broadwell CPU model to it and modify it to skip printing disabled package C-states (Len Brown)" * tag 'pm+acpi-3.20-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM / devfreq: event: testing the wrong variable cpufreq: speedstep-smi: enable interrupts when waiting PM / OPP / clk: Remove unnecessary OOM message Revert "ACPI / EC: Add query flushing support" Revert "ACPI / EC: Add GPE reference counting debugging messages" tools/power turbostat: support additional Broadwell model intel_idle: support additional Broadwell model tools/power turbostat: update parameters, documentation tools/power turbostat: Skip printing disabled package C-states
2015-02-13Merge branches 'pm-cpufreq', 'pm-cpuidle', 'pm-devfreq', 'pm-opp' and 'pm-tools'Rafael J. Wysocki2-158/+254
* pm-cpufreq: cpufreq: speedstep-smi: enable interrupts when waiting * pm-cpuidle: intel_idle: support additional Broadwell model * pm-devfreq: PM / devfreq: event: testing the wrong variable * pm-opp: PM / OPP / clk: Remove unnecessary OOM message * pm-tools: tools/power turbostat: support additional Broadwell model tools/power turbostat: update parameters, documentation tools/power turbostat: Skip printing disabled package C-states
2015-02-13tools/lguest: don't use legacy definitions for net device in example launcher.Rusty Russell1-1/+2
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-13tools/lguest: use common error macros in the example launcher.Rusty Russell1-101/+105
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-13tools/lguest: give virtqueues names for better error messagesRusty Russell1-7/+12
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-13tools/lguest: more documentation and checking of virtio 1.0 compliance.Rusty Russell1-14/+293
This is from all the non-PCI parts of the spec. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-13tools/lguest: don't start devices until DRIVER_OK status set.Rusty Russell1-8/+36
We were activating them with the virtqueues, and that's not allowed. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-13tools/lguest: handle indirect partway through chain.Rusty Russell1-12/+13
Linux doesn't generate these, but it's perfectly valid according to a close reading of the spec. I opened virtio spec bug VIRTIO-134 to make this clearer there, too. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-13tools/lguest: insert driver references from the 1.0 spec (4.1 Virtio Over PCI)Rusty Russell1-2/+57
As a demonstration, the lguest launcher is pretty strict, trying to catch badly behaved drivers. Document this precisely. A good implementation would *NOT* crash the guest when these happened! Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-13tools/lguest: insert device references from the 1.0 spec (4.1 Virtio Over PCI)Rusty Russell1-9/+131
There are some (optional) parts we don't implement, but this quotes all the device requirements from the spec (csd 03, but it should be the same across all released versions). Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-13tools/lguest: rename virtio_pci_cfg_cap field to match spec.Rusty Russell1-8/+9
The next patch will insert many quotes from the virtio 1.0 spec; they make most sense if we copy the spec. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-13tools/lguest: fix features_accepted logic in example launcher.Rusty Russell1-1/+1
We were clearing the lower bits when setting the upper bits. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-13tools/lguest: handle device reset correctly in example launcher.Rusty Russell1-2/+18
The example launcher doesn't reset the queue_enable like the spec says we have to. Plus, we should reset the size in case they negotiated a different (smaller) one. This is easy to test by unloading and reloading a virtio module. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-12Merge tag 'ktest-v3.20' of ↵Linus Torvalds1-30/+229
