aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm
AgeCommit message (Collapse)AuthorFilesLines
2021-11-14Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds2-13/+13
Pull ARM fixes from Russell King: - Fix early_iounmap - Drop cc-option fallbacks for architecture selection * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 9156/1: drop cc-option fallbacks for architecture selection ARM: 9155/1: fix early early_iounmap()
2021-11-12ARM: 9156/1: drop cc-option fallbacks for architecture selectionArnd Bergmann1-11/+11
Naresh and Antonio ran into a build failure with latest Debian armhf compilers, with lots of output like tmp/ccY3nOAs.s:2215: Error: selected processor does not support `cpsid i' in ARM mode As it turns out, $(cc-option) fails early here when the FPU is not selected before CPU architecture is selected, as the compiler option check runs before enabling -msoft-float, which causes a problem when testing a target architecture level without an FPU: cc1: error: '-mfloat-abi=hard': selected architecture lacks an FPU Passing e.g. -march=armv6k+fp in place of -march=armv6k would avoid this issue, but the fallback logic is already broken because all supported compilers (gcc-5 and higher) are much more recent than these options, and building with -march=armv5t as a fallback no longer works. The best way forward that I see is to just remove all the checks, which also has the nice side-effect of slightly improving the startup time for 'make'. The -mtune=marvell-f option was apparently never supported by any mainline compiler, and the custom Codesourcery gcc build that did support is now too old to build kernels, so just use -mtune=xscale unconditionally for those. This should be safe to apply on all stable kernels, and will be required in order to keep building them with gcc-11 and higher. Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=996419 Reported-by: Antonio Terceiro <antonio.terceiro@linaro.org> Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Reported-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com> Tested-by: Klaus Kudielka <klaus.kudielka@gmail.com> Cc: Matthias Klose <doko@debian.org> Cc: stable@vger.kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2021-11-12ARM: 9155/1: fix early early_iounmap()Michał Mirosław1-2/+2
Currently __set_fixmap() bails out with a warning when called in early boot from early_iounmap(). Fix it, and while at it, make the comment a bit easier to understand. Cc: <stable@vger.kernel.org> Fixes: b089c31c519c ("ARM: 8667/3: Fix memory attribute inconsistencies when using fixmap") Acked-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2021-11-10Merge tag 'arm64-fixes' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: - Fix double-evaluation of 'pte' macro argument when using 52-bit PAs - Fix signedness of some MTE prctl PR_* constants - Fix kmemleak memory usage by skipping early pgtable allocations - Fix printing of CPU feature register strings - Remove redundant -nostdlib linker flag for vDSO binaries * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: pgtable: make __pte_to_phys/__phys_to_pte_val inline functions arm64: Track no early_pgtable_alloc() for kmemleak arm64: mte: change PR_MTE_TCF_NONE back into an unsigned long arm64: vdso: remove -nostdlib compiler flag arm64: arm64_ftr_reg->name may not be a human-readable string
2021-11-10Merge tag 'asm-generic-5.16' of ↵Linus Torvalds1-10/+0
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic cleanup from Arnd Bergmann: "This is a single cleanup from Peter Collingbourne, removing some dead code" * tag 'asm-generic-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: arch: remove unused function syscall_set_arguments()
2021-11-10Merge tag 'for-linus-5.16b-rc1-tag' of ↵Linus Torvalds2-2/+0
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen updates from Juergen Gross: - a series to speed up the boot of Xen PV guests - some cleanups in Xen related code - replacement of license texts with the appropriate SPDX headers and fixing of wrong SPDX headers in Xen header files - a small series making paravirtualized interrupt masking much simpler and at the same time removing complaints of objtool - a fix for Xen ballooning hogging workqueues for too long - enablement of the Xen pciback driver for Arm - some further small fixes/enhancements * tag 'for-linus-5.16b-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: (22 commits) xen/balloon: fix unused-variable warning xen/balloon: rename alloc/free_xenballooned_pages xen/balloon: add late_initcall_sync() for initial ballooning done x86/xen: remove 32-bit awareness from startup_xen xen: remove highmem remnants xen: allow pv-only hypercalls only with CONFIG_XEN_PV x86/xen: remove 32-bit pv leftovers xen-pciback: allow compiling on other archs than x86 x86/xen: switch initial pvops IRQ functions to dummy ones x86/xen: remove xen_have_vcpu_info_placement flag x86/pvh: add prototype for xen_pvh_init() xen: Fix implicit type conversion xen: fix wrong SPDX headers of Xen related headers xen/pvcalls-back: Remove redundant 'flush_workqueue()' calls x86/xen: Remove redundant irq_enter/exit() invocations xen-pciback: Fix return in pm_ctrl_init() xen/x86: restrict PV Dom0 identity mapping xen/x86: there's no highmem anymore in PV mode xen/x86: adjust handling of the L3 user vsyscall special page table xen/x86: adjust xen_set_fixmap() ...
2021-11-08Merge tag 'kbuild-v5.16' of ↵Linus Torvalds2-4/+3
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - Remove the global -isystem compiler flag, which was made possible by the introduction of <linux/stdarg.h> - Improve the Kconfig help to print the location in the top menu level - Fix "FORCE prerequisite is missing" build warning for sparc - Add new build targets, tarzst-pkg and perf-tarzst-src-pkg, which generate a zstd-compressed tarball - Prevent gen_init_cpio tool from generating a corrupted cpio when KBUILD_BUILD_TIMESTAMP is set to 2106-02-07 or later - Misc cleanups * tag 'kbuild-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (28 commits) kbuild: use more subdir- for visiting subdirectories while cleaning sh: remove meaningless archclean line initramfs: Check timestamp to prevent broken cpio archive kbuild: split DEBUG_CFLAGS out to scripts/Makefile.debug gen_init_cpio: add static const qualifiers kbuild: Add make tarzst-pkg build option scripts: update the comments of kallsyms support sparc: Add missing "FORCE" target when using if_changed kconfig: refactor conf_touch_dep() kconfig: refactor conf_write_dep() kconfig: refactor conf_write_autoconf() kconfig: add conf_get_autoheader_name() kconfig: move sym_escape_string_value() to confdata.c kconfig: refactor listnewconfig code kconfig: refactor conf_write_symbol() kconfig: refactor conf_write_heading() kconfig: remove 'const' from the return type of sym_escape_string_value() kconfig: rename a variable in the lexer to a clearer name kconfig: narrow the scope of variables in the lexer kconfig: Create links to main menu items in search ...
2021-11-08arm64: Track no early_pgtable_alloc() for kmemleakQian Cai1-1/+1
After switched page size from 64KB to 4KB on several arm64 servers here, kmemleak starts to run out of early memory pool due to a huge number of those early_pgtable_alloc() calls: kmemleak_alloc_phys() memblock_alloc_range_nid() memblock_phys_alloc_range() early_pgtable_alloc() init_pmd() alloc_init_pud() __create_pgd_mapping() __map_memblock() paging_init() setup_arch() start_kernel() Increased the default value of DEBUG_KMEMLEAK_MEM_POOL_SIZE by 4 times won't be enough for a server with 200GB+ memory. There isn't much interesting to check memory leaks for those early page tables and those early memory mappings should not reference to other memory. Hence, no kmemleak false positives, and we can safely skip tracking those early allocations from kmemleak like we did in the commit fed84c785270 ("mm/memblock.c: skip kmemleak for kasan_init()") without needing to introduce complications to automatically scale the value depends on the runtime memory size etc. After the patch, the default value of DEBUG_KMEMLEAK_MEM_POOL_SIZE becomes sufficient again. Signed-off-by: Qian Cai <quic_qiancai@quicinc.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Link: https://lore.kernel.org/r/20211105150509.7826-1-quic_qiancai@quicinc.com Signed-off-by: Will Deacon <will@kernel.org>
2021-11-06Merge branch 'akpm' (patches from Andrew)Linus Torvalds2-2/+2
Merge misc updates from Andrew Morton: "257 patches. Subsystems affected by this patch series: scripts, ocfs2, vfs, and mm (slab-generic, slab, slub, kconfig, dax, kasan, debug, pagecache, gup, swap, memcg, pagemap, mprotect, mremap, iomap, tracing, vmalloc, pagealloc, memory-failure, hugetlb, userfaultfd, vmscan, tools, memblock, oom-kill, hugetlbfs, migration, thp, readahead, nommu, ksm, vmstat, madvise, memory-hotplug, rmap, zsmalloc, highmem, zram, cleanups, kfence, and damon)" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (257 commits) mm/damon: remove return value from before_terminate callback mm/damon: fix a few spelling mistakes in comments and a pr_debug message mm/damon: simplify stop mechanism Docs/admin-guide/mm/pagemap: wordsmith page flags descriptions Docs/admin-guide/mm/damon/start: simplify the content Docs/admin-guide/mm/damon/start: fix a wrong link Docs/admin-guide/mm/damon/start: fix wrong example commands mm/damon/dbgfs: add adaptive_targets list check before enable monitor_on mm/damon: remove unnecessary variable initialization Documentation/admin-guide/mm/damon: add a document for DAMON_RECLAIM mm/damon: introduce DAMON-based Reclamation (DAMON_RECLAIM) selftests/damon: support watermarks mm/damon/dbgfs: support watermarks mm/damon/schemes: activate schemes based on a watermarks mechanism tools/selftests/damon: update for regions prioritization of schemes mm/damon/dbgfs: support prioritization weights mm/damon/vaddr,paddr: support pageout prioritization mm/damon/schemes: prioritize regions within the quotas mm/damon/selftests: support schemes quotas mm/damon/dbgfs: support quotas of schemes ...
