aboutsummaryrefslogtreecommitdiffstats
path: root/arch/s390/include
AgeCommit message (Collapse)AuthorFilesLines
2019-03-17kbuild: warn redundant generic-yMasahiro Yamada2-2/+0
The generic-y is redundant under the following condition: - arch has its own implementation - the same header is added to generated-y - the same header is added to mandatory-y If a redundant generic-y is found, the warning like follows is displayed: scripts/Makefile.asm-generic:20: redundant generic-y found in arch/arm/include/asm/Kbuild: timex.h I fixed up arch Kbuild files found by this. Suggested-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-03-06Merge branch 'akpm' (patches from Andrew)Linus Torvalds1-2/+3
Merge misc updates from Andrew Morton: - a few misc things - ocfs2 updates - most of MM * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (159 commits) tools/testing/selftests/proc/proc-self-syscall.c: remove duplicate include proc: more robust bulk read test proc: test /proc/*/maps, smaps, smaps_rollup, statm proc: use seq_puts() everywhere proc: read kernel cpu stat pointer once proc: remove unused argument in proc_pid_lookup() fs/proc/thread_self.c: code cleanup for proc_setup_thread_self() fs/proc/self.c: code cleanup for proc_setup_self() proc: return exit code 4 for skipped tests mm,mremap: bail out earlier in mremap_to under map pressure mm/sparse: fix a bad comparison mm/memory.c: do_fault: avoid usage of stale vm_area_struct writeback: fix inode cgroup switching comment mm/huge_memory.c: fix "orig_pud" set but not used mm/hotplug: fix an imbalance with DEBUG_PAGEALLOC mm/memcontrol.c: fix bad line in comment mm/cma.c: cma_declare_contiguous: correct err handling mm/page_ext.c: fix an imbalance with kmemleak mm/compaction: pass pgdat to too_many_isolated() instead of zone mm: remove zone_lru_lock() function, access ->lru_lock directly ...
2019-03-06mm: update ptep_modify_prot_commit to take old pte value as argAneesh Kumar K.V1-1/+2
Architectures like ppc64 require to do a conditional tlb flush based on the old and new value of pte. Enable that by passing old pte value as the arg. Link: http://lkml.kernel.org/r/20190116085035.29729-3-aneesh.kumar@linux.ibm.com Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-06mm: update ptep_modify_prot_start/commit to take vm_area_struct as argAneesh Kumar K.V1-2/+2
Patch series "NestMMU pte upgrade workaround for mprotect", v5. We can upgrade pte access (R -> RW transition) via mprotect. We need to make sure we follow the recommended pte update sequence as outlined in commit bd5050e38aec ("powerpc/mm/radix: Change pte relax sequence to handle nest MMU hang") for such updates. This patch series does that. This patch (of 5): Some architectures may want to call flush_tlb_range from these helpers. Link: http://lkml.kernel.org/r/20190116085035.29729-2-aneesh.kumar@linux.ibm.com Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-05Merge branch 'timers-2038-for-linus' of ↵Linus Torvalds1-6/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull year 2038 updates from Thomas Gleixner: "Another round of changes to make the kernel ready for 2038. After lots of preparatory work this is the first set of syscalls which are 2038 safe: 403 clock_gettime64 404 clock_settime64 405 clock_adjtime64 406 clock_getres_time64 407 clock_nanosleep_time64 408 timer_gettime64 409 timer_settime64 410 timerfd_gettime64 411 timerfd_settime64 412 utimensat_time64 413 pselect6_time64 414 ppoll_time64 416 io_pgetevents_time64 417 recvmmsg_time64 418 mq_timedsend_time64 419 mq_timedreceiv_time64 420 semtimedop_time64 421 rt_sigtimedwait_time64 422 futex_time64 423 sched_rr_get_interval_time64 The syscall numbers are identical all over the architectures" * 'timers-2038-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits) riscv: Use latest system call ABI checksyscalls: fix up mq_timedreceive and stat exceptions unicore32: Fix __ARCH_WANT_STAT64 definition asm-generic: Make time32 syscall numbers optional asm-generic: Drop getrlimit and setrlimit syscalls from default list 32-bit userspace ABI: introduce ARCH_32BIT_OFF_T config option compat ABI: use non-compat openat and open_by_handle_at variants y2038: add 64-bit time_t syscalls to all 32-bit architectures y2038: rename old time and utime syscalls y2038: remove struct definition redirects y2038: use time32 syscall names on 32-bit syscalls: remove obsolete __IGNORE_ macros y2038: syscalls: rename y2038 compat syscalls x86/x32: use time64 versions of sigtimedwait and recvmmsg timex: change syscalls to use struct __kernel_timex timex: use __kernel_timex internally sparc64: add custom adjtimex/clock_adjtime functions time: fix sys_timer_settime prototype time: Add struct __kernel_timex time: make adjtime compat handling available for 32 bit ...