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest Pull ktest updates from Steven Rostedt: "The following ktest updates were done: o Added timings to various parts of the test (build, install, boot, tests) and report them so that the users can keep track of changes. o Josh Poimboeuf fixed the console output to work better with virtual machine targets. o Various clean ups and fixes" * tag 'ktest-v3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest: ktest: Place quotes around item variable ktest: Cleanup terminal on dodie() failure ktest: Print build,install,boot,test times at success and failure ktest: Enable user input to the console ktest: Give console process a dedicated tty ktest: Rename start_monitor_and_boot to start_monitor_and_install ktest: Show times for build, install, boot and test ktest: Restore tty settings after closing console ktest: Add timings for commands
2015-02-12Merge branch 'akpm' (patches from Andrew)Linus Torvalds1-0/+1
Merge second set of updates from Andrew Morton: "More of MM" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (83 commits) mm/nommu.c: fix arithmetic overflow in __vm_enough_memory() mm/mmap.c: fix arithmetic overflow in __vm_enough_memory() vmstat: Reduce time interval to stat update on idle cpu mm/page_owner.c: remove unnecessary stack_trace field Documentation/filesystems/proc.txt: describe /proc/<pid>/map_files mm: incorporate read-only pages into transparent huge pages vmstat: do not use deferrable delayed work for vmstat_update mm: more aggressive page stealing for UNMOVABLE allocations mm: always steal split buddies in fallback allocations mm: when stealing freepages, also take pages created by splitting buddy page mincore: apply page table walker on do_mincore() mm: /proc/pid/clear_refs: avoid split_huge_page() mm: pagewalk: fix misbehavior of walk_page_range for vma(VM_PFNMAP) mempolicy: apply page table walker on queue_pages_range() arch/powerpc/mm/subpage-prot.c: use walk->vma and walk_page_vma() memcg: cleanup preparation for page table walk numa_maps: remove numa_maps->vma numa_maps: fix typo in gather_hugetbl_stats pagemap: use walk->vma instead of calling find_vma() clear_refs: remove clear_refs_private->vma and introduce clear_refs_test_walk() ...
2015-02-12Merge tag 'powerpc-3.20-1' of ↵Linus Torvalds14-4/+393
git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux Pull powerpc updates from Michael Ellerman: - Update of all defconfigs - Addition of a bunch of config options to modernise our defconfigs - Some PS3 updates from Geoff - Optimised memcmp for 64 bit from Anton - Fix for kprobes that allows 'perf probe' to work from Naveen - Several cxl updates from Ian & Ryan - Expanded support for the '24x7' PMU from Cody & Sukadev - Freescale updates from Scott: "Highlights include 8xx optimizations, some more work on datapath device tree content, e300 machine check support, t1040 corenet error reporting, and various cleanups and fixes" * tag 'powerpc-3.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: (102 commits) cxl: Add missing return statement after handling AFU errror cxl: Fail AFU initialisation if an invalid configuration record is found cxl: Export optional AFU configuration record in sysfs powerpc/mm: Warn on flushing tlb page in kernel context powerpc/powernv: Add OPAL soft-poweroff routine powerpc/perf/hv-24x7: Document sysfs event description entries powerpc/perf/hv-gpci: add the remaining gpci requests powerpc/perf/{hv-gpci, hv-common}: generate requests with counters annotated powerpc/perf/hv-24x7: parse catalog and populate sysfs with events perf: define EVENT_DEFINE_RANGE_FORMAT_LITE helper perf: add PMU_EVENT_ATTR_STRING() helper perf: provide sysfs_show for struct perf_pmu_events_attr powerpc/kernel: Avoid initializing device-tree pointer twice powerpc: Remove old compile time disabled syscall tracing code powerpc/kernel: Make syscall_exit a local label cxl: Fix device_node reference counting powerpc/mm: bail out early when flushing TLB page powerpc: defconfigs: add MTD_SPI_NOR (new dependency for M25P80) perf/powerpc: reset event hw state when adding it to the PMU powerpc/qe: Use strlcpy() ...