2021-11-06memblock: rename memblock_free to memblock_phys_freeMike Rapoport2-2/+2
Since memblock_free() operates on a physical range, make its name reflect it and rename it to memblock_phys_free(), so it will be a logical counterpart to memblock_phys_alloc(). The callers are updated with the below semantic patch: @@ expression addr; expression size; @@ - memblock_free(addr, size); + memblock_phys_free(addr, size); Link: https://lkml.kernel.org/r/20210930185031.18648-6-rppt@kernel.org Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Juergen Gross <jgross@suse.com> Cc: Shahab Vahedi <Shahab.Vahedi@synopsys.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-04Merge tag 'usb-5.16-rc1' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB / Thunderbolt updates from Greg KH: "Here is the big set of USB and Thunderbolt driver updates for 5.16-rc1. Nothing major in here, just lots of little cleanups and additions for new hardware, all of which have been in linux-next for a while with no reported problems. Included in here are: - tiny Thunderbolt driver updates - USB typec driver updates - USB serial driver updates - USB gadget driver updates - dwc2 and dwc3 controller driver updates - tiny USB host driver updates - minor USB driver fixes and updates - USB dts updates for various platforms" * tag 'usb-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (123 commits) usb: gadget: Mark USB_FSL_QE broken on 64-bit usb: gadget: f_mass_storage: Disable eps during disconnect usb: gadget: udc: core: Revise comments for USB ep enable/disable USB: serial: keyspan: fix memleak on probe errors USB: serial: cp210x: use usb_control_msg_recv() and usb_control_msg_send() USB: serial: ch314: use usb_control_msg_recv() USB: iowarrior: fix control-message timeouts Documentation: USB: fix example bulk-message timeout usb: dwc2: stm32mp15: set otg_rev usb: dwc2: add otg_rev and otg_caps information for gadget driver dt-bindings: usb: dwc2: adopt otg properties defined in usb-drd.yaml dt-bindings: usb: dwc2: Add reference to usb-drd.yaml usb: gadget: uvc: implement dwPresentationTime and scrSourceClock usb: gadget: uvc: use on returned header len in video_encode_isoc_sg usb:gadget: f_uac1: fixed sync playback Docs: usb: remove :c:func: for usb_register and usb_deregister Docs: usb: update struct usb_driver usb: gadget: configfs: change config attributes file operation usb: gadget: configfs: add cfg_to_gadget_info() helper usb: dwc3: Align DWC3_EP_* flag macros ...
2021-11-03Merge tag 'clk-for-linus' of ↵Linus Torvalds5-4/+5
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "The usual collection of clk driver updates and new driver additions. In terms of lines it's mainly Qualcomm and Mediatek code, supporting various SoCs and their multitude of clk controllers. New Drivers: - GCC and RPMcc support for Qualcomm QCM2290 SoCs - GCC support for Qualcomm MSM8994/MSM8992 SoCs - LPASSCC and CAMCC support for Qualcomm SC7280 SoCs - Support for Mediatek MT8195 SoCs - Initial clock driver for the Exynos850 SoC - Add i.MX8ULP clock driver and related bindings Updates: - Clock power management for new SAMA7G5 SoC - Updates to the master clock driver and sam9x60-pll to be able to use cpufreq-dt driver and avoid overclocking of CPU and MCK0 domains while changing the frequency via DVFS - Use ARRAY_SIZE in qcom clk drivers - Remove some impractical fallback parent names in qcom clk drivers - Make Mediatek clk drivers tristate - Refactoring of the CPU clock code and conversion of Samsung Exynos5433 CPU clock driver to the platform driver - A few conversions to devm_platform_ioremap_resource() - Updates of the Samsung Kconfig help text - Update video path realted clocks for Amlogic meson8 - Add SPI Multi I/O Bus and SDHI clocks and resets on Renesas RZ/G2L - Add SPI Multi I/O Bus (RPC) clocks on Renesas R-Car V3U - Add MediaLB clocks on Renesas R-Car H3, M3-W/W+, and M3-N - Remove unused helpers from i.MX specific clock header - Rework all i.MX clk based helpers to use clk_hw based ones - Rework i.MX gate/mux/divider wrappers - Rework imx_clk_hw_composite and imx_clk_hw_pll14xx wrappers - Update i.MX pllv4 and composite clocks to support i.MX8ULP - Disable i.MX7ULP composite clock during initialization - Add CLK_SET_RATE_NO_REPARENT flag to the i.MX7ULP composite - Disable the i.MX pfd when set pfdv2 clock rate - Add support for i.MX8ULP in pfdv2 - Add the pcc reset controller support on i.MX8ULP - Fix the build break when clk-imx8ulp is built as module - Move csi_sel mux to correct base register in i.MX6UL clock drivr - Fix csi clk gate register in i.MX6UL clock driver - Fix build bug making CLK_IMX8ULP select MXC_CLK - Add TPU (PWM), and Z (Cortex-A76) clocks on Renesas R-Car V3U - Add Ethernet clocks on Renesas RZ/G2L - Move Rockchip to use module_platform_probe - Enable usage of Coresight related clocks on Rockchip rk3399" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (170 commits) clk: use clk_core_get_rate_recalc() in clk_rate_get() clk: at91: sama7g5: set low limit for mck0 at 32KHz clk: at91: sama7g5: remove prescaler part of master clock clk: at91: clk-master: add notifier for divider clk: at91: clk-sam9x60-pll: add notifier for div part of PLL clk: at91: clk-master: fix prescaler logic clk: at91: clk-master: mask mckr against layout->mask clk: at91: clk-master: check if div or pres is zero clk: at91: sam9x60-pll: use DIV_ROUND_CLOSEST_ULL clk: at91: pmc: add sama7g5 to the list of available pmcs clk: at91: clk-master: improve readability by using local variables clk: at91: clk-master: add register definition for sama7g5's master clock clk: at91: sama7g5: add securam's peripheral clock clk: at91: pmc: execute suspend/resume only for backup mode clk: at91: re-factor clocks suspend/resume clk: ux500: Add driver for the reset portions of PRCC dt-bindings: clock: u8500: Rewrite in YAML and extend clk: composite: Use rate_ops.determine_rate when also a mux is available clk: samsung: describe drivers in Kconfig clk: samsung: exynos5433: update apollo and atlas clock probing ...
2021-11-03Merge tag 'defconfig-5.16' of ↵Linus Torvalds5-108/+79
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM defconfig updates from Arnd Bergmann: "These are the usual changes to enable newly added driver by default, and to do some housekeeping around changing Kconfig symbols" * tag 'defconfig-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (33 commits) arm64: defconfig: Enable Qualcomm LMH driver arm64: defconfig: Enable Qualcomm prima/pronto drivers arm64: defconfig: Enable Sleep stats driver arm64: defconfig: Visconti: Enable PCIe host controller ARM: configs: aspeed: Remove unused USB gadget devices ARM: config: aspeed: Enable Network Block Device ARM: configs: aspeed: Enable pstore and lockup detectors ARM: configs: aspeed: Enable commonly used drivers ARM: configs: aspeed: Disable IPV6 SIT device ARM: imx_v6_v7_defconfig: Enable HID I2C arm64: defconfig: Enable QTI SC7280 pinctrl, gcc and interconnect arm64: defconfig: Disable firmware sysfs fallback ARM: mvebu_v7_defconfig: rebuild default configuration ARM: mvebu_v7_defconfig: enable mtd physmap arm64: defconfig: Enable few Tegra210 based AHUB drivers arm64: defconfig: drop obsolete ARCH_* configs ARM: imx_v6_v7_defconfig: enable bpf syscall and cgroup bpf ARM: imx_v6_v7_defconfig: build imx sdma driver as module ARM: imx_v6_v7_defconfig: rebuild default configuration ARM: imx_v6_v7_defconfig: change snd soc tlv320aic3x to i2c variant ...
2021-11-03Merge tag 'drivers-5.16' of ↵Linus Torvalds7-444/+653
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC driver updates from Arnd Bergmann: "These are all the driver updates for SoC specific drivers. There are a couple of subsystems with individual maintainers picking up their patches here: - The reset controller subsystem add support for a few new SoC variants to existing drivers, along with other minor improvements - The OP-TEE subsystem gets a driver for the ARM FF-A transport - The memory controller subsystem has improvements for Tegra, Mediatek, Renesas, Freescale and Broadcom specific drivers. - The tegra cpuidle driver changes get merged through this tree this time. There are only minor changes, but they depend on other tegra driver updates here. - The ep93xx platform finally moves to using the drivers/clk/ subsystem, moving the code out of arch/arm in the process. This depends on a small sound driver change that is included here as well. - There are some minor updates for Qualcomm and Tegra specific firmware drivers. The other driver updates are mainly for drivers/soc, which contains a mixture of vendor specific drivers that don't really fit elsewhere: - Mediatek drivers gain more support for MT8192, with new support for hw-mutex and mmsys routing, plus support for reset lines in the mmsys driver. - Qualcomm gains a new "sleep stats" driver, and support for the "Generic Packet Router" in the APR driver. - There is a new user interface for routing the UARTS on ASpeed BMCs, something that apparently nobody else has needed so far. - More drivers can now be built as loadable modules, in particular for Broadcom and Samsung platforms. - Lots of improvements to the TI sysc driver for better suspend/resume support" Finally, there are lots of minor cleanups and new device IDs for amlogic, renesas, tegra, qualcomm, mediateka, samsung, imx, layerscape, allwinner, broadcom, and omap" * tag 'drivers-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (179 commits) optee: Fix spelling mistake "reclain" -> "reclaim" Revert "firmware: qcom: scm: Add support for MC boot address API" qcom: spm: allow compile-testing firmware: arm_ffa: Remove unused 'compat_version' variable soc: samsung: exynos-chipid: add exynosautov9 SoC support firmware: qcom: scm: Don't break compile test on non-ARM platforms soc: qcom: smp2p: Add of_node_put() before goto soc: qcom: apr: Add of_node_put() before return soc: qcom: qcom_stats: Fix client votes offset soc: qcom: rpmhpd: fix sm8350_mxc's peer domain dt-bindings: arm: cpus: Document qcom,msm8916-smp enable-method ARM: qcom: Add qcom,msm8916-smp enable-method identical to MSM8226 firmware: qcom: scm: Add support for MC boot address API soc: qcom: spm: Add 8916 SPM register data dt-bindings: soc: qcom: spm: Document qcom,msm8916-saw2-v3.0-cpu soc: qcom: socinfo: Add PM8150C and SMB2351 models firmware: qcom_scm: Fix error retval in __qcom_scm_is_call_available() soc: aspeed: Add UART routing support soc: fsl: dpio: rename the enqueue descriptor variable soc: fsl: dpio: use an explicit NULL instead of 0 ...
