aboutsummaryrefslogtreecommitdiffstats
path: root/arch/s390/include
AgeCommit message (Collapse)AuthorFilesLines
2020-12-16s390/delay: simplify udelayHeiko Carstens2-8/+6
udelay is implemented by using quite subtle details to make it possible to load an idle psw and waiting for an interrupt even in irq context or when interrupts are disabled. Also handling (or better: no handling) of softirqs is taken into account. All this is done to optimize for something which should in normal circumstances never happen: calling udelay to busy wait. Therefore get rid of the whole complexity and just busy loop like other architectures are doing it also. It could have been possible to use diag 0x44 instead of cpu_relax() in the busy loop, however we have seen too many bad things happen with diag 0x44 that it seems to be better to simply busy loop. Also note that with this new implementation kernel preemption does work when within the udelay loop. This did not work before. To get a feeling what the former code optimizes for: IPL'ing a kernel with 'defconfig' and afterwards compiling a kernel ends with a total of zero udelay calls. Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-12-10s390/crypto: add arch_get_random_long() supportHarald Freudenberger1-1/+4
The random longs to be pulled by arch_get_random_long() are prepared in an 4K buffer which is filled from the NIST 800-90 compliant s390 drbg. By default the random long buffer is refilled 256 times before the drbg itself needs a reseed. The reseed of the drbg is done with 32 bytes fetched from the high quality (but slow) trng which is assumed to deliver 100% entropy. So the 32 * 8 = 256 bits of entropy are spread over 256 * 4KB = 1MB serving 131072 arch_get_random_long() invocations before reseeded. How often the 4K random long buffer is refilled with the drbg before the drbg is reseeded can be adjusted. There is a module parameter 's390_arch_rnd_long_drbg_reseed' accessible via /sys/module/arch_random/parameters/rndlong_drbg_reseed or as kernel command line parameter arch_random.rndlong_drbg_reseed=<value> This parameter tells how often the drbg fills the 4K buffer before it is re-seeded by fresh entropy from the trng. A value of 16 results in reseeding the drbg at every 16 * 4 KB = 64 KB with 32 bytes of fresh entropy pulled from the trng. So a value of 16 would result in 256 bits entropy per 64 KB. A value of 256 results in 1MB of drbg output before a reseed of the drbg is done. So this would spread the 256 bits of entropy among 1MB. Setting this parameter to 0 forces the reseed to take place every time the 4K buffer is depleted, so the entropy rises to 256 bits entropy per 4K or 0.5 bit entropy per arch_get_random_long(). With setting this parameter to negative values all this effort is disabled, arch_get_random long() returns false and thus indicating that the arch_get_random_long() feature is disabled at all. arch_get_random_long() is used by random.c among others to provide an initial hash value to be mixed with the entropy pool on every random data pull. For about 64 bytes read from /dev/urandom there is one call to arch_get_random_long(). So these additional random long values count for performance of /dev/urandom with measurable but low penalty. Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com> Reviewed-by: Juergen Christ <jchrist@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-12-09s390/mm: use invalid asce for user space when switching to init_mmHeiko Carstens1-1/+4
Currently only idle_task_exit() explicitly switches (switch_mm) to init_mm. This causes the kernel asce to be loaded into cr7 and therefore it would be used for potential user space accesses. This is currently no problem since idle_task_exit() is nearly the last thing a CPU executes before it is taken down. However things might change - and therefore make sure that always the invalid asce is used for cr7 when active_mm is init_mm. This makes sure that all potential user space accesses will fail, instead of accessing kernel address space. Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-12-02s390/cio: remove pm support from ccw bus driverVineeth Vijayan1-10/+0
As part of removing broken pm-support from s390 arch, remove the pm callbacks from ccw-bus driver.The power-management functions are unused since the 'commit 394216275c7d ("s390: remove broken hibernate / power management support")'. Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-11-23s390/vdso: reimplement getcpu vdso syscallHeiko Carstens2-0/+9
Implement the previously removed getcpu vdso syscall by using the TOD programmable field to pass the cpu number to user space. Reviewed-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-11-23s390/mm: add debug user asce supportHeiko Carstens1-0/+2
Verify on exit to user space that always - the primary ASCE (cr1) is set to kernel ASCE - the secondary ASCE (cr7) is set to user ASCE If this is not the case: panic since something went terribly wrong. Reviewed-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-11-23s390/mm: use invalid asce instead of kernel asceHeiko Carstens2-1/+2
