aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorSakari Ailus <sakari.ailus@linux.intel.com>2020-02-11 14:22:51 -0300
committerMauro Carvalho Chehab <mchehab+samsung@kernel.org>2020-02-27 17:49:04 -0300
commit7cbeb2e1bf0c0972d7ff09af1f37e77bfac680ce (patch)
tree84738959fade011ef3174f924f726e023503d755
parent354d5aba6683c41962b591c9b6832a49b160bb46 (diff)
media: smiapp: Move definitions under driver directory
include/media/i2c/smiapp.h was meant to serve systems where the sensor is enumerated through platform data. That's no longer necessary, hopefully not even in out-of-tree use cases. Move the definitions to the appropriate headers. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-rw-r--r--drivers/media/i2c/smiapp/smiapp-reg.h4
-rw-r--r--drivers/media/i2c/smiapp/smiapp.h44
-rw-r--r--include/media/i2c/smiapp.h63
3 files changed, 47 insertions, 64 deletions
diff --git a/drivers/media/i2c/smiapp/smiapp-reg.h b/drivers/media/i2c/smiapp/smiapp-reg.h
index 43505cd0616e..e6f96309786f 100644
--- a/drivers/media/i2c/smiapp/smiapp-reg.h
+++ b/drivers/media/i2c/smiapp/smiapp-reg.h
@@ -35,6 +35,10 @@
#define SMIAPP_FLASH_MODE_CAPABILITY_SINGLE_STROBE BIT(0)
#define SMIAPP_FLASH_MODE_CAPABILITY_MULTIPLE_STROBE BIT(1)
+#define SMIAPP_CSI_SIGNALLING_MODE_CCP2_DATA_CLOCK 0
+#define SMIAPP_CSI_SIGNALLING_MODE_CCP2_DATA_STROBE 1
+#define SMIAPP_CSI_SIGNALLING_MODE_CSI2 2
+
#define SMIAPP_DPHY_CTRL_AUTOMATIC 0
/* DPHY control based on REQUESTED_LINK_BIT_RATE_MBPS */
#define SMIAPP_DPHY_CTRL_UI 1
diff --git a/drivers/media/i2c/smiapp/smiapp.h b/drivers/media/i2c/smiapp/smiapp.h
index 4837d80dc453..6f469934f9e3 100644
--- a/drivers/media/i2c/smiapp/smiapp.h
+++ b/drivers/media/i2c/smiapp/smiapp.h
@@ -14,7 +14,6 @@
#include <linux/mutex.h>
#include <media/v4l2-ctrls.h>
#include <media/v4l2-subdev.h>
-#include <media/i2c/smiapp.h>
#include "smiapp-pll.h"
#include "smiapp-reg.h"
@@ -42,6 +41,49 @@
#define SMIAPP_COLOUR_COMPONENTS 4
+#define SMIAPP_NAME "smiapp"
+
+#define SMIAPP_DFL_I2C_ADDR (0x20 >> 1) /* Default I2C Address */
+#define SMIAPP_ALT_I2C_ADDR (0x6e >> 1) /* Alternate I2C Address */
+
+/*
+ * Sometimes due to board layout considerations the camera module can be
+ * mounted rotated. The typical rotation used is 180 degrees which can be
+ * corrected by giving a default H-FLIP and V-FLIP in the sensor readout.
+ * FIXME: rotation also changes the bayer pattern.
+ */
+enum smiapp_module_board_orient {
+ SMIAPP_MODULE_BOARD_ORIENT_0 = 0,
+ SMIAPP_MODULE_BOARD_ORIENT_180,
+};
+
+struct smiapp_flash_strobe_parms {
+ u8 mode;
+ u32 strobe_width_high_us;
+ u16 strobe_delay;
+ u16 stobe_start_point;
+ u8 trigger;
+};
+
+struct smiapp_hwconfig {
+ /*
+ * Change the cci address if i2c_addr_alt is set.
+ * Both default and alternate cci addr need to be present
+ */
+ unsigned short i2c_addr_dfl; /* Default i2c addr */
+ unsigned short i2c_addr_alt; /* Alternate i2c addr */
+
+ uint32_t ext_clk; /* sensor external clk */
+
+ unsigned int lanes; /* Number of CSI-2 lanes */
+ uint32_t csi_signalling_mode; /* SMIAPP_CSI_SIGNALLING_MODE_* */
+ uint64_t *op_sys_clock;
+
+ enum smiapp_module_board_orient module_board_orient;
+
+ struct smiapp_flash_strobe_parms *strobe_setup;
+};
+
#include "smiapp-limits.h"
struct smiapp_quirk;
diff --git a/include/media/i2c/smiapp.h b/include/media/i2c/smiapp.h
deleted file mode 100644
index 80f8251d87a3..000000000000
--- a/include/media/i2c/smiapp.h
+++ /dev/null
@@ -1,63 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * include/media/i2c/smiapp.h
- *
- * Generic driver for SMIA/SMIA++ compliant camera modules
- *
- * Copyright (C) 2011--2012 Nokia Corporation
- * Contact: Sakari Ailus <sakari.ailus@iki.fi>
- */
-
-#ifndef __SMIAPP_H_
-#define __SMIAPP_H_
-
-#include <media/v4l2-subdev.h>
-
-#define SMIAPP_NAME "smiapp"
-
-#define SMIAPP_DFL_I2C_ADDR (0x20 >> 1) /* Default I2C Address */
-#define SMIAPP_ALT_I2C_ADDR (0x6e >> 1) /* Alternate I2C Address */
-
-#define SMIAPP_CSI_SIGNALLING_MODE_CCP2_DATA_CLOCK 0
-#define SMIAPP_CSI_SIGNALLING_MODE_CCP2_DATA_STROBE 1
-#define SMIAPP_CSI_SIGNALLING_MODE_CSI2 2
-
-/*
- * Sometimes due to board layout considerations the camera module can be
- * mounted rotated. The typical rotation used is 180 degrees which can be
- * corrected by giving a default H-FLIP and V-FLIP in the sensor readout.
- * FIXME: rotation also changes the bayer pattern.
- */
-enum smiapp_module_board_orient {
- SMIAPP_MODULE_BOARD_ORIENT_0 = 0,
- SMIAPP_MODULE_BOARD_ORIENT_180,
-};
-
-struct smiapp_flash_strobe_parms {
- u8 mode;
- u32 strobe_width_high_us;
- u16 strobe_delay;
- u16 stobe_start_point;
- u8 trigger;
-};
-
-struct smiapp_hwconfig {
- /*
- * Change the cci address if i2c_addr_alt is set.
- * Both default and alternate cci addr need to be present
- */
- unsigned short i2c_addr_dfl; /* Default i2c addr */
- unsigned short i2c_addr_alt; /* Alternate i2c addr */
-
- uint32_t ext_clk; /* sensor external clk */
-
- unsigned int lanes; /* Number of CSI-2 lanes */
- uint32_t csi_signalling_mode; /* SMIAPP_CSI_SIGNALLING_MODE_* */
- uint64_t *op_sys_clock;
-
- enum smiapp_module_board_orient module_board_orient;
-
- struct smiapp_flash_strobe_parms *strobe_setup;
-};
-
-#endif /* __SMIAPP_H_ */

Privacy Policy