2021-11-03Merge tag 'dt-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds294-2094/+8709
Pull ARM SoC DT updates from Arnd Bergmann: "This is a rather large update for the ARM devicetree files, after a few quieter releases, with 775 total commits and 47 branches pulled into this one. There are 5 new SoC types plus some minor variations, and a total of 60 new machines, so I'm limiting the summary to the main noteworthy items: - Apple M1 gain support for PCI and pinctrl, getting a bit closer to a usable system out of the box. - Qualcomm gains support for Snapdragon 690 (aka SM6350) as well as SM7225, 11 new smartphones, and three additional Chromebooks, and improvements all over the place. - Samsung gains support for ExynosAutov9, an automotive version of their smartphone SoC, but otherwise no major changes. - Microchip adds the SAMA5D29 SoC in the SAMA5 family, and a number of improvements for the recently added SAMA7 family. The LAN966 SoC that was added in the platform code does not have dts files yet. Two board files are added for the older at91sam9g20 SoC - Aspeed supports two additional server boards using their AST2600 as BMC, and improves support for qemu models - Rockchip RK3566/RK3688 gets added, along with six new development boards using RK3328/RK3399/RK3566, and one Chromebook tablet. - Two NAS boxes are added using the ARMv4 based Gemini platform - One new board is added to the Intel Arria SoC FPGA family - Marvell adds one network switch based on Armada 381 and the new MOCHAbin 7040 development board - NXP adds support for the S32G2 automotive SoC, two imx6 based ebook readers, and three additional development boards, which is notably less than their usual additions, but they also gain improvements to their many existing boards - STmicroelectronics adds their stm32mp13 SoC family along with a reference board - Renesas adds new versions of their R-Car Gen3 SoCs and many updates for their older generations - Broadcom adds support for a number of Cisco Meraki wireless controllers, along with two new boards and other updates for BCM53xx/BCM47xx networking SoCs and the Raspberry Pi boards - Mediatek improves support for the MT81xx SoCs used in Chromebooks as well as the MT76xx networking SoCs - NVIDIA adds a number of cleanups and additional support for more hardware on the already supported machines - TI K3 adds support for three new boards along with cleanups - Toshiba adds one board for the Visconti family - Xilinx adds five new ZynqMP based machines - Amlogic support is added for the Radxa Zero and two Jethub home automation controllers, along with changes to other machines - Rob Herring continues his work on fixing dtc warnings all over the tree. - Minor updates for TI OMAP, Mstar, Allwinner/sunxi, Hisilicon, Ux500, Unisoc" * tag 'dt-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (720 commits) arm64: dts: apple: j274: Expose PCI node for the Ethernet MAC address arm64: dts: apple: t8103: Add root port interrupt routing arm64: dts: apple: t8103: Add PCIe DARTs arm64: apple: Add PCIe node arm64: apple: Add pinctrl nodes ARM: dts: arm: Update ICST clock nodes 'reg' and node names ARM: dts: arm: Update register-bit-led nodes 'reg' and node names arm64: dts: exynos: add chipid node for exynosautov9 SoC ARM: dts: qcom: fix typo in IPQ8064 thermal-sensor node Revert "arm64: dts: qcom: msm8916-asus-z00l: Add sensors" arm64: dts: qcom: ipq6018: Remove unused 'iface_clk' property from dma-controller node arm64: dts: qcom: ipq6018: Remove unused 'qcom,config-pipe-trust-reg' property arm64: dts: qcom: sm8350: Add CPU topology and idle-states arm64: dts: qcom: Drop unneeded extra device-specific includes arm64: dts: qcom: msm8916: Drop standalone smem node arm64: dts: qcom: Fix node name of rpm-msg-ram device nodes arm64: dts: qcom: msm8916-asus-z00l: Add sensors arm64: dts: qcom: msm8916-asus-z00l: Add SDCard arm64: dts: qcom: msm8916-asus-z00l: Add touchscreen arm64: dts: qcom: sdm845-oneplus: remove devinfo-size from ramoops node ...
2021-11-03Merge tag 'soc-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds25-4303/+47
Pull ARM SoC updates from Arnd Bergmann: "The SoC updates this time are mainly removing obsolete code from the OMAP2 platform, another step in the eternal cleanup of that platform. There are two new SoCs getting added: STMicroelectronics stm32mp13 and Microchip lan966. Both fit into existing platforms and require minimal changes here. A couple of MAINTAINER file updates relate to those changes, and update some file paths" * tag 'soc-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (28 commits) MAINTAINERS: Update BCM7XXX entry with additional patterns MAINTAINERS: add pinctrl-apple-gpio to ARM/APPLE MACHINE MAINTAINERS: Add pasemi i2c to ARM/APPLE MACHINE ARM: SPEAr: Update MAINTAINERS entries ARM: OMAP2+: Drop unused CM defines for am3 ARM: OMAP2+: Drop unused CM and SCRM defines for omap4 ARM: OMAP2+: Drop unused CM and SCRM defines for omap5 ARM: OMAP2+: Drop unused CM defines for dra7 ARM: OMAP2+: Drop unused PRM defines for am3 ARM: OMAP2+: Drop unused PRM defines for am4 ARM: OMAP2+: Drop unused PRM defines for omap4 ARM: OMAP2+: Drop unused PRM defines for omap5 ARM: OMAP2+: Drop unused PRM defines for dra7 ARM: OMAP2+: Fix comment typo ARM: OMAP2+: Fix typo in some comments ARM: at91: add basic support for new SoC family lan966 dt-bindings: arm: at91: Document lan966 pcb8291 and pcb8290 boards ARM: at91: Documentation: add lan966 family ARM: at91: Documentation: add sama7g5 family MAINTAINERS: add an entry for NXP S32G boards ...
2021-11-02Merge tag 'devicetree-for-5.16' of ↵Linus Torvalds3-24/+6
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree updates from Rob Herring: - Convert /reserved-memory bindings to schemas - Convert a bunch of NFC bindings to schemas - Convert bindings to schema: Xilinx USB, Freescale DDR controller, Arm CCI-400, UBlox Neo-6M, 1-Wire GPIO, MSI controller, ASpeed LPC, OMAP and Inside-Secure HWRNG, register-bit-led, OV5640, Silead GSL1680, Elan ekth3000, Marvell bluetooth, TI wlcore, TI bluetooth, ESP ESP8089, tlm,trusted-foundations, Microchip cap11xx, Ralink SoCs and boards, and TI sysc - New binding schemas for: msi-ranges, Aspeed UART routing controller, palmbus, Xylon LogiCVC display controller, Mediatek's MT7621 SDRAM memory controller, and Apple M1 PCIe host - Run schema checks for %.dtb targets - Improve build time when using DT_SCHEMA_FILES - Improve error message when dtschema is not found - Various doc reference fixes in MAINTAINERS - Convert architectures to common CPU h/w ID parsing function of_get_cpu_hwid(). - Allow for empty NUMA node IDs which may be hotplugged - Cleanup of __fdt_scan_reserved_mem() - Constify device_node parameters - Update dtc to upstream v1.6.1-19-g0a3a9d3449c8. Adds new checks 'node_name_vs_property_name' and 'interrupt_map'. - Enable dtc 'unit_address_format' warning by default - Fix unittest EXPECT text for gpio hog errors * tag 'devicetree-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (97 commits) dt-bindings: net: ti,bluetooth: Document default max-speed dt-bindings: pci: rcar-pci-ep: Document r8a7795 dt-bindings: net: qcom,ipa: IPA does support up to two iommus of/fdt: Remove of_scan_flat_dt() usage for __fdt_scan_reserved_mem() of: unittest: document intentional interrupt-map provider build warning of: unittest: fix EXPECT text for gpio hog errors of/unittest: Disable new dtc node_name_vs_property_name and interrupt_map warnings scripts/dtc: Update to upstream version v1.6.1-19-g0a3a9d3449c8 dt-bindings: arm: firmware: tlm,trusted-foundations: Convert txt bindings to yaml dt-bindings: display: tilcd: Fix endpoint addressing in example dt-bindings: input: microchip,cap11xx: Convert txt bindings to yaml dt-bindings: ufs: exynos-ufs: add exynosautov9 compatible dt-bindings: ufs: exynos-ufs: add io-coherency property dt-bindings: mips: convert Ralink SoCs and boards to schema dt-bindings: display: xilinx: Fix example with psgtr dt-bindings: net: nfc: nxp,pn544: Convert txt bindings to yaml dt-bindings: Add a help message when dtschema tools are missing dt-bindings: bus: ti-sysc: Update to use yaml binding dt-bindings: sram: Allow numbers in sram region node name dt-bindings: display: Document the Xylon LogiCVC display controller ...
2021-11-02Merge tag 'drm-next-2021-11-03' of git://anongit.freedesktop.org/drm/drmLinus Torvalds15-0/+15
Pull drm updates from Dave Airlie: "Summary below. i915 starts to add support for DG2 GPUs, enables DG1 and ADL-S support by default, lots of work to enable DisplayPort 2.0 across drivers. Lots of documentation updates and fixes across the board. core: - improve dma_fence, lease and resv documentation - shmem-helpers: allocate WC pages on x86, use vmf_insert_pin - sched fixes/improvements - allow empty drm leases - add dma resv iterator - add more DP 2.0 headers - DP MST helper improvements for DP2.0 dma-buf: - avoid warnings, remove fence trace macros bridge: - new helper to get rid of panels - probe improvements for it66121 - enable DSI EOTP for anx7625 fbdev: - efifb: release runtime PM on destroy ttm: - kerneldoc switch - helper to clear all DMA mappings - pool shrinker optimizaton - remove ttm_tt_destroy_common - update ttm_move_memcpy for async use panel: - add new panel-edp driver amdgpu: - Initial DP 2.0 support - Initial USB4 DP tunnelling support - Aldebaran MCE support - Modifier support for DCC image stores for GFX 10.3 - Display rework for better FP code handling - Yellow Carp/Cyan Skillfish updates - Cyan Skillfish display support - convert vega/navi to IP discovery asic enumeration - validate IP discovery table - RAS improvements - Lots of fixes i915: - DG1 PCI IDs + LMEM discovery/placement - DG1 GuC submission by default - ADL-S PCI IDs updated + enabled by default - ADL-P (XE_LPD) fixed and updates - DG2 display fixes - PXP protected object support for Gen12 integrated - expose multi-LRC submission interface for GuC - export logical engine instance to user - Disable engine bonding on Gen12+ - PSR cleanup - PSR2 selective fetch by default - DP 2.0 prep work - VESA vendor block + MSO use of it - FBC refactor - try again to fix fast-narrow vs slow-wide eDP training - use THP when IOMMU enabled - LMEM backup/restore for suspend/resume - locking simplification - GuC major reworking - async flip VT-D workaround changes - DP link training improvements - misc display refactorings bochs: - new PCI ID rcar-du: - Non-contiguious buffer import support for rcar-du - r8a779a0 support prep omapdrm: - COMPILE_TEST fixes sti: - COMPILE_TEST fixes msm: - fence ordering improvements - eDP support in DP sub-driver - dpu irq handling cleanup - CRC support for making igt happy - NO_CONNECTOR bridge support - dsi: 14nm phy support for msm8953 - mdp5: msm8x53, sdm450, sdm632 support stm: - layer alpha + zpo support v3d: - fix Vulkan CTS failure - support multiple sync objects gud: - add R8/RGB332/RGB888 pixel formats vc4: - convert to new bridge helpers vgem: - use shmem helpers virtio: - support mapping exported vram zte: - remove obsolete driver rockchip: - use bridge attach no connector for LVDS/RGB" * tag 'drm-next-2021-11-03' of git://anongit.freedesktop.org/drm/drm: (1259 commits) drm/amdgpu/gmc6: fix DMA mask from 44 to 40 bits drm/amd/display: MST support for DPIA drm/amdgpu: Fix even more out of bound writes from debugfs drm/amdgpu/discovery: add SDMA IP instance info for soc15 parts drm/amdgpu/discovery: add UVD/VCN IP instance info for soc15 parts drm/amdgpu/UAPI: rearrange header to better align related items drm/amd/display: Enable dpia in dmub only for DCN31 B0 drm/amd/display: Fix USB4 hot plug crash issue drm/amd/display: Fix deadlock when falling back to v2 from v3 drm/amd/display: Fallback to clocks which meet requested voltage on DCN31 drm/amd/display: move FPU associated DCN301 code to DML folder drm/amd/display: fix link training regression for 1 or 2 lane drm/amd/display: add two lane settings training options drm/amd/display: decouple hw_lane_settings from dpcd_lane_settings drm/amd/display: implement decide lane settings drm/amd/display: adopt DP2.0 LT SCR revision 8 drm/amd/display: FEC configuration for dpia links in MST mode drm/amd/display: FEC configuration for dpia links drm/amd/display: Add workaround flag for EDID read on certain docks drm/amd/display: Set phy_mux_sel bit in dmub scratch register ...