Create a region 3 page table which contains only invalid entries, and use that via "s390_invalid_asce" instead of the kernel ASCE whenever there is either - no user address space available, e.g. during early startup - as an intermediate ASCE when address spaces are switched This makes sure that user space accesses in such situations are guaranteed to fail. Reviewed-by: Sven Schnelle <svens@linux.ibm.com> Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-11-23s390/mm: remove set_fs / rework address space handlingHeiko Carstens7-81/+9
Remove set_fs support from s390. With doing this rework address space handling and simplify it. As a result address spaces are now setup like this: CPU running in | %cr1 ASCE | %cr7 ASCE | %cr13 ASCE ----------------------------|-----------|-----------|----------- user space | user | user | kernel kernel, normal execution | kernel | user | kernel kernel, kvm guest execution | gmap | user | kernel To achieve this the getcpu vdso syscall is removed in order to avoid secondary address mode and a separate vdso address space in for user space. The getcpu vdso syscall will be implemented differently with a subsequent patch. The kernel accesses user space always via secondary address space. This happens in different ways: - with mvcos in home space mode and directly read/write to secondary address space - with mvcs/mvcp in primary space mode and copy from primary space to secondary space or vice versa - with e.g. cs in secondary space mode and access secondary space Switching translation modes happens with sacf before and after instructions which access user space, like before. Lazy handling of control register reloading is removed in the hope to make everything simpler, but at the cost of making kernel entry and exit a bit slower. That is: on kernel entry the primary asce is always changed to contain the kernel asce, and on kernel exit the primary asce is changed again so it contains the user asce. In kernel mode there is only one exception to the primary asce: when kvm guests are executed the primary asce contains the gmap asce (which describes the guest address space). The primary asce is reset to kernel asce whenever kvm guest execution is interrupted, so that this doesn't has to be taken into account for any user space accesses. Reviewed-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-11-20s390/decompressor: add stacktrace supportVasily Gorbik1-1/+1
Decompressor works on a single statically allocated stack. Stacktrace implementation with -mbackchain just takes few lines of code. Linux version 5.10.0-rc3-22793-g0f84a355b776-dirty (gor@tuxmaker) #27 SMP PREEMPT Mon Nov 9 17:30:18 CET 2020 Kernel fault: interruption code 0005 ilc:2 PSW : 0000000180000000 0000000000012f92 (parse_boot_command_line+0x27a/0x46c) R:0 T:0 IO:0 EX:0 Key:0 M:0 W:0 P:0 AS:0 CC:0 PM:0 RI:0 EA:3 GPRS: 0000000000000000 00ffffffffffffff 0000000000000000 000000000001a62c 000000000000bf60 0000000000000000 00000000000003c0 0000000000000000 0000000000000080 000000000002322d 000000007f29ef20 0000000000efd018 000000000311c000 0000000000010070 0000000000012f82 000000000000bea8 Call Trace: (sp:000000000000bea8 [<000000000002016e>] 000000000002016e) sp:000000000000bf18 [<0000000000012408>] startup_kernel+0x88/0x2fc sp:000000000000bf60 [<00000000000100c4>] startup_normal+0xb0/0xb0 Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-11-20s390/ftrace: assume -mhotpatch or -mrecord-mcount always availableVasily Gorbik1-21/+10
Currently the kernel minimal compiler requirement is gcc 4.9 or clang 10.0.1. * gcc -mhotpatch option is supported since 4.8. * A combination of -pg -mrecord-mcount -mnop-mcount -mfentry flags is supported since gcc 9 and since clang 10. Drop support for old -pg function prologues. Which leaves binary compatible -mhotpatch / -mnop-mcount -mfentry prologues in a form: brcl 0,0 Which are also do not require initial nop optimization / conversion and presence of _mcount symbol. Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-11-20s390: unify identity mapping limits handlingVasily Gorbik1-3/+1
Currently we have to consider too many different values which in the end only affect identity mapping size. These are: 1. max_physmem_end - end of physical memory online or standby. Always <= end of the last online memory block (get_mem_detect_end()). 2. CONFIG_MAX_PHYSMEM_BITS - the maximum size of physical memory the kernel is able to support. 3. "mem=" kernel command line option which limits physical memory usage. 4. OLDMEM_BASE which is a kdump memory limit when the kernel is executed as crash kernel. 5. "hsa" size which is a memory limit when the kernel is executed during zfcp/nvme dump. Through out kernel startup and run we juggle all those values at once but that does not bring any amusement, only confusion and complexity. Unify all those values to a single one we should really care, that is our identity mapping size. Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-11-20s390/cio: fix kernel-doc markups in cio driver.Mauro Carvalho Chehab2-2/+2