2019-03-05Merge tag 's390-5.1-1' of ↵Linus Torvalds14-22/+380
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Martin Schwidefsky: - A copy of Arnds compat wrapper generation series - Pass information about the KVM guest to the host in form the control program code and the control program version code - Map IOV resources to support PCI physical functions on s390 - Add vector load and store alignment hints to improve performance - Use the "jdd" constraint with gcc 9 to make jump labels working again - Remove amode workaround for old z/VM releases from the DCSS code - Add support for in-kernel performance measurements using the CPU measurement counter facility - Introduce a new PMU device cpum_cf_diag to capture counters and store thenn as event raw data. - Bug fixes and cleanups * tag 's390-5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (54 commits) Revert "s390/cpum_cf: Add kernel message exaplanations" s390/dasd: fix read device characteristic with CONFIG_VMAP_STACK=y s390/suspend: fix prefix register reset in swsusp_arch_resume s390: warn about clearing als implied facilities s390: allow overriding facilities via command line s390: clean up redundant facilities list setup s390/als: remove duplicated in-place implementation of stfle s390/cio: Use cpa range elsewhere within vfio-ccw s390/cio: Fix vfio-ccw handling of recursive TICs s390: vfio_ap: link the vfio_ap devices to the vfio_ap bus subsystem s390/cpum_cf: Handle EBUSY return code from CPU counter facility reservation s390/cpum_cf: Add kernel message exaplanations s390/cpum_cf_diag: Add support for s390 counter facility diagnostic trace s390/cpum_cf: add ctr_stcctm() function s390/cpum_cf: move common functions into a separate file s390/cpum_cf: introduce kernel_cpumcf_avail() function s390/cpu_mf: replace stcctm5() with the stcctm() function s390/cpu_mf: add store cpu counter multiple instruction support s390/cpum_cf: Add minimal in-kernel interface for counter measurements s390/cpum_cf: introduce kernel_cpumcf_alert() to obtain measurement alerts ...
2019-03-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds3-125/+1
Pull networking updates from David Miller: "Here we go, another merge window full of networking and #ebpf changes: 1) Snoop DHCPACKS in batman-adv to learn MAC/IP pairs in the DHCP range without dealing with floods of ARP traffic, from Linus Lüssing. 2) Throttle buffered multicast packet transmission in mt76, from Felix Fietkau. 3) Support adaptive interrupt moderation in ice, from Brett Creeley. 4) A lot of struct_size conversions, from Gustavo A. R. Silva. 5) Add peek/push/pop commands to bpftool, as well as bash completion, from Stanislav Fomichev. 6) Optimize sk_msg_clone(), from Vakul Garg. 7) Add SO_BINDTOIFINDEX, from David Herrmann. 8) Be more conservative with local resends due to local congestion, from Yuchung Cheng. 9) Allow vetoing of unsupported VXLAN FDBs, from Petr Machata. 10) Add health buffer support to devlink, from Eran Ben Elisha. 11) Add TXQ scheduling API to mac80211, from Toke Høiland-Jørgensen. 12) Add statistics to basic packet scheduler filter, from Cong Wang. 13) Add GRE tunnel support for mlxsw Spectrum-2, from Nir Dotan. 14) Lots of new IP tunneling forwarding tests, also from Nir Dotan. 15) Add 3ad stats to bonding, from Nikolay Aleksandrov. 16) Lots of probing improvements for bpftool, from Quentin Monnet. 17) Various nfp drive #ebpf JIT improvements from Jakub Kicinski. 18) Allow #ebpf programs to access gso_segs from skb shared info, from Eric Dumazet. 19) Add sock_diag support for AF_XDP sockets, from Björn Töpel. 20) Support 22260 iwlwifi devices, from Luca Coelho. 21) Use rbtree for ipv6 defragmentation, from Peter Oskolkov. 22) Add JMP32 instruction class support to #ebpf, from Jiong Wang. 23) Add spinlock support to #ebpf, from Alexei Starovoitov. 24) Support 256-bit keys and TLS 1.3 in ktls, from Dave Watson. 25) Add device infomation API to devlink, from Jakub Kicinski. 26) Add new timestamping socket options which are y2038 safe, from Deepa Dinamani. 27) Add RX checksum offloading for various sh_eth chips, from Sergei Shtylyov. 28) Flow offload infrastructure, from Pablo Neira Ayuso. 29) Numerous cleanups, improvements, and bug fixes to the PHY layer and many drivers from Heiner Kallweit. 30) Lots of changes to try and make packet scheduler classifiers run lockless as much as possible, from Vlad Buslov. 31) Support BCM957504 chip in bnxt_en driver, from Erik Burrows. 32) Add concurrency tests to tc-tests infrastructure, from Vlad Buslov. 33) Add hwmon support to aquantia, from Heiner Kallweit. 34) Allow 64-bit values for SO_MAX_PACING_RATE, from Eric Dumazet. And I would be remiss if I didn't thank the various major networking subsystem maintainers for integrating much of this work before I even saw it. Alexei Starovoitov, Daniel Borkmann, Pablo Neira Ayuso, Johannes Berg, Kalle Valo, and many others. Thank you!" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2207 commits) net/sched: avoid unused-label warning net: ignore sysctl_devconf_inherit_init_net without SYSCTL phy: mdio-mux: fix Kconfig dependencies net: phy: use phy_modify_mmd_changed in genphy_c45_an_config_aneg net: dsa: mv88e6xxx: add call to mv88e6xxx_ports_cmode_init to probe for new DSA framework selftest/net: Remove duplicate header sky2: Disable MSI on Dell Inspiron 1545 and Gateway P-79 net/mlx5e: Update tx reporter status in case channels were successfully opened devlink: Add support for direct reporter health state update devlink: Update reporter state to error even if recover aborted sctp: call iov_iter_revert() after sending ABORT team: Free BPF filter when unregistering netdev ip6mr: Do not call __IP6_INC_STATS() from preemptible context isdn: mISDN: Fix potential NULL pointer dereference of kzalloc net: dsa: mv88e6xxx: support in-band signalling on SGMII ports with external PHYs cxgb4/chtls: Prefix adapter flags with CXGB4 net-sysfs: Switch to bitmap_zalloc() mellanox: Switch to bitmap_zalloc() bpf: add test cases for non-pointer sanitiation logic mlxsw: i2c: Extend initialization by querying resources data ...