2021-11-02Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds35-117/+339
Pull ARM updates from Russell King: - Rejig task/thread info to place thread info in task struct - Amba bus cleanups (removing unused functions) - Handle Amba device probe without IRQ domains - Parse linux,usable-memory-range in decompressor - Mark OCRAM as read-only after initialisation - Refactor page fault handling - Fix PXN handling with LPAE kernels - Warning and build fixes from Arnd * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (32 commits) ARM: 9151/1: Thumb2: avoid __builtin_thread_pointer() on Clang ARM: 9150/1: Fix PID_IN_CONTEXTIDR regression when THREAD_INFO_IN_TASK=y ARM: 9147/1: add printf format attribute to early_print() ARM: 9146/1: RiscPC needs older gcc version ARM: 9145/1: patch: fix BE32 compilation ARM: 9144/1: forbid ftrace with clang and thumb2_kernel ARM: 9143/1: add CONFIG_PHYS_OFFSET default values ARM: 9142/1: kasan: work around LPAE build warning ARM: 9140/1: allow compile-testing without machine record ARM: 9137/1: disallow CONFIG_THUMB with ARMv4 ARM: 9136/1: ARMv7-M uses BE-8, not BE-32 ARM: 9135/1: kprobes: address gcc -Wempty-body warning ARM: 9101/1: sa1100/assabet: convert LEDs to gpiod APIs ARM: 9131/1: mm: Fix PXN process with LPAE feature ARM: 9130/1: mm: Provide die_kernel_fault() helper ARM: 9126/1: mm: Kill page table base print in show_pte() ARM: 9127/1: mm: Cleanup access_error() ARM: 9129/1: mm: Kill task_struct argument for __do_page_fault() ARM: 9128/1: mm: Refactor the __do_page_fault() ARM: imx6: mark OCRAM mapping read-only ...
2021-11-02Merge branches 'clk-imx', 'clk-ux500' and 'clk-debugfs' into clk-nextStephen Boyd1-0/+1
* clk-imx: (21 commits) clk: imx: Make CLK_IMX8ULP select MXC_CLK clk: imx: imx6ul: Fix csi clk gate register clk: imx: imx6ul: Move csi_sel mux to correct base register clk: imx: Fix the build break when clk-imx8ulp build as module clk: imx: Add the pcc reset controller support on imx8ulp clk: imx: Add clock driver for imx8ulp clk: imx: Update the pfdv2 for 8ulp specific support clk: imx: disable the pfd when set pfdv2 clock rate clk: imx: Add 'CLK_SET_RATE_NO_REPARENT' for composite-7ulp clk: imx: disable i.mx7ulp composite clock during initialization clk: imx: Update the compsite driver to support imx8ulp clk: imx: Update the pllv4 to support imx8ulp dt-bindings: clock: Add imx8ulp clock support clk: imx: Rework imx_clk_hw_pll14xx wrapper clk: imx: Rework all imx_clk_hw_composite wrappers clk: imx: Rework all clk_hw_register_divider wrappers clk: imx: Rework all clk_hw_register_mux wrappers clk: imx: Rework all clk_hw_register_gate2 wrappers clk: imx: Rework all clk_hw_register_gate wrappers clk: imx: Make mux/mux2 clk based helpers use clk_hw based ones ... * clk-ux500: clk: ux500: Add driver for the reset portions of PRCC dt-bindings: clock: u8500: Rewrite in YAML and extend * clk-debugfs: clk: use clk_core_get_rate_recalc() in clk_rate_get()
2021-11-02Merge tag 'net-next-for-5.16' of ↵Linus Torvalds1-5/+0
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Remove socket skb caches - Add a SO_RESERVE_MEM socket op to forward allocate buffer space and avoid memory accounting overhead on each message sent - Introduce managed neighbor entries - added by control plane and resolved by the kernel for use in acceleration paths (BPF / XDP right now, HW offload users will benefit as well) - Make neighbor eviction on link down controllable by userspace to work around WiFi networks with bad roaming implementations - vrf: Rework interaction with netfilter/conntrack - fq_codel: implement L4S style ce_threshold_ect1 marking - sch: Eliminate unnecessary RCU waits in mini_qdisc_pair_swap() BPF: - Add support for new btf kind BTF_KIND_TAG, arbitrary type tagging as implemented in LLVM14 - Introduce bpf_get_branch_snapshot() to capture Last Branch Records - Implement variadic trace_printk helper - Add a new Bloomfilter map type - Track <8-byte scalar spill and refill - Access hw timestamp through BPF's __sk_buff - Disallow unprivileged BPF by default - Document BPF licensing Netfilter: - Introduce egress hook for looking at raw outgoing packets - Allow matching on and modifying inner headers / payload data - Add NFT_META_IFTYPE to match on the interface type either from ingress or egress Protocols: - Multi-Path TCP: - increase default max additional subflows to 2 - rework forward memory allocation - add getsockopts: MPTCP_INFO, MPTCP_TCPINFO, MPTCP_SUBFLOW_ADDRS - MCTP flow support allowing lower layer drivers to configure msg muxing as needed - Automatic Multicast Tunneling (AMT) driver based on RFC7450 - HSR support the redbox supervision frames (IEC-62439-3:2018) - Support for the ip6ip6 encapsulation of IOAM - Netlink interface for CAN-FD's Transmitter Delay Compensation - Support SMC-Rv2 eliminating the current same-subnet restriction, by exploiting the UDP encapsulation feature of RoCE adapters - TLS: add SM4 GCM/CCM crypto support - Bluetooth: initial support for link quality and audio/codec offload Driver APIs: - Add a batched interface for RX buffer allocation in AF_XDP buffer pool - ethtool: Add ability to control transceiver modules' power mode - phy: Introduce supported interfaces bitmap to express MAC capabilities and simplify PHY code - Drop rtnl_lock from DSA .port_fdb_{add,del} callbacks New drivers: - WiFi driver for Realtek 8852AE 802.11ax devices (rtw89) - Ethernet driver for ASIX AX88796C SPI device (x88796c) Drivers: - Broadcom PHYs - support 72165, 7712 16nm PHYs - support IDDQ-SR for additional power savings - PHY support for QCA8081, QCA9561 PHYs - NXP DPAA2: support for IRQ coalescing - NXP Ethernet (enetc): support for software TCP segmentation - Renesas Ethernet (ravb) - support DMAC and EMAC blocks of Gigabit-capable IP found on RZ/G2L SoC - Intel 100G Ethernet - support for eswitch offload of TC/OvS flow API, including offload of GRE, VxLAN, Geneve tunneling - support application device queues - ability to assign Rx and Tx queues to application threads - PTP and PPS (pulse-per-second) extensions - Broadcom Ethernet (bnxt) - devlink health reporting and device reload extensions - Mellanox Ethernet (mlx5) - offload macvlan interfaces - support HW offload of TC rules involving OVS internal ports - support HW-GRO and header/data split - support application device queues - Marvell OcteonTx2: - add XDP support for PF - add PTP support for VF - Qualcomm Ethernet switch (qca8k): support for QCA8328 - Realtek Ethernet DSA switch (rtl8366rb) - support bridge offload - support STP, fast aging, disabling address learning - support for Realtek RTL8365MB-VC, a 4+1 port 10M/100M/1GE switch - Mellanox Ethernet/IB switch (mlxsw) - multi-level qdisc hierarchy offload (e.g. RED, prio and shaping) - offload root TBF qdisc as port shaper - support multiple routing interface MAC address prefixes - support for IP-in-IP with IPv6 underlay - MediaTek WiFi (mt76) - mt7921 - ASPM, 6GHz, SDIO and testmode support - mt7915 - LED and TWT support - Qualcomm WiFi (ath11k) - include channel rx and tx time in survey dump statistics - support for 80P80 and 160 MHz bandwidths - support channel 2 in 6 GHz band - spectral scan support for QCN9074 - support for rx decapsulation offload (data frames in 802.3 format) - Qualcomm phone SoC WiFi (wcn36xx) - enable Idle Mode Power Save (IMPS) to reduce power consumption during idle - Bluetooth driver support for MediaTek MT7922 and MT7921 - Enable support for AOSP Bluetooth extension in Qualcomm WCN399x and Realtek 8822C/8852A - Microsoft vNIC driver (mana) - support hibernation and kexec - Google vNIC driver (gve) - support for jumbo frames - implement Rx page reuse Refactor: - Make all writes to netdev->dev_addr go thru helpers, so that we can add this address to the address rbtree and handle the updates - Various TCP cleanups and optimizations including improvements to CPU cache use - Simplify the gnet_stats, Qdisc stats' handling and remove qdisc->running sequence counter - Driver changes and API updates to address devlink locking deficiencies" * tag 'net-next-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2122 commits) Revert "net: avoid double accounting for pure zerocopy skbs" selftests: net: add arp_ndisc_evict_nocarrier net: ndisc: introduce ndisc_evict_nocarrier sysctl parameter net: arp: introduce arp_evict_nocarrier sysctl parameter libbpf: Deprecate AF_XDP support kbuild: Unify options for BTF generation for vmlinux and modules selftests/bpf: Add a testcase for 64-bit bounds propagation issue. bpf: Fix propagation of signed bounds from 64-bit min/max into 32-bit. bpf: Fix propagation of bounds from 64-bit min/max into 32-bit and var_off. net: vmxnet3: remove multiple false checks in vmxnet3_ethtool.c net: avoid double accounting for pure zerocopy skbs tcp: rename sk_wmem_free_skb netdevsim: fix uninit value in nsim_drv_configure_vfs() selftests/bpf: Fix also no-alu32 strobemeta selftest bpf: Add missing map_delete_elem method to bloom filter map selftests/bpf: Add bloom map success test for userspace calls bpf: Add alignment padding for "map_extra" + consolidate holes bpf: Bloom filter map naming fixups selftests/bpf: Add test cases for struct_ops prog bpf: Add dummy BPF STRUCT_OPS for test purpose ...