2015-02-12Merge branch 'turbostat' of ↵Rafael J. Wysocki2-158/+254
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux into pm-tools Pull additional turbostat updates for v3.20 from Len Brown. * 'turbostat' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: tools/power turbostat: support additional Broadwell model tools/power turbostat: update parameters, documentation tools/power turbostat: Skip printing disabled package C-states
2015-02-12mm:add KPF_ZERO_PAGE flag for /proc/kpageflagsWang, Yalin1-0/+1
Add KPF_ZERO_PAGE flag for zero_page, so that userspace processes can detect zero_page in /proc/kpageflags, and then do memory analysis more accurately. Signed-off-by: Yalin Wang <yalin.wang@sonymobile.com> Acked-by: Kirill A. Shutemov <kirill@shutemov.name> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-11lguest: remove NOTIFY facility from demonstration launcher.Rusty Russell1-24/+1
This was only used for early console, now we can get rid of it altogether. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-11lguest: always put console in PCI slot #1.Rusty Russell1-3/+3
This simplifies the early probe. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-11lguest: support backdoor window.Rusty Russell1-1/+100
The VIRTIO_PCI_CAP_PCI_CFG in the PCI virtio 1.0 spec allows access to the BAR registers without mapping them. This is a compulsory feature, and we implement it here. There are some subtleties involving access widths which we should note: 4.1.4.7.1 Device Requirements: PCI configuration access capability ... Upon detecting driver write access to pci_cfg_data, the device MUST execute a write access at offset cap.offset at BAR selected by cap.bar using the first cap.length bytes from pci_cfg_data. Upon detecting driver read access to pci_cfg_data, the device MUST execute a read access of length cap.length at offset cap.offset at BAR selected by cap.bar and store the first cap.length bytes in pci_cfg_data. So, for a write, we copy into the pci_cfg_data window, then write from there out to the BAR. This works correctly if cap.length != width of write. Similarly, for a read, we read into window from the BAR then read the value from there. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-11lguest: support emerg_wr in console device in example launcher.Rusty Russell1-3/+14
This is a magic register which causes a character to be outputted: it can be used even before the device is configured. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-11lguest: remove support for lguest bus in demonstration launcher.Rusty Russell1-333/+22
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-11lguest: define VIRTIO_CONFIG_NO_LEGACY in example launcher.Rusty Russell1-0/+1
We only support virtio 1.0 now Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-11lguest: Convert console device to virtio 1.0 PCI.Rusty Russell1-7/+7
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-11lguest: Convert entropy device to virtio 1.0 PCI.Rusty Russell1-5/+7
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-11lguest: Convert net device to virtio 1.0 PCI.Rusty Russell1-20/+28
The only real change here (other than using the PCI bus) is that we didn't negotiate VIRTIO_NET_F_MRG_RXBUF before, so the format of the packet header changed with virtio 1.0; we need TUNSETVNETHDRSZ on the tun fd to tell it about the extra two bytes. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-11lguest: Convert block device to virtio 1.0 PCI.Rusty Russell1-21/+9
We remove SCSI support (which was removed for 1.0) and VIRTIO_BLK_F_FLUSH feature flag (removed too, since it's compulsory for 1.0). The rest is mainly mechanical. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-11lguest: add a dummy PCI host bridge.Rusty Russell1-0/+14
Otherwise Linux fails to find the bus. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-11lguest: fix failure to find linux/virtio_types.hRusty Russell1-1/+7
We want to use the local kernel headers, but -I../../include/uapi leads us into a world of hurt. Instead we create a dummy include/ dir with symlinks. If we just use #include "../../include/uapi/linux/virtio_blk.h" we get: ../../include/uapi/linux/virtio_blk.h:31:32: fatal error: linux/virtio_types.h: No such file or directory #include <linux/virtio_types.h> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-11lguest: implement virtio-PCI MMIO accesses.Rusty Russell1-2/+490