2019-03-04get rid of legacy 'get_ds()' functionLinus Torvalds1-1/+0
Every in-kernel use of this function defined it to KERNEL_DS (either as an actual define, or as an inline function). It's an entirely historical artifact, and long long long ago used to actually read the segment selector valueof '%ds' on x86. Which in the kernel is always KERNEL_DS. Inspired by a patch from Jann Horn that just did this for a very small subset of users (the ones in fs/), along with Al who suggested a script. I then just took it to the logical extreme and removed all the remaining gunk. Roughly scripted with git grep -l '(get_ds())' -- :^tools/ | xargs sed -i 's/(get_ds())/(KERNEL_DS)/' git grep -lw 'get_ds' -- :^tools/ | xargs sed -i '/^#define get_ds()/d' plus manual fixups to remove a few unusual usage patterns, the couple of inline function cases and to fix up a comment that had become stale. The 'get_ds()' function remains in an x86 kvm selftest, since in user space it actually does something relevant. Inspired-by: Jann Horn <jannh@google.com> Inspired-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-02-22s390/cpum_cf_diag: Add support for s390 counter facility diagnostic traceThomas Richter2-0/+27
Introduce a PMU device named cpum_cf_diag. It extracts the values of all counters in all authorized counter sets and stores them as event raw data. This is done with the STORE CPU COUNTER MULTIPLE instruction to speed up access. All counter sets fit into one buffer. The values of each counter are taken when the event is started on the performance sub-system and when the event is stopped. This results in counter values available at the start and at the end of the measurement time frame. The difference is calculated for each counter. The differences of all counters are then saved as event raw data in the perf.data file. The counter values are accompanied by the time stamps when the counter set was started and when the counter set was stopped. This data is part of a trailer entry which describes the time frame, counter set version numbers, CPU speed, and machine type for later analysis. Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-02-22s390/cpum_cf: add ctr_stcctm() functionHendrik Brueckner1-0/+19
Introduce the ctr_stcctm() function as wrapper function to extract counters from a particular counter set. Note that the counter set is part of the stcctm instruction opcode, few indirections are necessary to specify the counter set as variable. Signed-off-by: Hendrik Brueckner <brueckner@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-02-22s390/cpum_cf: introduce kernel_cpumcf_avail() functionHendrik Brueckner1-0/+1
A preparation to move out common CPU-MF counter facility support functions, first introduce a function that indicates whether the support is ready to use. Signed-off-by: Hendrik Brueckner <brueckner@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-02-22s390/cpu_mf: replace stcctm5() with the stcctm() functionHendrik Brueckner1-16/+9
Remove the stcctm5() function to extract counters from the MT-diagnostic counter set with the stcctm() function. For readability, introduce an enum to map the counter sets names to respective numbers for the stcctm instruction. Signed-off-by: Hendrik Brueckner <brueckner@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-02-22s390/cpu_mf: add store cpu counter multiple instruction supportHendrik Brueckner2-0/+39
Add support for the STORE CPU COUNTER MULTIPLE instruction to extract a range of counters from a counter set. An assembler macro is used to create the instruction opcode because the counter set identifier is part of the instruction and, thus, cannot be easily specified as parameter. Signed-off-by: Hendrik Brueckner <brueckner@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-02-22s390/cpum_cf: Add minimal in-kernel interface for counter measurementsHendrik Brueckner1-0/+14
Introduce a minimal interface for doing counter measurements of small units of work within the kernel. Use the kernel_cpumcf_begin() function start a measurement session and, later, stop it with kernel_cpumcf_end(). During the measreument session, you can enable and start/stop counter sets by using ctr_set_* functions. To make these changes effective use the lcctl() function. You can then use the ecctr() function to extract counters from the different counter sets. Please note that you have to check whether the counter sets to be enabled are authorized. Note that when a measurement session is active, other users cannot perform counter measurements. In such cases, kernel_cpumcf_begin() indicates this with returning -EBUSY. If the counter facility is not available, kernel_cpumcf_begin() returns -ENODEV. Note that this interface is restricted to the current CPU and, thus, preemption must be turned off. Example: u32 state, err; u64 cycles, insn; err = kernel_cpumcf_begin(); if (err) goto out_busy; state = 0; ctr_set_enable(&state, CPUMF_CTR_SET_BASIC); ctr_set_start(&state, CPUMF_CTR_SET_BASIC); err = lcctl(state); if (err) goto ; /* ... do your work ... */ ctr_set_stop(&state, CPUMF_CTR_SET_BASIC); err = lcctl(state); if (err) goto out; cycles = insn = 0; ecctr(0, &cycles); ecctr(1, &insn); /* ... */ kernel_cpumcf_end(); out_busy: Signed-off-by: Hendrik Brueckner <brueckner@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-02-22s390/cpum_cf: introduce kernel_cpumcf_alert() to obtain measurement alertsHendrik Brueckner1-0/+2
During a __kernel_cpumcf_begin()/end() session, save measurement alerts for the counter facility in the per-CPU cpu_cf_events variable. Users can obtain and, optionally, clear the alerts by calling kernel_cpumcf_alert() to specifically handle alerts. Signed-off-by: Hendrik Brueckner <brueckner@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-02-22s390/cpu_mf: move struct cpu_cf_events and per-CPU variable to header fileHendrik Brueckner1-0/+9
Make the struct cpu_cf_events and the respective per-CPU variable available to in-kernel users. Access to this per-CPU variable shall be done between the calls to __kernel_cpumcf_begin() and __kernel_cpumcf_end(). Signed-off-by: Hendrik Brueckner <brueckner@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-02-22s390/cpum_cf: prepare for in-kernel counter measurementsHendrik Brueckner1-0/+3