2021-11-02xen: allow pv-only hypercalls only with CONFIG_XEN_PVJuergen Gross2-2/+0
Put the definitions of the hypercalls usable only by pv guests inside CONFIG_XEN_PV sections. On Arm two dummy functions related to pv hypercalls can be removed. While at it remove the no longer supported tmem hypercall definition. Signed-off-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20211028081221.2475-3-jgross@suse.com Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2021-11-02Merge branches 'devel-stable' and 'misc' into for-linusRussell King (Oracle)35-117/+339
2021-11-01Merge tag 'trace-v5.16' of ↵Linus Torvalds7-20/+66
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing updates from Steven Rostedt: - kprobes: Restructured stack unwinder to show properly on x86 when a stack dump happens from a kretprobe callback. - Fix to bootconfig parsing - Have tracefs allow owner and group permissions by default (only denying others). There's been pressure to allow non root to tracefs in a controlled fashion, and using groups is probably the safest. - Bootconfig memory managament updates. - Bootconfig clean up to have the tools directory be less dependent on changes in the kernel tree. - Allow perf to be traced by function tracer. - Rewrite of function graph tracer to be a callback from the function tracer instead of having its own trampoline (this change will happen on an arch by arch basis, and currently only x86_64 implements it). - Allow multiple direct trampolines (bpf hooks to functions) be batched together in one synchronization. - Allow histogram triggers to add variables that can perform calculations against the event's fields. - Use the linker to determine architecture callbacks from the ftrace trampoline to allow for proper parameter prototypes and prevent warnings from the compiler. - Extend histogram triggers to key off of variables. - Have trace recursion use bit magic to determine preempt context over if branches. - Have trace recursion disable preemption as all use cases do anyway. - Added testing for verification of tracing utilities. - Various small clean ups and fixes. * tag 'trace-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (101 commits) tracing/histogram: Fix semicolon.cocci warnings tracing/histogram: Fix documentation inline emphasis warning tracing: Increase PERF_MAX_TRACE_SIZE to handle Sentinel1 and docker together tracing: Show size of requested perf buffer bootconfig: Initialize ret in xbc_parse_tree() ftrace: do CPU checking after preemption disabled ftrace: disable preemption when recursion locked tracing/histogram: Document expression arithmetic and constants tracing/histogram: Optimize division by a power of 2 tracing/histogram: Covert expr to const if both operands are constants tracing/histogram: Simplify handling of .sym-offset in expressions tracing: Fix operator precedence for hist triggers expression tracing: Add division and multiplication support for hist triggers tracing: Add support for creating hist trigger variables from literal selftests/ftrace: Stop tracing while reading the trace file by default MAINTAINERS: Update KPROBES and TRACING entries test_kprobes: Move it from kernel/ to lib/ docs, kprobes: Remove invalid URL and add new reference samples/kretprobes: Fix return value if register_kretprobe() failed lib/bootconfig: Fix the xbc_get_info kerneldoc ...
2021-11-01Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextJakub Kicinski1-5/+0
Alexei Starovoitov says: ==================== pull-request: bpf-next 2021-11-01 We've added 181 non-merge commits during the last 28 day(s) which contain a total of 280 files changed, 11791 insertions(+), 5879 deletions(-). The main changes are: 1) Fix bpf verifier propagation of 64-bit bounds, from Alexei. 2) Parallelize bpf test_progs, from Yucong and Andrii. 3) Deprecate various libbpf apis including af_xdp, from Andrii, Hengqi, Magnus. 4) Improve bpf selftests on s390, from Ilya. 5) bloomfilter bpf map type, from Joanne. 6) Big improvements to JIT tests especially on Mips, from Johan. 7) Support kernel module function calls from bpf, from Kumar. 8) Support typeless and weak ksym in light skeleton, from Kumar. 9) Disallow unprivileged bpf by default, from Pawan. 10) BTF_KIND_DECL_TAG support, from Yonghong. 11) Various bpftool cleanups, from Quentin. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (181 commits) libbpf: Deprecate AF_XDP support kbuild: Unify options for BTF generation for vmlinux and modules selftests/bpf: Add a testcase for 64-bit bounds propagation issue. bpf: Fix propagation of signed bounds from 64-bit min/max into 32-bit. bpf: Fix propagation of bounds from 64-bit min/max into 32-bit and var_off. selftests/bpf: Fix also no-alu32 strobemeta selftest bpf: Add missing map_delete_elem method to bloom filter map selftests/bpf: Add bloom map success test for userspace calls bpf: Add alignment padding for "map_extra" + consolidate holes bpf: Bloom filter map naming fixups selftests/bpf: Add test cases for struct_ops prog bpf: Add dummy BPF STRUCT_OPS for test purpose bpf: Factor out helpers for ctx access checking bpf: Factor out a helper to prepare trampoline for struct_ops prog selftests, bpf: Fix broken riscv build riscv, libbpf: Add RISC-V (RV64) support to bpf_tracing.h tools, build: Add RISC-V to HOSTARCH parsing riscv, bpf: Increase the maximum number of iterations selftests, bpf: Add one test for sockmap with strparser selftests, bpf: Fix test_txmsg_ingress_parser error ... ==================== Link: https://lore.kernel.org/r/20211102013123.9005-1-alexei.starovoitov@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-01Merge tag 'overflow-v5.16-rc1' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull overflow updates from Kees Cook: "The end goal of the current buffer overflow detection work[0] is to gain full compile-time and run-time coverage of all detectable buffer overflows seen via array indexing or memcpy(), memmove(), and memset(). The str*() family of functions already have full coverage. While much of the work for these changes have been on-going for many releases (i.e. 0-element and 1-element array replacements, as well as avoiding false positives and fixing discovered overflows[1]), this series contains the foundational elements of several related buffer overflow detection improvements by providing new common helpers and FORTIFY_SOURCE changes needed to gain the introspection required for compiler visibility into array sizes. Also included are a handful of already Acked instances using the helpers (or related clean-ups), with many more waiting at the ready to be taken via subsystem-specific trees[2]. The new helpers are: - struct_group() for gaining struct member range introspection - memset_after() and memset_startat() for clearing to the end of structures - DECLARE_FLEX_ARRAY() for using flex arrays in unions or alone in structs Also included is the beginning of the refactoring of FORTIFY_SOURCE to support memcpy() introspection, fix missing and regressed coverage under GCC, and to prepare to fix the currently broken Clang support. Finishing this work is part of the larger series[0], but depends on all the false positives and buffer overflow bug fixes to have landed already and those that depend on this series to land. As part of the FORTIFY_SOURCE refactoring, a set of both a compile-time and run-time tests are added for FORTIFY_SOURCE and the mem*()-family functions respectively. The compile time tests have found a legitimate (though corner-case) bug[6] already. Please note that the appearance of "panic" and "BUG" in the FORTIFY_SOURCE refactoring are the result of relocating existing code, and no new use of those code-paths are expected nor desired. Finally, there are two tree-wide conversions for 0-element arrays and flexible array unions to gain sane compiler introspection coverage that result in no known object code differences. After this series (and the changes that have now landed via netdev and usb), we are very close to finally being able to build with -Warray-bounds and -Wzero-length-bounds. However, due corner cases in GCC[3] and Clang[4], I have not included the last two patches that turn on these options, as I don't want to introduce any known warnings to the build. Hopefully these can be solved soon" Link: https://lore.kernel.org/lkml/20210818060533.3569517-1-keescook@chromium.org/ [0] Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/log/?qt=grep&q=FORTIFY_SOURCE [1] Link: https://lore.kernel.org/lkml/202108220107.3E26FE6C9C@keescook/ [2] Link: https://lore.kernel.org/lkml/3ab153ec-2798-da4c-f7b1-81b0ac8b0c5b@roeck-us.net/ [3] Link: https://bugs.llvm.org/show_bug.cgi?id=51682 [4] Link: https://lore.kernel.org/lkml/202109051257.29B29745C0@keescook/ [5] Link: https://lore.kernel.org/lkml/20211020200039.170424-1-keescook@chromium.org/ [6] * tag 'overflow-v5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (30 commits) fortify: strlen: Avoid shadowing previous locals compiler-gcc.h: Define __SANITIZE_ADDRESS__ under hwaddress sanitizer treewide: Replace 0-element memcpy() destinations with flexible arrays treewide: Replace open-coded flex arrays in unions stddef: Introduce DECLARE_FLEX_ARRAY() helper btrfs: Use memset_startat() to clear end of struct string.h: Introduce memset_startat() for wiping trailing members and padding xfrm: Use memset_after() to clear padding string.h: Introduce memset_after() for wiping trailing members/padding lib: Introduce CONFIG_MEMCPY_KUNIT_TEST fortify: Add compile-time FORTIFY_SOURCE tests fortify: Allow strlen() and strnlen() to pass compile-time known lengths fortify: Prepare to improve strnlen() and strlen() warnings fortify: Fix dropped strcpy() compile-time write overflow check fortify: Explicitly disable Clang support fortify: Move remaining fortify helpers into fortify-string.h lib/string: Move helper functions out of string.c compiler_types.h: Remove __compiletime_object_size() cm4000_cs: Use struct_group() to zero struct cm4000_dev region can: flexcan: Use struct_group() to zero struct flexcan_regs regions ...