For each device, We need to include the vendor capabilities to demark where virtio common, notification and ISR regions are (we put them all in BAR0). We need to handle the switching of the virtqueues using the accessors. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-11lguest: add PCI config space emulation to example launcher.Rusty Russell1-5/+211
This handles ioport 0xCF8 and 0xCFC accesses, which are used to read/write PCI device config space. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-11lguest: decode mmio accesses for PCI in example launcher.Rusty Russell1-0/+167
We don't do anything with them yet (emulate_mmio_write and emulate_mmio_read are stubs), but we decode the instructions and search for the device they're hitting. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-11lguest: add MMIO region allocator in example launcher.Rusty Russell1-5/+23
This is where we point our PCI BARs, so that we can intercept MMIO accesses. We tell the kernel about it so any faults in this area are directed to us. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-11lguest: add iomem region, where guest page faults get sent to userspace.Rusty Russell1-1/+2
This lets us implement PCI. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-11lguest: suppress PS/2 keyboard polling.Rusty Russell1-0/+4
While hacking on getting I/O out to the lguest launcher, I noticed that returning 0xFF for the PS/2 keyboard status made it spin for a while thinking there was a key pending. Fix this by returning 1 instead of 0xFF. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-11lguest: send trap 13 through to userspace.Rusty Russell1-0/+149
We copy 7 bytes at eip for userspace's instruction decode; we have to carefully handle the case where eip is at the end of a page. We can't leave this to userspace since kernel has all the page table decode logic. The decode logic moves to userspace, basically unchanged. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-11lguest: write more information to userspace about pending traps.Rusty Russell1-6/+10
This is preparation for userspace handling MMIO and ioport accesses. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-11lguest: have --rng read from /dev/urandom not /dev/random.Rusty Russell1-5/+5
Theoretical debates aside, now it boots. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-10Merge tag 'pm+acpi-3.20-rc1' of ↵Linus Torvalds14-107/+321
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management updates from Rafael Wysocki: "We have a few new features this time, including a new SFI-based cpufreq driver, a new devfreq driver for Tegra Activity Monitor, a new devfreq class for providing its governors with raw utilization data and a new ACPI driver for AMD SoCs. Still, the majority of changes here are reworks of existing code to make it more straightforward or to prepare it for implementing new features on top of it. The primary example is the rework of ACPI resources handling from Jiang Liu, Thomas Gleixner and Lv Zheng with support for IOAPIC hotplug implemented on top of it, but there is quite a number of changes of this kind in the cpufreq core, ACPICA, ACPI EC driver, ACPI processor driver and the generic power domains core code too. The most active developer is Viresh Kumar with his cpufreq changes. Specifics: - Rework of the core ACPI resources parsing code to fix issues in it and make using resource offsets more convenient and consolidation of some resource-handing code in a couple of places that have grown analagous data structures and code to cover the the same gap in the core (Jiang Liu, Thomas Gleixner, Lv Zheng). - ACPI-based IOAPIC hotplug support on top of the resources handling rework (Jiang Liu, Yinghai Lu). - ACPICA update to upstream release 20150204 including an interrupt handling rework that allows drivers to install raw handlers for ACPI GPEs which then become entirely responsible for the given GPE and the ACPICA core code won't touch it (Lv Zheng, David E Box, Octavian Purdila). - ACPI EC driver rework to fix several concurrency issues and other problems related to events handling on top of the ACPICA's new support for raw GPE handlers (Lv Zheng). - New ACPI driver for AMD SoCs analogous to the LPSS (Low-Power Subsystem) driver for Intel chips (Ken Xue). - Two minor fixes of the ACPI LPSS driver (Heikki Krogerus, Jarkko Nikula). - Two new blacklist entries for machines (Samsung 730U3E/740U3E and 510R) where the native backlight interface doesn't work correctly while the ACPI