Prepare the counter facility support to be used by other in-kernel users. The first step introduces the __kernel_cpumcf_begin() and __kernel_cpumcf_end() functions to reserve the counter facility for doing measurements and to release after the measurements are done. Signed-off-by: Hendrik Brueckner <brueckner@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-02-22s390/cpum_cf: move counter set controls to a new header fileHendrik Brueckner2-1/+52
Move counter set specific controls and functions to the asm/cpu_mcf.h header file containg all counter facility support definitions. Also adapt few variable names and header file includes. No functional changes. Signed-off-by: Hendrik Brueckner <brueckner@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-02-20s390/jump_label: Use "jdd" constraint on gcc9Ilya Leoshkevich1-4/+10
[heiko.carstens@de.ibm.com]: ----- Laura Abbott reported that the kernel doesn't build anymore with gcc 9, due to the "X" constraint. Ilya provided the gcc 9 patch "S/390: Introduce jdd constraint" which introduces the new "jdd" constraint which fixes this. ----- The support for section anchors on S/390 introduced in gcc9 has changed the behavior of "X" constraint, which can now produce register references. Since existing constraints, in particular, "i", do not fit the intended use case on S/390, the new machine-specific "jdd" constraint was introduced. This patch makes jump labels use "jdd" constraint when building with gcc9. Reported-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-02-10Merge tag 'y2038-new-syscalls' of ↵Thomas Gleixner1-1/+1
git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground into timers/2038 Pull y2038 - time64 system calls from Arnd Bergmann: This series finally gets us to the point of having system calls with 64-bit time_t on all architectures, after a long time of incremental preparation patches. There was actually one conversion that I missed during the summer, i.e. Deepa's timex series, which I now updated based the 5.0-rc1 changes and review comments. The following system calls are now added on all 32-bit architectures using the same system call numbers: 403 clock_gettime64 404 clock_settime64 405 clock_adjtime64 406 clock_getres_time64 407 clock_nanosleep_time64 408 timer_gettime64 409 timer_settime64 410 timerfd_gettime64 411 timerfd_settime64 412 utimensat_time64 413 pselect6_time64 414 ppoll_time64 416 io_pgetevents_time64 417 recvmmsg_time64 418 mq_timedsend_time64 419 mq_timedreceiv_time64 420 semtimedop_time64 421 rt_sigtimedwait_time64 422 futex_time64 423 sched_rr_get_interval_time64 Each one of these corresponds directly to an existing system call that includes a 'struct timespec' argument, or a structure containing a timespec or (in case of clock_adjtime) timeval. Not included here are new versions of getitimer/setitimer and getrusage/waitid, which are planned for the future but only needed to make a consistent API rather than for correct operation beyond y2038. These four system calls are based on 'timeval', and it has not been finally decided what the replacement kernel interface will use instead. So far, I have done a lot of build testing across most architectures, which has found a number of bugs. Runtime testing so far included testing LTP on 32-bit ARM with the existing system calls, to ensure we do not regress for existing binaries, and a test with a 32-bit x86 build of LTP against a modified version of the musl C library that has been adapted to the new system call interface [3]. This library can be used for testing on all architectures supported by musl-1.1.21, but it is not how the support is getting integrated into the official musl release. Official musl support is planned but will require more invasive changes to the library. Link: https://lore.kernel.org/lkml/20190110162435.309262-1-arnd@arndb.de/T/ Link: https://lore.kernel.org/lkml/20190118161835.2259170-1-arnd@arndb.de/ Link: https://git.linaro.org/people/arnd/musl-y2038.git/ [2]
2019-02-10Merge tag 'y2038-syscall-cleanup' of ↵Thomas Gleixner3-5/+141
git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground into timers/2038 Pull preparatory work for y2038 changes from Arnd Bergmann: System call unification and cleanup The system call tables have diverged a bit over the years, and a number of the recent additions never made it into all architectures, for one reason or another. This is an attempt to clean it up as far as we can without breaking compatibility, doing a number of steps: - Add system calls that have not yet been integrated into all architectures but that we definitely want there. This includes {,f}statfs64() and get{eg,eu,g,p,u,pp}id() on alpha, which have been missing traditionally. - The s390 compat syscall handling is cleaned up to be more like what we do on other architectures, while keeping the 31-bit pointer extension. This was merged as a shared branch by the s390 maintainers and is included here in order to base the other patches on top. - Add the separate ipc syscalls on all architectures that traditionally only had sys_ipc(). This version is done without support for IPC_OLD that is we have in sys_ipc. The new semtimedop_time64 syscall will only be added here, not in sys_ipc - Add syscall numbers for a couple of syscalls that we probably don't need everywhere, in particular pkey_* and rseq, for the purpose of symmetry: if it's in asm-generic/unistd.h, it makes sense to have it everywhere. I expect that any future system calls will get assigned on all platforms together, even when they appear to be specific to a single architecture. - Prepare for having the same system call numbers for any future calls. In combination with the generated tables, this hopefully makes it easier to add new calls across all architectures together. All of the above are technically separate from the y2038 work, but are done as preparation before we add the new 64-bit time_t system calls everywhere, providing a common baseline set of system calls. I expect that glibc and other libraries that want to use 64-bit time_t will require linux-5.1 kernel headers for building in the future, and at a much later point may also require linux-5.1 or a later version as the minimum kernel at runtime. Having a common baseline then allows the removal of many architecture or kernel version specific workarounds.