Fix typo in the kernel-doc markups 1. ccw driver -> ccw_driver 2. ccw_device_id_is_equal() -> ccw_dev_id_is_equal Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Reviewed-by: Cornelia Huck <cohuck@redhat.com> [vneethv@linux.ibm.com: slight modification in the changelog] Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-11-18s390/sclp: provide extended sccb supportSumanth Korikkar2-3/+6
As the number of cpus increases, the sccb response can exceed 4k for read cpu and read scp info sclp commands. Hence, all cpu info entries cant be embedded within a sccb response Solution: To overcome this limitation, extended sccb facility is provided by sclp. 1. Check if the extended sccb facility is installed. 2. If extended sccb is installed, perform the read scp and read cpu command considering a max sccb length of three page size. This max length is based on factors like max cpus, sccb header. 3. If extended sccb is not installed, perform the read scp and read cpu sclp command considering a max sccb length of one page size. Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com> Reviewed-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-11-12s390/mm: remove unused clear_user_asce()Heiko Carstens1-7/+0
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-11-09s390/kasan: move memory needs estimation into a functionVasily Gorbik1-0/+26
Also correct rounding downs in estimation calculations. Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-11-09s390/kasan: make kasan header self-containedVasily Gorbik1-0/+2
It is relying on _REGION1_SHIFT / _REGION2_SHIFT values which come from asm/pgtable.h, so include it. Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-11-09s390/kasan: remove obvious parameter with the only possible valueVasily Gorbik1-2/+2
Kasan early code is only working on init_mm, remove unneeded pgd parameter from kasan_copy_shadow and rename it to kasan_copy_shadow_mapping. Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-11-09s390/mm: extend default vmalloc area size to 512GBHeiko Carstens1-6/+6
We've seen several occurences in the past where the default vmalloc size of 128GB is not sufficient. Therefore extend the default size. Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Reviewed-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-11-09s390/kasan: remove 3-level paging supportVasily Gorbik1-5/+0
Compiling the kernel with Kasan disables automatic 3-level vs 4-level kernel space paging selection, because the shadow memory offset has to be known at compile time and there is no such offset which would be acceptable for both 3 and 4-level paging. Instead S390_4_LEVEL_PAGING option was introduced which allowed to pick how many paging levels to use under Kasan. With the introduction of protected virtualization, kernel memory layout may be affected due to ultravisor secure storage limit. This adds additional complexity into how memory layout would look like in combination with Kasan predefined shadow memory offsets. To simplify this make Kasan 4-level paging default and remove Kasan 3-level paging support. Suggested-by: Heiko Carstens <hca@linux.ibm.com> Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-11-09s390: remove unused s390_base_ext_handlerVasily Gorbik1-5/+1
s390_base_ext_handler_fn haven't been used since its introduction in commit ab14de6c37fa ("[S390] Convert memory detection into C code."). s390_base_ext_handler itself is currently falsely storing 16 registers at __LC_SAVE_AREA_ASYNC rewriting several following lowcore values: cpu_flags, return_psw, return_mcck_psw, sync_enter_timer and async_enter_timer. Besides that s390_base_ext_handler itself is only potentially hiding EXT interrupts which should not have happen in the first place. Any piece of code which requires EXT interrupts before fully functional ext_int_handler is enabled has to do it on its own, like this is done by sclp_early_cmd() which is doing EXT interrupts handling synchronously in sclp_early_wait_irq(). With s390_base_ext_handler removed unexpected EXT interrupt leads to disabled wait with the address 0x1b0 (__LC_EXT_NEW_PSW), which is currently setup in the decompressor. Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-11-09s390/udelay: make it work for the early codeVasily Gorbik1-0/+1
Currently udelay relies on working EXT interrupts handler, which is not the case during early startup. In such cases udelay_simple() has to be used instead. To avoid mistakes of calling udelay too early, which could happen from the common code as well - make udelay work for the early code by introducing static branch and redirecting all udelay calls to udelay_simple until EXT interrupts handler is fully initialized and async stack is allocated. Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-11-03s390/vdso: remove empty unused fileHeiko Carstens1-0/+0