one does (Hans de Goede). - Rework of the ACPI processor driver's handling of idle states to make the code more straightforward and less bloated overall (Rafael J Wysocki). - Assorted minor fixes related to ACPI and SFI (Andreas Ruprecht, Andy Shevchenko, Hanjun Guo, Jan Beulich, Rafael J Wysocki, Yaowei Bai). - PCI core power management modification to avoid resuming (some) runtime-suspended devices during system suspend if they are in the right states already (Rafael J Wysocki). - New SFI-based cpufreq driver for Intel platforms using SFI (Srinidhi Kasagar). - cpufreq core fixes, cleanups and simplifications (Viresh Kumar, Doug Anderson, Wolfram Sang). - SkyLake CPU support and other updates for the intel_pstate driver (Kristen Carlson Accardi, Srinivas Pandruvada). - cpufreq-dt driver cleanup (Markus Elfring). - Init fix for the ARM big.LITTLE cpuidle driver (Sudeep Holla). - Generic power domains core code fixes and cleanups (Ulf Hansson). - Operating Performance Points (OPP) core code cleanups and kernel documentation update (Nishanth Menon). - New dabugfs interface to make the list of PM QoS constraints available to user space (Nishanth Menon). - New devfreq driver for Tegra Activity Monitor (Tomeu Vizoso). - New devfreq class (devfreq_event) to provide raw utilization data to devfreq governors (Chanwoo Choi). - Assorted minor fixes and cleanups related to power management (Andreas Ruprecht, Krzysztof Kozlowski, Rickard Strandqvist, Pavel Machek, Todd E Brandt, Wonhong Kwon). - turbostat updates (Len Brown) and cpupower Makefile improvement (Sriram Raghunathan)" * tag 'pm+acpi-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (151 commits) tools/power turbostat: relax dependency on APERF_MSR tools/power turbostat: relax dependency on invariant TSC Merge branch 'pci/host-generic' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci into acpi-resources tools/power turbostat: decode MSR_*_PERF_LIMIT_REASONS tools/power turbostat: relax dependency on root permission ACPI / video: Add disable_native_backlight quirk for Samsung 510R ACPI / PM: Remove unneeded nested #ifdef USB / PM: Remove unneeded #ifdef and associated dead code intel_pstate: provide option to only use intel_pstate with HWP ACPI / EC: Add GPE reference counting debugging messages ACPI / EC: Add query flushing support ACPI / EC: Refine command storm prevention support ACPI / EC: Add command flushing support. ACPI / EC: Introduce STARTED/STOPPED flags to replace BLOCKED flag ACPI: add AMD ACPI2Platform device support for x86 system ACPI / table: remove duplicate NULL check for the handler of acpi_table_parse() ACPI / EC: Update revision due to raw handler mode. ACPI / EC: Reduce ec_poll() by referencing the last register access timestamp. ACPI / EC: Fix several GPE handling issues by deploying ACPI_GPE_DISPATCH_RAW_HANDLER mode. ACPICA: Events: Enable APIs to allow interrupt/polling adaptive request based GPE handling model ...
2015-02-10tools/power turbostat: support additional Broadwell modelLen Brown1-1/+4
Signed-off-by: Len Brown <len.brown@intel.com>
2015-02-10Merge branch 'pm-tools'Rafael J. Wysocki3-96/+310
* pm-tools: tools/power turbostat: relax dependency on APERF_MSR tools/power turbostat: relax dependency on invariant TSC tools/power turbostat: decode MSR_*_PERF_LIMIT_REASONS tools/power turbostat: relax dependency on root permission cpupower Makefile change to help run the tool without 'make install'
2015-02-10Merge branch 'acpica'Rafael J. Wysocki11-11/+11
* acpica: ACPICA: Events: Enable APIs to allow interrupt/polling adaptive request based GPE handling model ACPICA: Events: Introduce acpi_set_gpe()/acpi_finish_gpe() to reduce divergences ACPICA: Events: Introduce ACPI_GPE_DISPATCH_RAW_HANDLER to fix 2 issues for the current GPE APIs ACPICA: Update version to 20150204 ACPICA: Update Copyright headers to 2015 ACPICA: Hardware: Cast GPE enable_mask before storing ACPICA: Events: Cleanup GPE dispatcher type obtaining code ACPICA: Events: Cleanup to move acpi_gbl_global_event_handler invocation out of acpi_ev_gpe_dispatch() ACPICA: Events: Cleanup of resetting the GPE handler to NULL before removing ACPICA: Events: Fix uninitialized variable ACPICA: Events: Remove acpi_ev_valid_gpe_event() due to current restriction ACPICA: Events: Remove duplicated sanity check in acpi_ev_enable_gpe() ACPICA: Events: Back port "ACPICA: Save current masks of enabled GPEs after enable register writes" ACPICA: Resources: Provide common part for struct acpi_resource_address structures. ACPI: Introduce acpi_unload_parent_table() usages in Linux kernel ACPICA: take ACPI_MTX_INTERPRETER in acpi_unload_table_id()