2019-02-08s390/net: move pnet constantsUrsula Braun1-8/+0
There is no need to define these PNETID related constants in the pnet.h file, since they are just used locally within pnet.c. Just code cleanup, no functional change. Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-07s390: add alignment hints to vector load and storeMartin Schwidefsky1-4/+4
The z14 introduced alignment hints to increase the performance of vector loads and stores. The kernel uses an implicit alignmenet of 8 bytes for the vector registers, set the alignment hint to 3. Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-02-07s390/qdio: make SBAL address array type-safeJulian Wiedmann1-2/+2
There is no need to use void pointers, all drivers are in agreement about the underlying data structure of the SBAL arrays. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-02-06y2038: rename old time and utime syscallsArnd Bergmann1-1/+1
The time, stime, utime, utimes, and futimesat system calls are only used on older architectures, and we do not provide y2038 safe variants of them, as they are replaced by clock_gettime64, clock_settime64, and utimensat_time64. However, for consistency it seems better to have the 32-bit architectures that still use them call the "time32" entry points (leaving the traditional handlers for the 64-bit architectures), like we do for system calls that now require two versions. Note: We used to always define __ARCH_WANT_SYS_TIME and __ARCH_WANT_SYS_UTIME and only set __ARCH_WANT_COMPAT_SYS_TIME and __ARCH_WANT_SYS_UTIME32 for compat mode on 64-bit kernels. Now this is reversed: only 64-bit architectures set __ARCH_WANT_SYS_TIME/UTIME, while we need __ARCH_WANT_SYS_TIME32/UTIME32 for 32-bit architectures and compat mode. The resulting asm/unistd.h changes look a bit counterintuitive. This is only a cleanup patch and it should not change any behavior. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2019-02-06syscalls: remove obsolete __IGNORE_ macrosArnd Bergmann1-2/+0
These are all for ignoring the lack of obsolete system calls, which have been marked the same way in scripts/checksyscall.sh, so these can be removed. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2019-02-03arch: Use asm-generic/socket.h when possibleDeepa Dinamani2-119/+1
Many architectures maintain an arch specific copy of the file even though there are no differences with the asm-generic one. Allow these architectures to use the generic one instead. Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Acked-by: Max Filippov <jcmvbkbc@gmail.com> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Acked-by: Willem de Bruijn <willemb@google.com> Cc: chris@zankel.net Cc: fenghua.yu@intel.com Cc: tglx@linutronix.de Cc: schwidefsky@de.ibm.com Cc: linux-ia64@vger.kernel.org Cc: linux-xtensa@linux-xtensa.org Cc: linux-s390@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-28s390: pci: no need to check return value of debugfs_create functionsGreg Kroah-Hartman1-1/+0
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Sebastian Ott <sebott@linux.ibm.com> Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com> Cc: linux-s390@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sebastian Ott <sebott@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-01-28s390/setup: set control program code via diag 318Collin Walling2-0/+13
The s390x diagnose 318 instruction sets the control program name code (CPNC) and control program version code (CPVC) to provide useful information regarding the OS during debugging. The CPNC is explicitly set to 4 to indicate a Linux/KVM environment. The CPVC is a 7-byte value containing: - 3-byte Linux version code, currently set to 0 - 3-byte unique value, currently set to 0 - 1-byte trailing null Signed-off-by: Collin Walling <walling@linux.ibm.com> Acked-by: Janosch Frank <frankja@linux.ibm.com> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <1544135405-22385-2-git-send-email-walling@linux.ibm.com> [set version code to 0 until the structure is fully defined] Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-01-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-4/+3
2019-01-25arch: add pkey and rseq syscall numbers everywhereArnd Bergmann1-3/+0
Most architectures define system call numbers for the rseq and pkey system calls, even when they don't support the features, and perhaps never will. Only a few architectures are missing these, so just define them anyway for consistency. If we decide to add them later to one of these, the system call numbers won't get out of sync then. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
2019-01-23Merge branch 'compat' of ↵Martin Schwidefsky3-0/+166
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux into features Pull tip branch with Arnds compat system call wrapper rework.