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-11-03s390/mm: make pmd/pud_deref() large page awareGerald Schaefer1-22/+30
pmd/pud_deref() assume that they will never operate on large pmd/pud entries, and therefore only use the non-large _xxx_ENTRY_ORIGIN mask. With commit 9ec8fa8dc331b ("s390/vmemmap: extend modify_pagetable() to handle vmemmap"), that assumption is no longer true, at least for pmd_deref(). In theory, we could end up with wrong addresses because some of the non-address bits of a large entry would not be masked out. In practice, this does not (yet) show any impact, because vmemmap_free() is currently never used for s390. Fix pmd/pud_deref() to check for the entry type and use the _xxx_ENTRY_ORIGIN_LARGE mask for large entries. While at it, also move pmd/pud_pfn() around, in order to avoid code duplication, because they do the same thing. Fixes: 9ec8fa8dc331b ("s390/vmemmap: extend modify_pagetable() to handle vmemmap") Cc: <stable@vger.kernel.org> # 5.9 Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-10-26s390: correct __bootdata / __bootdata_preserved macrosVasily Gorbik1-2/+2
Currently s390 build is broken. SECTCMP .boot.data error: section .boot.data differs between vmlinux and arch/s390/boot/compressed/vmlinux make[2]: *** [arch/s390/boot/section_cmp.boot.data] Error 1 SECTCMP .boot.preserved.data error: section .boot.preserved.data differs between vmlinux and arch/s390/boot/compressed/vmlinux make[2]: *** [arch/s390/boot/section_cmp.boot.preserved.data] Error 1 make[1]: *** [bzImage] Error 2 Commit 33def8498fdd ("treewide: Convert macro and uses of __section(foo) to __section("foo")") converted all __section(foo) to __section("foo"). This is wrong for __bootdata / __bootdata_preserved macros which want variable names to be a part of intermediate section names .boot.data.<var name> and .boot.preserved.data.<var name>. Those sections are later sorted by alignment + name and merged together into final .boot.data / .boot.preserved.data sections. Those sections must be identical in the decompressor and the decompressed kernel (that is checked during the build). Fixes: 33def8498fdd ("treewide: Convert macro and uses of __section(foo) to __section("foo")") Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-10-25treewide: Convert macro and uses of __section(foo) to __section("foo")Joe Perches2-3/+3
Use a more generic form for __section that requires quotes to avoid complications with clang and gcc differences. Remove the quote operator # from compiler_attributes.h __section macro. Convert all unquoted __section(foo) uses to quoted __section("foo"). Also convert __attribute__((section("foo"))) uses to __section("foo") even if the __attribute__ has multiple list entry forms. Conversion done using the script at: https://lore.kernel.org/lkml/75393e5ddc272dc7403de74d645e6c6e0f4e70eb.camel@perches.com/2-convert_section.pl Signed-off-by: Joe Perches <joe@perches.com> Reviewed-by: Nick Desaulniers <ndesaulniers@gooogle.com> Reviewed-by: Miguel Ojeda <ojeda@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-22Merge tag 'vfio-v5.10-rc1' of git://github.com/awilliam/linux-vfioLinus Torvalds1-1/+3
Pull VFIO updates from Alex Williamson: - New fsl-mc vfio bus driver supporting userspace drivers of objects within NXP's DPAA2 architecture (Diana Craciun) - Support for exposing zPCI information on s390 (Matthew Rosato) - Fixes for "detached" VFs on s390 (Matthew Rosato) - Fixes for pin-pages and dma-rw accesses (Yan Zhao) - Cleanups and optimize vconfig regen (Zenghui Yu) - Fix duplicate irq-bypass token registration (Alex Williamson) * tag 'vfio-v5.10-rc1' of git://github.com/awilliam/linux-vfio: (30 commits) vfio iommu type1: Fix memory leak in vfio_iommu_type1_pin_pages vfio/pci: Clear token on bypass registration failure vfio/fsl-mc: fix the return of the uninitialized variable ret vfio/fsl-mc: Fix the dead code in vfio_fsl_mc_set_irq_trigger vfio/fsl-mc: Fixed vfio-fsl-mc driver compilation on 32 bit MAINTAINERS: Add entry for s390 vfio-pci vfio-pci/zdev: Add zPCI capabilities to VFIO_DEVICE_GET_INFO vfio/fsl-mc: Add support for device reset vfio/fsl-mc: Add read/write support for fsl-mc devices vfio/fsl-mc: trigger an interrupt via eventfd vfio/fsl-mc: Add irq infrastructure for fsl-mc devices vfio/fsl-mc: Added lock support in preparation for interrupt handling vfio/fsl-mc: Allow userspace to MMAP fsl-mc device MMIO regions vfio/fsl-mc: Implement VFIO_DEVICE_GET_REGION_INFO ioctl call vfio/fsl-mc: Implement VFIO_DEVICE_GET_INFO ioctl vfio/fsl-mc: Scan DPRC objects on vfio-fsl-mc driver bind vfio: Introduce capability definitions for VFIO_DEVICE_GET_INFO s390/pci: track whether util_str is valid in the zpci_dev s390/pci: stash version in the zpci_dev vfio/fsl-mc: Add VFIO framework skeleton for fsl-mc devices ...