2021-11-01Merge tag 'sched-core-2021-11-01' of ↵Linus Torvalds2-4/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler updates from Thomas Gleixner: - Revert the printk format based wchan() symbol resolution as it can leak the raw value in case that the symbol is not resolvable. - Make wchan() more robust and work with all kind of unwinders by enforcing that the task stays blocked while unwinding is in progress. - Prevent sched_fork() from accessing an invalid sched_task_group - Improve asymmetric packing logic - Extend scheduler statistics to RT and DL scheduling classes and add statistics for bandwith burst to the SCHED_FAIR class. - Properly account SCHED_IDLE entities - Prevent a potential deadlock when initial priority is assigned to a newly created kthread. A recent change to plug a race between cpuset and __sched_setscheduler() introduced a new lock dependency which is now triggered. Break the lock dependency chain by moving the priority assignment to the thread function. - Fix the idle time reporting in /proc/uptime for NOHZ enabled systems. - Improve idle balancing in general and especially for NOHZ enabled systems. - Provide proper interfaces for live patching so it does not have to fiddle with scheduler internals. - Add cluster aware scheduling support. - A small set of tweaks for RT (irqwork, wait_task_inactive(), various scheduler options and delaying mmdrop) - The usual small tweaks and improvements all over the place * tag 'sched-core-2021-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (69 commits) sched/fair: Cleanup newidle_balance sched/fair: Remove sysctl_sched_migration_cost condition sched/fair: Wait before decaying max_newidle_lb_cost sched/fair: Skip update_blocked_averages if we are defering load balance sched/fair: Account update_blocked_averages in newidle_balance cost x86: Fix __get_wchan() for !STACKTRACE sched,x86: Fix L2 cache mask sched/core: Remove rq_relock() sched: Improve wake_up_all_idle_cpus() take #2 irq_work: Also rcuwait for !IRQ_WORK_HARD_IRQ on PREEMPT_RT irq_work: Handle some irq_work in a per-CPU thread on PREEMPT_RT irq_work: Allow irq_work_sync() to sleep if irq_work() no IRQ support. sched/rt: Annotate the RT balancing logic irqwork as IRQ_WORK_HARD_IRQ sched: Add cluster scheduler level for x86 sched: Add cluster scheduler level in core and related Kconfig for ARM64 topology: Represent clusters of CPUs within a die sched: Disable -Wunused-but-set-variable sched: Add wrapper for get_wchan() to keep task blocked x86: Fix get_wchan() to support the ORC unwinder proc: Use task_is_running() for wchan in /proc/$pid/stat ...
2021-11-01Merge tag 'timers-core-2021-10-31' of ↵Linus Torvalds1-15/+22
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer updates from Thomas Gleixner: "Time, timers and timekeeping updates: - No core updates - No new clocksource/event driver - A large rework of the ARM architected timer driver to prepare for the support of the upcoming ARMv8.6 support - Fix Kconfig options for Exynos MCT, Samsung PWM and TI DM timers - Address a namespace collison in the ARC sp804 timer driver" * tag 'timers-core-2021-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource/drivers/timer-ti-dm: Select TIMER_OF clocksource/drivers/exynosy: Depend on sub-architecture for Exynos MCT and Samsung PWM clocksource/drivers/arch_arm_timer: Move workaround synchronisation around clocksource/drivers/arm_arch_timer: Fix masking for high freq counters clocksource/drivers/arm_arch_timer: Drop unnecessary ISB on CVAL programming clocksource/drivers/arm_arch_timer: Remove any trace of the TVAL programming interface clocksource/drivers/arm_arch_timer: Work around broken CVAL implementations clocksource/drivers/arm_arch_timer: Advertise 56bit timer to the core code clocksource/drivers/arm_arch_timer: Move MMIO timer programming over to CVAL clocksource/drivers/arm_arch_timer: Fix MMIO base address vs callback ordering issue clocksource/drivers/arm_arch_timer: Move drop _tval from erratum function names clocksource/drivers/arm_arch_timer: Move system register timer programming over to CVAL clocksource/drivers/arm_arch_timer: Extend write side of timer register accessors to u64 clocksource/drivers/arm_arch_timer: Drop CNT*_TVAL read accessors clocksource/arm_arch_timer: Add build-time guards for unhandled register accesses clocksource/drivers/arc_timer: Eliminate redefined macro error
2021-11-01Merge tag 'locking-core-2021-10-31' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking updates from Thomas Gleixner: - Move futex code into kernel/futex/ and split up the kitchen sink into seperate files to make integration of sys_futex_waitv() simpler. - Add a new sys_futex_waitv() syscall which allows to wait on multiple futexes. The main use case is emulating Windows' WaitForMultipleObjects which allows Wine to improve the performance of Windows Games. Also native Linux games can benefit from this interface as this is a common wait pattern for this kind of applications. - Add context to ww_mutex_trylock() to provide a path for i915 to rework their eviction code step by step without making lockdep upset until the final steps of rework are completed. It's also useful for regulator and TTM to avoid dropping locks in the non contended path. - Lockdep and might_sleep() cleanups and improvements - A few improvements for the RT substitutions. - The usual small improvements and cleanups. * tag 'locking-core-2021-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (44 commits) locking: Remove spin_lock_flags() etc locking/rwsem: Fix comments about reader optimistic lock stealing conditions locking: Remove rcu_read_{,un}lock() for preempt_{dis,en}able() locking/rwsem: Disable preemption for spinning region docs: futex: Fix kernel-doc references futex: Fix PREEMPT_RT build futex2: Documentation: Document sys_futex_waitv() uAPI selftests: futex: Test sys_futex_waitv() wouldblock selftests: futex: Test sys_futex_waitv() timeout selftests: futex: Add sys_futex_waitv() test futex,arm: Wire up sys_futex_waitv() futex,x86: Wire up sys_futex_waitv() futex: Implement sys_futex_waitv() futex: Simplify double_lock_hb() futex: Split out wait/wake futex: Split out requeue futex: Rename mark_wake_futex() futex: Rename: match_futex() futex: Rename: hb_waiter_{inc,dec,pending}() futex: Split out PI futex ...
2021-11-01Merge tag 'irq-core-2021-10-31' of ↵Linus Torvalds8-19/+13
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: "Updates for the interrupt subsystem: Core changes: - Prevent a potential deadlock when initial priority is assigned to a newly created interrupt thread. A recent change to plug a race between cpuset and __sched_setscheduler() introduced a new lock dependency which is now triggered. Break the lock dependency chain by moving the priority assignment to the thread function. - A couple of small updates to make the irq core RT safe. - Confine the irq_cpu_online/offline() API to the only left unfixable user Cavium Octeon so that it does not grow new usage. - A small documentation update Driver changes: - A large cross architecture rework to move irq_enter/exit() into the architecture code to make addressing the NOHZ_FULL/RCU issues simpler. - The obligatory new irq chip driver for Microchip EIC - Modularize a few irq chip drivers - Expand usage of devm_*() helpers throughout the driver code - The usual small fixes and improvements all over the place" * tag 'irq-core-2021-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (53 commits) h8300: Fix linux/irqchip.h include mess dt-bindings: irqchip: renesas-irqc: Document r8a774e1 bindings MIPS: irq: Avoid an unused-variable error genirq: Hide irq_cpu_{on,off}line() behind a deprecated option irqchip/mips-gic: Get rid of the reliance on irq_cpu_online() MIPS: loongson64: Drop call to irq_cpu_offline() irq: remove handle_domain_{irq,nmi}() irq: remove CONFIG_HANDLE_DOMAIN_IRQ_IRQENTRY irq: riscv: perform irqentry in entry code irq: openrisc: perform irqentry in entry code irq: csky: perform irqentry in entry code irq: arm64: perform irqentry in entry code irq: arm: perform irqentry in entry code irq: add a (temporary) CONFIG_HANDLE_DOMAIN_IRQ_IRQENTRY irq: nds32: avoid CONFIG_HANDLE_DOMAIN_IRQ irq: arc: avoid CONFIG_HANDLE_DOMAIN_IRQ irq: add generic_handle_arch_irq() irq: unexport handle_irq_desc() irq: simplify handle_domain_{irq,nmi}() irq: mips: simplify do_domain_IRQ() ...
2021-11-01Merge tag 'folio-5.16' of git://git.infradead.org/users/willy/pagecacheLinus Torvalds1-0/+1
Pull memory folios from Matthew Wilcox: "Add memory folios, a new type to represent either order-0 pages or the head page of a compound page. This should be enough infrastructure to support filesystems converting from pages to folios. The point of all this churn is to allow filesystems and the page cache to manage memory in larger chunks than PAGE_SIZE. The original plan was to use compound pages like THP does, but I ran into problems with some functions expecting only a head page while others expect the precise page containing a particular byte. The folio type allows a function to declare that it's expecting only a head page. Almost incidentally, this allows us to remove various calls to VM_BUG_ON(PageTail(page)) and compound_head(). This converts just parts of the core MM and the page cache. For 5.17, we intend to convert various filesystems (XFS and AFS are ready; other filesystems may make it) and also convert more of the MM and page cache to folios. For 5.18, multi-page folios should be ready. The multi-page folios offer some improvement to some workloads. The 80% win is real, but appears to be an artificial benchmark (postgres startup, which isn't a serious workload). Real workloads (eg building the kernel, running postgres in a steady state, etc) seem to benefit between 0-10%. I haven't heard of any performance losses as a result of this series. Nobody has done any serious performance tuning; I imagine that tweaking the readahead algorithm could provide some more interesting wins. There are also other places where we could choose to create large folios and currently do not, such as writes that are larger than PAGE_SIZE. I'd like to thank all my reviewers who've offered review/ack tags: Christoph Hellwig, David Howells, Jan Kara, Jeff Layton, Johannes Weiner, Kirill A. Shutemov, Michal Hocko, Mike Rapoport, Vlastimil Babka, William Kucharski, Yu Zhao and Zi Yan. I'd also like to thank those who gave feedback I incorporated but haven't offered up review tags for this part of the series: Nick Piggin, Mel Gorman, Ming Lei, Darrick Wong, Ted Ts'o, John Hubbard, Hugh Dickins, and probably a few others who I forget" * tag 'folio-5.16' of git://git.infradead.org/users/willy/pagecache: (90 commits) mm/writeback: Add folio_write_one mm/filemap: Add FGP_STABLE mm/filemap: Add filemap_get_folio mm/filemap: Convert mapping_get_entry to return a folio mm/filemap: Add filemap_add_folio() mm/filemap: Add filemap_alloc_folio mm/page_alloc: Add folio allocation functions mm/lru: Add folio_add_lru() mm/lru: Convert __pagevec_lru_add_fn to take a folio mm: Add folio_evictable() mm/workingset: Convert workingset_refault() to take a folio mm/filemap: Add readahead_folio() mm/filemap: Add folio_mkwrite_check_truncate() mm/filemap: Add i_blocks_per_folio() mm/writeback: Add folio_redirty_for_writepage() mm/writeback: Add folio_account_redirty() mm/writeback: Add folio_clear_dirty_for_io() mm/writeback: Add folio_cancel_dirty() mm/writeback: Add folio_account_cleaned() mm/writeback: Add filemap_dirty_folio() ...