2015-02-10tools/power turbostat: update parameters, documentationLen Brown2-87/+136
Long format options added, though the short ones should still work. eg. the new "--Counter 0x10" is the same as the old "-C 0x10" Note this Incompatibility: Old: -v displayed verbose debug output New: -v and --version simpaly display version Additional parameters: -d and --debug display verbose debug output -h and --help display a help message Updated turbosat.8 man page accordingly. Signed-off-by: Len Brown <len.brown@intel.com>
2015-02-10tools/power turbostat: Skip printing disabled package C-statesLen Brown1-72/+116
Replaced previously open-coded Package C-state Limit decoding with table-driven decoding. In doing so, updated to match January 2015 "Intel(R) 64 and IA-23 Architectures Software Developer's Manual". In the past, turbostat would print package C-state residency columns for all package states supported by the model's architecture, even though a particular SKU may not support them, or they may be disabled by the BIOS. Now turbostat will skip printing colunns if MSRs indicate that they are not enabled. eg. many SKUs don't support PC7, and so that column will no longer be printed. Signed-off-by: Len Brown <len.brown@intel.com>
2015-02-09Merge branch 'perf-core-for-linus' of ↵Linus Torvalds59-498/+1175
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf updates from Ingo Molnar: "Kernel side changes: - AMD range breakpoints support: Extend breakpoint tools and core to support address range through perf event with initial backend support for AMD extended breakpoints. The syntax is: perf record -e mem:addr/len:type For example set write breakpoint from 0x1000 to 0x1200 (0x1000 + 512) perf record -e mem:0x1000/512:w - event throttling/rotating fixes - various event group handling fixes, cleanups and general paranoia code to be more robust against bugs in the future. - kernel stack overhead fixes User-visible tooling side changes: - Show precise number of samples in at the end of a 'record' session, if processing build ids, since we will then traverse the whole perf.data file and see all the PERF_RECORD_SAMPLE records, otherwise stop showing the previous off-base heuristicly counted number of "samples" (Namhyung Kim). - Support to read compressed module from build-id cache (Namhyung Kim) - Enable sampling loads and stores simultaneously in 'perf mem' (Stephane Eranian) - 'perf diff' output improvements (Namhyung Kim) - Fix error reporting for evsel pgfault constructor (Arnaldo Carvalho de Melo) Tooling side infrastructure changes: - Cache eh/debug frame offset for dwarf unwind (Namhyung Kim) - Support parsing parameterized events (Cody P Schafer) - Add support for IP address formats in libtraceevent (David Ahern) Plus other misc fixes" * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (48 commits) perf: Decouple unthrottling and rotating perf: Drop module reference on event init failure perf: Use POLLIN instead of POLL_IN for perf poll data in flag perf: Fix put_event() ctx lock perf: Fix move_group() order perf: Fix event->ctx locking perf: Add a bit of paranoia perf symbols: Convert lseek + read to pread perf tools: Use perf_data_file__fd() consistently perf symbols: Support to read compressed module from build-id cache perf evsel: Set attr.task bit for a tracking event perf header: Set header version correctly perf record: Show precise number of samples perf tools: Do not use __perf_session__process_events() directly perf callchain: Cache eh/debug frame offset for dwarf unwind perf tools: Provide stub for missing pthread_attr_setaffinity_np perf evsel: Don't rely on malloc working for sz 0 tools lib traceevent: Add support for IP address formats perf ui/tui: Show fatal error message only if exists perf tests: Fix typo in sample-parsing.c ...
2015-02-09Merge branch 'turbostat' of ↵Rafael J. Wysocki2-95/+309
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux into pm-tools Pull turbostate changes for v3.20 from Len Brown. * 'turbostat' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: tools/power turbostat: relax dependency on APERF_MSR tools/power turbostat: relax dependency on invariant TSC tools/power turbostat: decode MSR_*_PERF_LIMIT_REASONS tools/power turbostat: relax dependency on root permission

Privacy Policy