2020-10-16Merge tag 's390-5.10-1' of ↵Linus Torvalds32-145/+536
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Vasily Gorbik: - Remove address space overrides using set_fs() - Convert to generic vDSO - Convert to generic page table dumper - Add ARCH_HAS_DEBUG_WX support - Add leap seconds handling support - Add NVMe firmware-assisted kernel dump support - Extend NVMe boot support with memory clearing control and addition of kernel parameters - AP bus and zcrypt api code rework. Add adapter configure/deconfigure interface. Extend debug features. Add failure injection support - Add ECC secure private keys support - Add KASan support for running protected virtualization host with 4-level paging - Utilize destroy page ultravisor call to speed up secure guests shutdown - Implement ioremap_wc() and ioremap_prot() with MIO in PCI code - Various checksum improvements - Other small various fixes and improvements all over the code * tag 's390-5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (85 commits) s390/uaccess: fix indentation s390/uaccess: add default cases for __put_user_fn()/__get_user_fn() s390/zcrypt: fix wrong format specifications s390/kprobes: move insn_page to text segment s390/sie: fix typo in SIGP code description s390/lib: fix kernel doc for memcmp() s390/zcrypt: Introduce Failure Injection feature s390/zcrypt: move ap_msg param one level up the call chain s390/ap/zcrypt: revisit ap and zcrypt error handling s390/ap: Support AP card SCLP config and deconfig operations s390/sclp: Add support for SCLP AP adapter config/deconfig s390/ap: add card/queue deconfig state s390/ap: add error response code field for ap queue devices s390/ap: split ap queue state machine state from device state s390/zcrypt: New config switch CONFIG_ZCRYPT_DEBUG s390/zcrypt: introduce msg tracking in zcrypt functions s390/startup: correct early pgm check info formatting s390: remove orphaned extern variables declarations s390/kasan: make sure int handler always run with DAT on s390/ipl: add support to control memory clearing for nvme re-IPL ...
2020-10-15Merge tag 'net-next-5.10' of ↵Linus Torvalds3-4/+16
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: - Add redirect_neigh() BPF packet redirect helper, allowing to limit stack traversal in common container configs and improving TCP back-pressure. Daniel reports ~10Gbps => ~15Gbps single stream TCP performance gain. - Expand netlink policy support and improve policy export to user space. (Ge)netlink core performs request validation according to declared policies. Expand the expressiveness of those policies (min/max length and bitmasks). Allow dumping policies for particular commands. This is used for feature discovery by user space (instead of kernel version parsing or trial and error). - Support IGMPv3/MLDv2 multicast listener discovery protocols in bridge. - Allow more than 255 IPv4 multicast interfaces. - Add support for Type of Service (ToS) reflection in SYN/SYN-ACK packets of TCPv6. - In Multi-patch TCP (MPTCP) support concurrent transmission of data on multiple subflows in a load balancing scenario. Enhance advertising addresses via the RM_ADDR/ADD_ADDR options. - Support SMC-Dv2 version of SMC, which enables multi-subnet deployments. - Allow more calls to same peer in RxRPC. - Support two new Controller Area Network (CAN) protocols - CAN-FD and ISO 15765-2:2016. - Add xfrm/IPsec compat layer, solving the 32bit user space on 64bit kernel problem. - Add TC actions for implementing MPLS L2 VPNs. - Improve nexthop code - e.g. handle various corner cases when nexthop objects are removed from groups better, skip unnecessary notifications and make it easier to offload nexthops into HW by converting to a blocking notifier. - Support adding and consuming TCP header options by BPF programs, opening the doors for easy experimental and deployment-specific TCP option use. - Reorganize TCP congestion control (CC) initialization