2021-10-30ARM: 9151/1: Thumb2: avoid __builtin_thread_pointer() on ClangArd Biesheuvel1-1/+6
If available, we use the __builtin_thread_pointer() helper to get the value of the TLS register, to help the compiler understand that it doesn't need to reload it every time we access 'current'. Unfortunately, Clang fails to emit the MRC system register read directly when building for Thumb2, and instead, it issues a call to the __aeabi_read_tp helper, which the kernel does not provide, and so this result in link failures at build time. So create a special case for this, and emit the MRC directly using an asm() block, just like we do when the helper is not available to begin with. Link: https://github.com/ClangBuiltLinux/linux/issues/1485 Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Tested-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2021-10-30ARM: 9150/1: Fix PID_IN_CONTEXTIDR regression when THREAD_INFO_IN_TASK=yArd Biesheuvel2-1/+12
The code that implements the rarely used PID_IN_CONTEXTIDR feature dereferences the 'task' field of struct thread_info directly, and this is no longer possible when THREAD_INFO_IN_TASK=y, as the 'task' field is omitted from the struct definition in that case. Instead, we should just cast the thread_info pointer to a task_struct pointer, given that the former is now the first member of the latter. So use a helper that abstracts this, and provide implementations for both cases. Reported by: Arnd Bergmann <arnd@arndb.de> Fixes: 18ed1c01a7dd ("ARM: smp: Enable THREAD_INFO_IN_TASK") Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2021-10-28Merge branch irq/remove-handle-domain-irq-20211026 into irq/irqchip-nextMarc Zyngier7-15/+13
* irq/remove-handle-domain-irq-20211026: : Large rework of the architecture entry code from Mark Rutland. : From the cover letter: : : <quote> : The handle_domain_{irq,nmi}() functions were oringally intended as a : convenience, but recent rework to entry code across the kernel tree has : demonstrated that they cause more pain than they're worth and prevent : architectures from being able to write robust entry code. : : This series reworks the irq code to remove them, handling the necessary : entry work consistently in entry code (be it architectural or generic). : </quote> MIPS: irq: Avoid an unused-variable error irq: remove handle_domain_{irq,nmi}() irq: remove CONFIG_HANDLE_DOMAIN_IRQ_IRQENTRY irq: riscv: perform irqentry in entry code irq: openrisc: perform irqentry in entry code irq: csky: perform irqentry in entry code irq: arm64: perform irqentry in entry code irq: arm: perform irqentry in entry code irq: add a (temporary) CONFIG_HANDLE_DOMAIN_IRQ_IRQENTRY irq: nds32: avoid CONFIG_HANDLE_DOMAIN_IRQ irq: arc: avoid CONFIG_HANDLE_DOMAIN_IRQ irq: add generic_handle_arch_irq() irq: unexport handle_irq_desc() irq: simplify handle_domain_{irq,nmi}() irq: mips: simplify do_domain_IRQ() irq: mips: stop (ab)using handle_domain_irq() irq: mips: simplify bcm6345_l1_irq_handle() irq: mips: avoid nested irq_enter() Signed-off-by: Marc Zyngier <maz@kernel.org>
2021-10-28BackMerge tag 'v5.15-rc7' into drm-nextDave Airlie47-371/+568
The msm next tree is based on rc3, so let's just backmerge rc7 before pulling it in. Signed-off-by: Dave Airlie <airlied@redhat.com>
2021-10-26clk: ux500: Add driver for the reset portions of PRCCLinus Walleij1-0/+1
The Ux500 PRCC (peripheral reset and clock controller) can also control reset of the IP blocks, not just clocks. As the PRCC is probed as a clock controller and we have other platforms implementing combined clock and reset controllers, follow this pattern and implement the PRCC rest controller as part of the clock driver. The reset controller needs to be selected from the machine as Ux500 has traditionally selected its mandatory subsystem prerequisites from there. Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210921184803.1757916-2-linus.walleij@linaro.org Acked-by: Ulf Hansson <ulf.hansson@linaro.org> [sboyd@kernel.org: Dropped allocation error message] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-10-26Merge tag 'arm-soc-fixes-5.15-3' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "One last set of small fixes for the soc tree: - Incorrect ethernet phy settings found on i.mx and allwinner platforms - a revert for a Qualcomm DT change that caused a boot regression - four patches for incorrect settings in i.MX DT files - new MAINTAINER file entries for dhcom boards - a Kconfig fix for a reset driver that became unselectable - three more code changes for bugs in reset drivers" * tag 'arm-soc-fixes-5.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: MAINTAINERS: Add maintainers for DHCOM i.MX6 and DHCOM/DHCOR STM32MP1 Revert "arm64: dts: qcom: sm8250: remove bus clock from the mdss node for sm8250 target" arm64: dts: imx8mm-kontron: Fix connection type for VSC8531 RGMII PHY arm64: dts: imx8mm-kontron: Fix CAN SPI clock frequency arm64: dts: imx8mm-kontron: Fix polarity of reg_rst_eth2 arm64: dts: imx8mm-kontron: Set lower limit of VDD_SNVS to 800 mV arm64: dts: imx8mm-kontron: Make sure SOC and DRAM supply voltages are correct reset: socfpga: add empty driver allowing consumers to probe reset: tegra-bpmp: Handle errors in BPMP response reset: pistachio: Re-enable driver selection reset: brcmstb-rescal: fix incorrect polarity of status bit ARM: dts: sun7i: A20-olinuxino-lime2: Fix ethernet phy-mode arm64: dts: allwinner: h5: NanoPI Neo 2: Fix ethernet node
2021-10-26Merge tag 'qcom-arm64-for-5.16-2' of ↵Arnd Bergmann4-0/+76
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt Qualcomm ARM64 DTS additional patches for v5.16 The RPM and RPMh sleep stats are introduced on a number of platforms, to aid the enablement of entering low power mode. The MSM8916 support receives some polishing touches, followed by introduction of the necessary pieces to use the DeviceTree on 32-bit variants of the MSM8916 platform, in particular to boot the secondary CPUs. Based on this support for the Samsung Galaxy S4 Mini Value Edition is introduced. The Asus Zenfone 2 Laser gained touchscreen, sensors and sdcard support. MSM8996 got support for the its crypto hardware and the Xiaomi Mi 5 gained a description of its LCD panel. The Trogdor device on SC7180 gained support for a second source eDP brigde, while SC7280 gains PCIe support and the newly introduced Herobrine device. Both MSM8916 and SDM845 has their standalong SMEM node dropped, in favour of the newly introduced support for specifying the compatible directly on the reserved-memory node. The SM7225 platform is introduced, as a derrivative of SM6350, initial support for the PM6350 PMIC and based on this the Fairphone 4 is introduced. The RB3 and RB5 devices gains msm-id and board-id, to allow the two DTBs to be baked into a single boot.img that can be booted on both devices. As the GDSC driver has been extended to properly describe the relationship between MMCX and MDSS_GDSC, the now deprecated mmcx regulator is removed from SM8250. SM8350 gained CPU topology, idle-states and fastrpc support. FastRPC was also added for SM8150 and the SA8155p ADP got a couple of remoteprocs enabled. Additionally a number of DT validation issues was corrected across the various platforms and devices. * tag 'qcom-arm64-for-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (77 commits) Revert "arm64: dts: qcom: msm8916-asus-z00l: Add sensors" arm64: dts: qcom: ipq6018: Remove unused 'iface_clk' property from dma-controller node arm64: dts: qcom: ipq6018: Remove unused 'qcom,config-pipe-trust-reg' property arm64: dts: qcom: sm8350: Add CPU topology and idle-states arm64: dts: qcom: Drop unneeded extra device-specific includes arm64: dts: qcom: msm8916: Drop standalone smem node arm64: dts: qcom: Fix node name of rpm-msg-ram device nodes arm64: dts: qcom: msm8916-asus-z00l: Add sensors arm64: dts: qcom: msm8916-asus-z00l: Add SDCard arm64: dts: qcom: msm8916-asus-z00l: Add touchscreen arm64: dts: qcom: sdm845-oneplus: remove devinfo-size from ramoops node arm64: dts: qcom: sdm845: Fix Qualcomm crypto engine bus clock arm64: dts: qcom: msm8996: Add device tree entries to support crypto engine arm64: dts: qcom: msm8996: move clock-frequency from PN547 NFC to I2C bus arm64: dts: qcom: msm8916-asus-z00l: Add sensors arm64: dts: qcom: sdm630: Add disabled Venus support arm64: dts: qcom: pm660l: Remove board-specific WLED configuration arm64: dts: qcom: Move WLED num-strings from pmi8994 to sony-xperia-tone arm64: dts: qcom: pmi8994: Remove hardcoded linear WLED enabled-strings arm64: dts: qcom: pmi8994: Fix "eternal"->"external" typo in WLED node ... Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-10-26Merge tag 'qcom-dts-for-5.16-2' of ↵Arnd Bergmann24-130/+91
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt Qualcomm DTS more changes for v5.16 The multi-purpose-pin (MPP) driver is finally migrated to use hierarchical IRQ domains, so this bring the associated changes. The remainder of the changes are correcting binding issues, primarily found through DT validation. * tag 'qcom-dts-for-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (26 commits) ARM: dts: qcom: fix typo in IPQ8064 thermal-sensor node ARM: dts: qcom: fix thermal zones naming ARM: dts: qcom: fix flash node naming for RB3011 ARM: dts: qcom: correct mmc node naming ARM: dts: qcom: fix memory and mdio nodes naming for RB3011 dt-bindings: arm: qcom: Fix Nexus 4 vendor prefix ARM: dts: ipq4019-ap.dk01.1-c1: add device compatible in the dts dt-bindings: arm: qcom-ipq4019: add missing device compatible ARM: dts: qcom: apq8026-lg-lenok: rename board vendor dt-bindings: arm: qcom: rename vendor of apq8026-lenok ARM: dts: qcom: sdx55: Drop '#clock-cells' from QMP PHY node ARM: dts: qcom: mdm9615: fix memory node for Sierra Wireless WP8548 ARM: dts: qcom-pma8084: add interrupt controller properties ARM: dts: qcom-pm8941: add interrupt controller properties ARM: dts: qcom-pm8841: add interrupt controller properties ARM: dts: qcom-msm8660: add interrupt controller properties ARM: dts: qcom-mdm9615: add interrupt controller properties ARM: dts: qcom-apq8064: add interrupt controller properties ARM: dts: qcom-apq8060-dragonboard: fix mpps state names ARM: dts: qcom-mdm9615: add gpio-ranges to mpps node, fix its name ... Link: https://lore.kernel.org/r/20211026135855.1205262-1-bjorn.andersson@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-10-26Merge tag 'samsung-dt-5.16-2' of ↵Arnd Bergmann16-0/+16