2019-01-23s390: fix system call tracingHeiko Carstens1-0/+25
When converting to autogenerated compat syscall wrappers all system call entry points got a different symbol name: they all got a __s390x_ prefix. This caused breakage with system call tracing, since an appropriate arch_syscall_match_sym_name() was not provided. Add this function, and while at it also add code to avoid compat system call tracing. s390 has different system call tables for native 64 bit system calls and compat system calls. This isn't really supported in the common code. However there are hardly any compat binaries left, therefore just ignore compat system calls, like x86 and arm64 also do for the same reason. Fixes: aa0d6e70d3b3 ("s390: autogenerate compat syscall wrappers") Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-01-18s390/kasan: improve string/memory functions checksVasily Gorbik1-6/+22
Avoid using arch specific implementations of string/memory functions with KASAN since gcc cannot instrument asm code memory accesses and many bugs could be missed. Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-01-18s390: autogenerate compat syscall wrappersArnd Bergmann1-0/+135
Any system call that takes a pointer argument on s390 requires a wrapper function to do a 31-to-64 zero-extension, these are currently generated in arch/s390/kernel/compat_wrapper.c. On arm64 and x86, we already generate similar wrappers for all system calls in the place of their definition, just for a different purpose (they load the arguments from pt_regs). We can do the same thing here, by adding an asm/syscall_wrapper.h file with a copy of all the relevant macros to override the generic version. Besides the addition of the compat entry point, these also rename the entry points with a __s390_ or __s390x_ prefix, similar to what we do on arm64 and x86. This in turn requires renaming a few things, and adding a proper ni_syscall() entry point. In order to still compile system call definitions that pass an loff_t argument, the __SC_COMPAT_CAST() macro checks for that and forces an -ENOSYS error, which was the best I could come up with. Those functions must obviously not get called from user space, but instead require hand-written compat_sys_*() handlers, which fortunately already exist. Link: https://lore.kernel.org/lkml/20190116131527.2071570-5-arnd@arndb.de Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> [heiko.carstens@de.ibm.com: compile fix for !CONFIG_COMPAT] Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-01-18s390: use generic UID16 implementationArnd Bergmann1-0/+6
s390 has an almost identical copy of the code in kernel/uid16.c. The problem here is that it requires calling the regular system calls, which the generic implementation handles correctly, but the internal interfaces are not declared in a global header for this. The best way forward here seems to be to just use the generic code and delete the s390 specific implementation. I keep the changes to uapi/asm/posix_types.h inside of an #ifdef check so user space does not observe any changes. As some of the system calls pass pointers, we also need wrappers in compat_wrapper.c, which I add for all calls with at least one argument. All those wrappers can be removed in a later step. Link: https://lore.kernel.org/lkml/20190116131527.2071570-4-arnd@arndb.de Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-01-17net: introduce SO_BINDTOIFINDEX sockoptDavid Herrmann1-0/+2
This introduces a new generic SOL_SOCKET-level socket option called SO_BINDTOIFINDEX. It behaves similar to SO_BINDTODEVICE, but takes a network interface index as argument, rather than the network interface name. User-space often refers to network-interfaces via their index, but has to temporarily resolve it to a name for a call into SO_BINDTODEVICE. This might pose problems when the network-device is renamed asynchronously by other parts of the system. When this happens, the SO_BINDTODEVICE might either fail, or worse, it might bind to the wrong device. In most cases user-space only ever operates on devices which they either manage themselves, or otherwise have a guarantee that the device name will not change (e.g., devices that are UP cannot be renamed). However, particularly in libraries this guarantee is non-obvious and it would be nice if that race-condition would simply not exist. It would make it easier for those libraries to operate even in situations where the device-name might change under the hood. A real use-case that we recently hit is trying to start the network stack early in the initrd but make it survive into the real system. Existing distributions rename network-interfaces during the transition from initrd into the real system. This, obviously, cannot affect devices that are up and running (unless you also consider moving them between network-namespaces). However, the network manager now has to make sure its management engine for dormant devices will not run in parallel to these renames. Particularly, when you offload operations like DHCP into separate processes, these might setup their sockets early, and thus have to resolve the device-name possibly running into this race-condition. By avoiding a call to resolve the device-name, we no longer depend on the name and can run network setup of dormant devices in parallel to the transition off the initrd. The SO_BINDTOIFINDEX ioctl plugs this race. Reviewed-by: Tom Gundersen <teg@jklm.no> Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-11s390/vdso: correct vdso mapping for compat tasksVasily Gorbik1-1/+1
While "s390/vdso: avoid 64-bit vdso mapping for compat tasks" fixed 64-bit vdso mapping for compat tasks under gdb it introduced another problem. "compat_mm" flag is not inherited during fork and when 31-bit process forks a child (but does not perform exec) it ends up with 64-bit vdso. To address that, init_new_context (which is called during fork and exec) now initialize compat_mm based on thread TIF_31BIT flag. Later compat_mm is adjusted in arch_setup_additional_pages, which is called during exec. Fixes: d1befa65823e ("s390/vdso: avoid 64-bit vdso mapping for compat tasks") Reported-by: Stefan Liebler <stli@linux.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: <stable@vger.kernel.org> # v4.20+ Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-01-11s390/mm: always force a load of the primary ASCE on context switchMartin Schwidefsky1-3/+2