to simplify life of TCP CC implemented in BPF. - Add support for shipping BPF programs with the kernel and loading them early on boot via the User Mode Driver mechanism, hence reusing all the user space infra we have. - Support sleepable BPF programs, initially targeting LSM and tracing. - Add bpf_d_path() helper for returning full path for given 'struct path'. - Make bpf_tail_call compatible with bpf-to-bpf calls. - Allow BPF programs to call map_update_elem on sockmaps. - Add BPF Type Format (BTF) support for type and enum discovery, as well as support for using BTF within the kernel itself (current use is for pretty printing structures). - Support listing and getting information about bpf_links via the bpf syscall. - Enhance kernel interfaces around NIC firmware update. Allow specifying overwrite mask to control if settings etc. are reset during update; report expected max time operation may take to users; support firmware activation without machine reboot incl. limits of how much impact reset may have (e.g. dropping link or not). - Extend ethtool configuration interface to report IEEE-standard counters, to limit the need for per-vendor logic in user space. - Adopt or extend devlink use for debug, monitoring, fw update in many drivers (dsa loop, ice, ionic, sja1105, qed, mlxsw, mv88e6xxx, dpaa2-eth). - In mlxsw expose critical and emergency SFP module temperature alarms. Refactor port buffer handling to make the defaults more suitable and support setting these values explicitly via the DCBNL interface. - Add XDP support for Intel's igb driver. - Support offloading TC flower classification and filtering rules to mscc_ocelot switches. - Add PTP support for Marvell Octeontx2 and PP2.2 hardware, as well as fixed interval period pulse generator and one-step timestamping in dpaa-eth. - Add support for various auth offloads in WiFi APs, e.g. SAE (WPA3) offload. - Add Lynx PHY/PCS MDIO module, and convert various drivers which have this HW to use it. Convert mvpp2 to split PCS. - Support Marvell Prestera 98DX3255 24-port switch ASICs, as well as 7-port Mediatek MT7531 IP. - Add initial support for QCA6390 and IPQ6018 in ath11k WiFi driver, and wcn3680 support in wcn36xx. - Improve performance for packets which don't require much offloads on recent Mellanox NICs by 20% by making multiple packets share a descriptor entry. - Move chelsio inline crypto drivers (for TLS and IPsec) from the crypto subtree to drivers/net. Move MDIO drivers out of the phy directory. - Clean up a lot of W=1 warnings, reportedly the actively developed subsections of networking drivers should now build W=1 warning free. - Make sure drivers don't use in_interrupt() to dynamically adapt their code. Convert tasklets to use new tasklet_setup API (sadly this conversion is not yet complete). * tag 'net-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2583 commits) Revert "bpfilter: Fix build error with CONFIG_BPFILTER_UMH" net, sockmap: Don't call bpf_prog_put() on NULL pointer bpf, selftest: Fix flaky tcp_hdr_options test when adding addr to lo bpf, sockmap: Add locking annotations to iterator netfilter: nftables: allow re-computing sctp CRC-32C in 'payload' statements net: fix pos incrementment in ipv6_route_seq_next net/smc: fix invalid return code in smcd_new_buf_create() net/smc: fix valid DMBE buffer sizes net/smc: fix use-after-free of delayed events bpfilter: Fix build error with CONFIG_BPFILTER_UMH cxgb4/ch_ipsec: Replace the module name to ch_ipsec from chcr net: sched: Fix suspicious RCU usage while accessing tcf_tunnel_info bpf: Fix register equivalence tracking. rxrpc: Fix loss of final ack on shutdown rxrpc: Fix bundle counting for exclusive connections netfilter: restore NF_INET_NUMHOOKS ibmveth: Identify ingress large send packets. ibmveth: Switch order of ibmveth_helper calls. cxgb4: handle 4-tuple PEDIT to NAT mode translation selftests: Add VRF route leaking tests ...