git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt Samsung DTS ARM changes for v5.16, part two Add chassis-type property. * tag 'samsung-dt-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: dts: s5pv210: add 'chassis-type' property ARM: dts: exynos: add 'chassis-type' property Link: https://lore.kernel.org/r/20211026094709.75692-3-krzysztof.kozlowski@canonical.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-10-26Merge tag 'at91-dt-5.16-2' of ↵Arnd Bergmann2-0/+39
git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/dt AT91 DT #2 for 5.16: - Add DT nodes for TCB and RTC blocks on SAMA7G5 - Add TCB0 for clocksource and clockevent functionality fallback only in case PIT64B will fail to probe and as a testbed for this feature on the Evaluation Kit. * tag 'at91-dt-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: dts: at91: sama7g5-ek: use blocks 0 and 1 of TCB0 as cs and ce ARM: dts: at91: sama7g5: add tcb nodes ARM: dts: at91: sama7g5: add rtc node Link: https://lore.kernel.org/r/20211025163428.26285-1-nicolas.ferre@microchip.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-10-26ARM: dts: arm: Update ICST clock nodes 'reg' and node namesRob Herring7-31/+68
Add a 'reg' entry for ICST clock nodes on the Arm Ltd platforms. The 'reg' entry is the VCO register address. With this, the node name can be updated to use a generic node name, 'clock-controller', and a unit-address. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/20211024232239.211822-1-linus.walleij@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-10-26ARM: dts: arm: Update register-bit-led nodes 'reg' and node namesRob Herring8-49/+125
Add a 'reg' entry for register-bit-led nodes on the Arm Ltd platforms. The 'reg' entry is the LED control register address. With this, the node name can be updated to use a generic node name, 'led', and a unit-address. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/20211024232003.211484-1-linus.walleij@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-10-26Merge tag 'qcom-drivers-for-5.16-2' of ↵Arnd Bergmann1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers More Qualcomm driver updates for v5.16 This introduces the Qualcomm "sleep stats" driver, which aids the efforts of bringing various Qualcomm platforms into low power mode. The SMP2P driver gains support for negotiating the "SSR" feature, which is used to better synchronize some corner cases that might appear as the remoteproc is recovering from a crash. The socinfo driver learns about a few new PMICs. SMEM is updated so that it's possible to put the compatible property directly in the reserved-memory node, to avoid having to have a separate node just pointing to the memory-region. Lastly it fixes some bugs in smp2p, apr, rpmhpd drivers, notably avoiding the issue where powering on a power-domain using rpmhpd while keeping the performance_state at 0 is a nop * tag 'qcom-drivers-for-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: firmware: qcom: scm: Don't break compile test on non-ARM platforms soc: qcom: smp2p: Add of_node_put() before goto soc: qcom: apr: Add of_node_put() before return soc: qcom: qcom_stats: Fix client votes offset soc: qcom: rpmhpd: fix sm8350_mxc's peer domain dt-bindings: arm: cpus: Document qcom,msm8916-smp enable-method ARM: qcom: Add qcom,msm8916-smp enable-method identical to MSM8226 firmware: qcom: scm: Add support for MC boot address API soc: qcom: spm: Add 8916 SPM register data dt-bindings: soc: qcom: spm: Document qcom,msm8916-saw2-v3.0-cpu soc: qcom: socinfo: Add PM8150C and SMB2351 models firmware: qcom_scm: Fix error retval in __qcom_scm_is_call_available() soc: qcom: smp2p: add feature negotiation and ssr ack feature support soc: qcom: Add Sleep stats driver dt-bindings: Introduce QCOM Sleep stats bindings soc: qcom: socinfo: add two missing PMIC IDs soc: qcom: rpmhpd: Make power_on actually enable the domain soc: qcom: smem: Support reserved-memory description dt-bindings: soc: smem: Make indirection optional dt-bindings: sram: Document qcom,rpm-msg-ram Link: https://lore.kernel.org/r/20211026140706.1205989-1-bjorn.andersson@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-10-26Merge tag 'samsung-drivers-5.16' of ↵Arnd Bergmann3-4/+0
git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/drivers Samsung SoC drivers changes for v5.16 1. Convert Exynos ChipID and ASV driver to a module and make it a default, instead of selected. The driver is not essential, so it could be disabled, if needed. 2. Add support for Exynos850 and Exynos Auto v9 to Exynos ChipID and ASV driver. 3. Get rid of HAVE_S3C_RTC because it was adding just another layer instead of direct dependencies. 4. Minor cleanups. * tag 'samsung-drivers-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: soc: samsung: exynos-chipid: add exynosautov9 SoC support rtc: s3c: remove HAVE_S3C_RTC in favor of direct dependencies soc: samsung: exynos-chipid: Add Exynos850 support dt-bindings: samsung: exynos-chipid: Document Exynos850 compatible soc: samsung: exynos-chipid: Pass revision reg offsets soc: samsung: pm_domains: drop unused is_off field arm64: exynos: don't have ARCH_EXYNOS select EXYNOS_CHIPID soc: samsung: exynos-chipid: do not enforce built-in soc: samsung: exynos-chipid: convert to a module soc: samsung: exynos-chipid: avoid soc_device_to_device() soc: samsung: exynos-pmu: Fix compilation when nothing selects CONFIG_MFD_CORE Link: https://lore.kernel.org/r/20211026094709.75692-2-krzysztof.kozlowski@canonical.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-10-26Merge tag 'samsung-soc-5.16' of ↵Arnd Bergmann2-5/+19
git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/soc Samsung mach/soc changes for v5.16 A minor fix for theoretical issue when handling IRQ setup code errors in S3C24xx and a cleanup for S3C64xx. * tag 'samsung-soc-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: s3c: Use strscpy to replace strlcpy ARM: s3c: irq-s3c24xx: Fix return value check for s3c24xx_init_intc() Link: https://lore.kernel.org/r/20211026094709.75692-5-krzysztof.kozlowski@canonical.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-10-26irq: remove handle_domain_{irq,nmi}()Mark Rutland5-5/+4
Now that entry code handles IRQ entry (including setting the IRQ regs) before calling irqchip code, irqchip code can safely call generic_handle_domain_irq(), and there's no functional reason for it to call handle_domain_irq(). Let's cement this split of responsibility and remove handle_domain_irq() entirely, updating irqchip drivers to call generic_handle_domain_irq(). For consistency, handle_domain_nmi() is similarly removed and replaced with a generic_handle_domain_nmi() function which also does not perform any entry logic. Previously handle_domain_{irq,nmi}() had a WARN_ON() which would fire when they were called in an inappropriate context. So that we can identify similar issues going forward, similar WARN_ON_ONCE() logic is added to the generic_handle_*() functions, and comments are updated for clarity and consistency. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Marc Zyngier <maz@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de>
2021-10-25Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds8-6/+17
Pull ARM fixes from Russell King: - Fix clang-related relocation warning in futex code - Fix incorrect use of get_kernel_nofault() - Fix bad code generation in __get_user_check() when kasan is enabled - Ensure TLB function table is correctly aligned - Remove duplicated string function definitions in decompressor - Fix link-time orphan section warnings - Fix old-style function prototype for arch_init_kprobes() - Only warn about XIP address when not compile testing - Handle BE32 big endian for keystone2 remapping * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 9148/1: handle CONFIG_CPU_ENDIAN_BE32 in arch/arm/kernel/head.S ARM: 9141/1: only warn about XIP address when not compile testing ARM: 9139/1: kprobes: fix arch_init_kprobes() prototype ARM: 9138/1: fix link warning with XIP + frame-pointer ARM: 9134/1: remove duplicate memcpy() definition ARM: 9133/1: mm: proc-macros: ensure *_tlb_fns are 4B aligned ARM: 9132/1: Fix __get_user_check failure with ARM KASAN images ARM: 9125/1: fix incorrect use of get_kernel_nofault() ARM: 9122/1: select HAVE_FUTEX_CMPXCHG
2021-10-25ARM: 9147/1: add printf format attribute to early_print()Nicolas Iooss1-1/+1
Adding such an attribute is helpful to detect errors related to printf formats at compile-time. Link: https://lore.kernel.org/r/20160828165815.25647-1-nicolas.iooss_linux@m4x.org Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2021-10-25ARM: 9146/1: RiscPC needs older gcc versionArnd Bergmann1-0/+1
Attempting to build mach-rpc with gcc-9 or higher, or with any version of clang results in a build failure, like: arm-linux-gnueabi-gcc-11.1.0: error: unrecognized -march target: armv3m arm-linux-gnueabi-gcc-11.1.0: note: valid arguments are: armv4 armv4t armv5t armv5te armv5tej armv6 armv6j armv6k armv6z armv6kz armv6zk armv6t2 armv6-m armv6s-m armv7 armv7-a armv7ve armv7-r armv7-m armv7e-m armv8-a armv8.1-a armv8.2-a armv8.3-a armv8.4-a armv8.5-a armv8.6-a armv8-m.base armv8-m.main armv8-r armv8.1-m.main iwmmxt iwmmxt2; did you mean 'armv4'? Building with gcc-5 also fails in at least one of these ways: /tmp/cczZoCcv.s:68: Error: selected processor does not support `bx lr' in ARM mode drivers/tty/vt/vt_ioctl.c:958:1: internal compiler error: Segmentation fault Handle this in Kconfig so we don't run into this with randconfig builds, allowing only gcc-6 through gcc-8. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>

Privacy Policy