The ASCE of an mm_struct can be modified after a task has been created, e.g. via crst_table_downgrade for a compat process. The active_mm logic to avoid the switch_mm call if the next task is a kernel thread can lead to a situation where switch_mm is called where 'prev == next' is true but 'prev->context.asce == next->context.asce' is not. This can lead to a situation where a CPU uses the outdated ASCE to run a task. The result can be a crash, endless loops and really subtle problem due to TLBs being created with an invalid ASCE. Cc: stable@kernel.org # v3.15+ Fixes: 53e857f30867 ("s390/mm,tlb: race of lazy TLB flush vs. recreation") Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-01-06arch: remove redundant UAPI generic-y definesMasahiro Yamada1-15/+0
Now that Kbuild automatically creates asm-generic wrappers for missing mandatory headers, it is redundant to list the same headers in generic-y and mandatory-y. Suggested-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Sam Ravnborg <sam@ravnborg.org>
2019-01-06arch: remove stale comments "UAPI Header export list"Masahiro Yamada1-1/+0
These comments are leftovers of commit fcc8487d477a ("uapi: export all headers under uapi directories"). Prior to that commit, exported headers must be explicitly added to header-y. Now, all headers under the uapi/ directories are exported. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-01-05Merge branch 'akpm' (patches from Andrew)Linus Torvalds2-4/+4
Merge more updates from Andrew Morton: - procfs updates - various misc bits - lib/ updates - epoll updates - autofs - fatfs - a few more MM bits * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (58 commits) mm/page_io.c: fix polled swap page in checkpatch: add Co-developed-by to signature tags docs: fix Co-Developed-by docs drivers/base/platform.c: kmemleak ignore a known leak fs: don't open code lru_to_page() fs/: remove caller signal_pending branch predictions mm/: remove caller signal_pending branch predictions arch/arc/mm/fault.c: remove caller signal_pending_branch predictions kernel/sched/: remove caller signal_pending branch predictions kernel/locking/mutex.c: remove caller signal_pending branch predictions mm: select HAVE_MOVE_PMD on x86 for faster mremap mm: speed up mremap by 20x on large regions mm: treewide: remove unused address argument from pte_alloc functions initramfs: cleanup incomplete rootfs scripts/gdb: fix lx-version string output kernel/kcov.c: mark write_comp_data() as notrace kernel/sysctl: add panic_print into sysctl panic: add options to print system info when panic happens bfs: extra sanity checking and static inode bitmap exec: separate MM_ANONPAGES and RLIMIT_STACK accounting ...
2019-01-04mm: treewide: remove unused address argument from pte_alloc functionsJoel Fernandes (Google)1-2/+2
Patch series "Add support for fast mremap". This series speeds up the mremap(2) syscall by copying page tables at the PMD level even for non-THP systems. There is concern that the extra 'address' argument that mremap passes to pte_alloc may do something subtle architecture related in the future that may make the scheme not work. Also we find that there is no point in passing the 'address' to pte_alloc since its unused. This patch therefore removes this argument tree-wide resulting in a nice negative diff as well. Also ensuring along the way that the enabled architectures do not do anything funky with the 'address' argument that goes unnoticed by the optimization. Build and boot tested on x86-64. Build tested on arm64. The config enablement patch for arm64 will be posted in the future after more testing. The changes were obtained by applying the following Coccinelle script. (thanks Julia for answering all Coccinelle questions!). Following fix ups were done manually: * Removal of address argument from pte_fragment_alloc * Removal of pte_alloc_one_fast definitions from m68k and microblaze. // Options: --include-headers --no-includes // Note: I split the 'identifier fn' line, so if you are manually // running it, please unsplit it so it runs for you. virtual patch @pte_alloc_func_def depends on patch exists@ identifier E2; identifier fn =~ "^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$"; type T2; @@ fn(... - , T2 E2 ) { ... } @pte_alloc_func_proto_noarg depends on patch exists@ type T1, T2, T3, T4; identifier fn =~ "^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$"; @@ ( - T3 fn(T1, T2); + T3 fn(T1); | - T3 fn(T1, T2, T4); + T3 fn(T1, T2); ) @pte_alloc_func_proto depends on patch exists@ identifier E1, E2, E4; type T1, T2, T3, T4; identifier fn =~ "^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$"; @@ ( - T3 fn(T1 E1, T2 E2); + T3 fn(T1 E1); | - T3 fn(T1 E1, T2 E2, T4 E4); + T3 fn(T1 E1, T2 E2); ) @pte_alloc_func_call depends on patch exists@ expression E2; identifier fn =~ "^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$"; @@ fn(... -, E2 ) @pte_alloc_macro depends on patch exists@ identifier fn =~ "^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$"; identifier a, b, c; expression e; position p; @@ ( - #define fn(a, b, c) e + #define fn(a, b) e | - #define fn(a, b) e + #define fn(a) e ) Link: http://lkml.kernel.org/r/20181108181201.88826-2-joelaf@google.com Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org> Suggested-by: Kirill A. Shutemov <kirill@shutemov.name> Acked-by: Kirill A. Shutemov <kirill@shutemov.name> Cc: Michal Hocko <mhocko@kernel.org> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: William Kucharski <william.kucharski@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-04fls: change parameter to unsigned intMatthew Wilcox1-2/+2
When testing in userspace, UBSAN pointed out that shifting into the sign bit is undefined behaviour. It doesn't really make sense to ask for the highest set bit of a negative value, so just turn the argument type into an unsigned int. Some architectures (eg ppc) already had it declared as an unsigned int, so I don't expect too many problems. Link: http://lkml.kernel.org/r/20181105221117.31828-1-willy@infradead.org Signed-off-by: Matthew Wilcox <willy@infradead.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-04Remove 'type' argument from access_ok() functionLinus Torvalds1-1/+1
Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument of the user address range verification function since we got rid of the old racy i386-only code to walk page tables by hand. It existed because the original 80386 would not honor the write protect bit when in kernel mode, so you had to do COW by hand before doing any user access. But we haven't supported that in a long time, and these days the 'type' argument is a purely historical artifact. A discussion about extending 'user_access_begin()' to do the range checking resulted this patch, because there is no way we're going to move the old VERIFY_xyz interface to that model. And it's best done at the end of the merge window when I've done most of my merges, so let's just get this done once and for all. This patch was mostly done with a sed-script, with manual fix-ups for the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form. There were a couple of notable cases: - csky still had the old "verify_area()" name as an alias. - the iter_iov code had magical hardcoded knowledge of the actual values of VERIFY_{READ,WRITE} (not that they mattered, since nothing really used it) - microblaze used the type argument for a debug printout but other than those oddities this should be a total no-op patch. I tried to fix up all architectures, did fairly extensive grepping for access_ok() uses, and the changes are trivial, but I may have missed something. Any missed conversion should be trivially fixable, though. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-03Merge tag 's390-4.21-1' of ↵Linus Torvalds2-11/+21
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Martin Schwidefsky: - A larger update for the zcrypt / AP bus code: + Update two inline assemblies in the zcrypt driver to make gcc happy + Add a missing reply code for invalid special commands for zcrypt + Allow AP device reset to be triggered from user space + Split the AP scan function into smaller, more readable functions - Updates for vfio-ccw and vfio-ap + Add maintainers and reviewer for vfio-ccw + Include facility.h in vfio_ap_drv.c to avoid fragile include chain + Simplicy vfio-ccw state machine - Use the common code version of bust_spinlocks - Make use of the DEFINE_SHOW_ATTRIBUTE - Fix three incorrect file permissions in the DASD driver - Remove bit spin-lock from the PCI interrupt handler - Fix GFP_ATOMIC vs GFP_KERNEL in the PCI code * tag 's390-4.21-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/zcrypt: rework ap scan bus code s390/zcrypt: make sysfs reset attribute trigger queue reset s390/pci: fix sleeping in atomic during hotplug s390/pci: remove bit_lock usage in interrupt handler s390/drivers: fix proc/debugfs file permissions s390: convert to DEFINE_SHOW_ATTRIBUTE MAINTAINERS/vfio-ccw: add Farhan and Eric, make Halil Reviewer vfio: ccw: Merge BUSY and BOXED states s390: use common bust_spinlocks() s390/zcrypt: improve special ap message cmd handling s390/ap: rework assembler functions to use unions for in/out register variables s390: vfio-ap: include <asm/facility> for test_facility()
2018-12-07preempt: Move PREEMPT_NEED_RESCHED definition into arch codeWill Deacon1-0/+2
PREEMPT_NEED_RESCHED is never used directly, so move it into the arch code where it can potentially be implemented using either a different bit in the preempt count or as an entirely separate entity. Cc: Robert Love <rml@tech9.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-11-30s390/zcrypt: improve special ap message cmd handlingHarald Freudenberger1-2/+2
There exist very few ap messages which need to have the 'special' flag enabled. This flag tells the firmware layer to do some pre- and maybe postprocessing. However, it may happen that this special flag is enabled but the firmware is unable to deal with this kind of message and thus returns with reply code 0x41. For example older firmware may not know the newest messages triggered by the zcrypt device driver and thus react with reject and the named reply code. Unfortunately this reply code is not known to the zcrypt error routines and thus default behavior is to switch the ap queue offline. This patch now makes the ap error routine aware of the reply code and so userspace is informed about the bad processing result but the queue is not switched to offline state any more. Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-11-30s390/ap: rework assembler functions to use unions for in/out register variablesHarald Freudenberger1-9/+19
The inline assembler functions ap_aqic() and ap_qact() used two variables declared on the very same register. One variable was for input only, the other for output. Looks like newer versions of the gcc don't like this. Anyway it is a better coding to use one variable (which may have a union data type) on one register for input and output. So this patch introduces unions and uses only one variable now for input and output for GR1 for the PQAP(QACT) and PQAP(QIC) invocation. Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Acked-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-11-09Merge tag 's390-4.20-2' of ↵Linus Torvalds5-12/+25
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Martin Schwidefsky: - A fix for the pgtable_bytes misaccounting on s390. The patch changes common code part in regard to page table folding and adds extra checks to mm_[inc|dec]_nr_[pmds|puds]. - Add FORCE for all build targets using if_changed - Use non-loadable phdr for the .vmlinux.info section to avoid a segment overlap that confuses kexec - Cleanup the attribute definition for the diagnostic sampling - Increase stack size for CONFIG_KASAN=y builds - Export __node_distance to fix a build error - Correct return code of a PMU event init function - An update for the default configs * tag 's390-4.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/perf: Change CPUM_CF return code in event init function s390: update defconfigs s390/mm: Fix ERROR: "__node_distance" undefined! s390/kasan: increase instrumented stack size to 64k s390/cpum_sf: Rework attribute definition for diagnostic sampling s390/mm: fix mis-accounting of pgtable_bytes mm: add mm_pxd_folded checks to pgtable_bytes accounting functions mm: introduce mm_[p4d|pud|pmd]_folded mm: make the __PAGETABLE_PxD_FOLDED defines non-empty s390: avoid vmlinux segments overlap s390/vdso: add missing FORCE to build targets s390/decompressor: add missing FORCE to build targets

Privacy Policy