2020-10-12Merge branch 'work.quota-compat' of ↵Linus Torvalds1-2/+0
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull compat quotactl cleanups from Al Viro: "More Christoph's compat cleanups: quotactl(2)" * 'work.quota-compat' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: quota: simplify the quotactl compat handling compat: add a compat_need_64bit_alignment_fixup() helper compat: lift compat_s64 and compat_u64 to <asm-generic/compat.h>
2020-10-12Merge branch 'work.csum_and_copy' of ↵Linus Torvalds1-7/+0
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull copy_and_csum cleanups from Al Viro: "Saner calling conventions for csum_and_copy_..._user() and friends" [ Removing 800+ lines of code and cleaning stuff up is good - Linus ] * 'work.csum_and_copy' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: ppc: propagate the calling conventions change down to csum_partial_copy_generic() amd64: switch csum_partial_copy_generic() to new calling conventions sparc64: propagate the calling convention changes down to __csum_partial_copy_...() xtensa: propagate the calling conventions change down into csum_partial_copy_generic() mips: propagate the calling convention change down into __csum_partial_copy_..._user() mips: __csum_partial_copy_kernel() has no users left mips: csum_and_copy_{to,from}_user() are never called under KERNEL_DS sparc32: propagate the calling conventions change down to __csum_partial_copy_sparc_generic() i386: propagate the calling conventions change down to csum_partial_copy_generic() sh: propage the calling conventions change down to csum_partial_copy_generic() m68k: get rid of zeroing destination on error in csum_and_copy_from_user() arm: propagate the calling convention changes down to csum_partial_copy_from_user() alpha: propagate the calling convention changes down to csum_partial_copy.c helpers saner calling conventions for csum_and_copy_..._user() csum_and_copy_..._user(): pass 0xffffffff instead of 0 as initial sum csum_partial_copy_nocheck(): drop the last argument unify generic instances of csum_partial_copy_nocheck() icmp_push_reply(): reorder adding the checksum up skb_copy_and_csum_bits(): don't bother with the last argument
2020-10-09s390/uaccess: fix indentationHeiko Carstens1-1/+1
Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-10-09s390/uaccess: add default cases for __put_user_fn()/__get_user_fn()Heiko Carstens1-4/+9
Add default cases for __put_user_fn()/__get_user_fn(). This doesn't fix anything since the functions are only called with sane values. However we get rid of smatch warnings: ./arch/s390/include/asm/uaccess.h:143 __get_user_fn() error: uninitialized symbol 'rc'. Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-10-07s390/pci: track whether util_str is valid in the zpci_devMatthew Rosato1-1/+2
We'll need to keep track of whether or not the byte string in util_str is valid and thus needs to be passed to a vfio-pci passthrough device. Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com> Acked-by: Niklas Schnelle <schnelle@linux.ibm.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-10-07s390/pci: stash version in the zpci_devMatthew Rosato1-0/+1
In preparation for passing the info on to vfio-pci devices, stash the supported PCI version for the target device in the zpci_dev. Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com> Acked-by: Niklas Schnelle <schnelle@linux.ibm.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-10-07s390/sie: fix typo in SIGP code descriptionJulian Wiedmann1-1/+1
s/ait address/at address Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-10-07s390/sclp: Add support for SCLP AP adapter config/deconfigHarald Freudenberger1-0/+2
Add support for AP bus adapter config and deconfig to the sclp core code. The code is statically build into the kernel when ZCRYPT is configured either as module or with static support. This is the base functionality for having configure/deconfigure support in the AP bus and card code. Another patch will exploit this soon. Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Suggested-by: Pierre Morel <pmorel@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-10-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-12/+30
Rejecting non-native endian BTF overlapped with the addition of support for it. The rest were more simple overlapping changes, except the renesas ravb binding update, which had to follow a file move as well as a YAML conversion. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-02s390: remove orphaned extern variables declarationsVasily Gorbik1-3/+0
arch/s390/kernel/entry.h: suspend_zero_pages - only declaration left after commit 394216275c7d ("s390: remove broken hibernate / power management support") arch/s390/include/asm/setup.h: vmhalt_cmd - only declaration left after commit 99ca4e582d4a ("[S390] kernel: Shutdown Actions Interface") arch/s390/include/asm/setup.h: vmpoff_cmd - only declaration left after commit 99ca4e582d4a ("[S390] kernel: Shutdown Actions Interface") Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-10-02s390/nvme: support firmware-assisted dump to NVMe disksAlexander Egorenkov1-0/+6
From the kernel perspective NVMe dump works exactly like zFCP dump. Therefore, adapt all places where code explicitly tests only for IPL of type FCP DUMP. And also set the memory end correctly in this case. Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com> Reviewed-by: Vasily Gorbik <gor@linux.ibm.com> Reviewed-by: Philipp Rudo <prudo@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-10-02s390: nvme dump supportJason J. Herne1-0/+1
Add the nvme dump ipl type, associated data, and sysfs entries. This allows booting into a stand alone dump environment that resides on an nvme device. Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-09-30s390: remove orphaned function declarationsVasily Gorbik6-10/+0
arch/s390/pci/pci_bus.h: zpci_bus_init - only declaration left after commit 05bc1be6db4b ("s390/pci: create zPCI bus") arch/s390/include/asm/gmap.h: gmap_pte_notify - only declaration left after commit 4be130a08420 ("s390/mm: add shadow gmap support") arch/s390/include/asm/pgalloc.h: rcu_table_freelist_finish - only declaration left after commit 36409f6353fc ("[S390] use generic RCU page-table freeing code") arch/s390/include/asm/tlbflush.h: smp_ptlb_all - only declaration left after commit 5a79859ae0f3 ("s390: remove 31 bit support") arch/s390/include/asm/vtimer.h: init_cpu_vtimer - only declaration left after commit b5f87f15e200 ("s390/idle: consolidate idle functions and definitions") arch/s390/include/asm/pci.h: zpci_debug_info - only declaration left after commit 386aa051fb4b ("s390/pci: remove per device debug attribute") arch/s390/include/asm/vdso.h: vdso_alloc_boot_cpu - only declaration left after commit 4bff8cb54502 ("s390: convert to GENERIC_VDSO") arch/s390/include/asm/smp.h: smp_vcpu_scheduled - only declaration left after commit 67626fadd269 ("s390: enforce CONFIG_SMP") arch/s390/kernel/entry.h: restart_call_handler - only declaration left after commit 8b646bd75908 ("[S390] rework smp code") arch/s390/kernel/entry.h: startup_init_nobss - only declaration left after commit 2e83e0eb85ca ("s390: clean .bss before running uncompressed kernel") arch/s390/kernel/entry.h: s390_early_resume - only declaration left after commit 394216275c7d ("s390: remove broken hibernate / power management support") drivers/s390/char/raw3270.h: raw3270_request_alloc_bootmem - only declaration left after commit 33403dcfcdfd ("[S390] 3270 console: convert from bootmem to slab") drivers/s390/cio/device.h: ccw_device_schedule_sch_unregister - only declaration left after commit 37de53bb5290 ("[S390] cio: introduce ccw device todos") drivers/s390/char/tape.h: tape_hotplug_event - has only declaration since recorded git history. drivers/s390/char/tape.h: tape_oper_handler - has only declaration since recorded git history. drivers/s390/char/tape.h: tape_noper_handler - has only declaration since recorded git history. drivers/s390/char/tape_std.h: tape_std_check_locate - only declaration left after commit 161beff8f40d ("s390/tape: remove tape block leftovers") drivers/s390/char/tape_std.h: tape_std_default_handler - has only declaration since recorded git history. drivers/s390/char/tape_std.h: tape_std_unexpect_uchk_handler - has only declaration since recorded git history. drivers/s390/char/tape_std.h: tape_std_irq - has only declaration since recorded git history. drivers/s390/char/tape_std.h: tape_std_error_recovery - has only declaration since recorded git history. drivers/s390/char/tape_std.h: tape_std_error_recovery_has_failed - has only declaration since recorded git history. drivers/s390/char/tape_std.h: tape_std_error_recovery_succeded - has only declaration since recorded git history. drivers/s390/char/tape_std.h: tape_std_error_recovery_do_retry - has only declaration since recorded git history. drivers/s390/char/tape_std.h: tape_std_error_recovery_read_opposite - has only declaration since recorded git history. drivers/s390/char/tape_std.h: tape_std_error_recovery_HWBUG - has only declaration since recorded git history. Reviewed-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-09-30s390/vdso: remove orphaned declarationsVasily Gorbik1-2/+0
Remove couple of declarations which are unused since commit 4bff8cb54502 ("s390: convert to GENERIC_VDSO"). Acked-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-09-30s390/cio: remove unused channel_subsystem_reinitVasily Gorbik1-1/+0
Added with commit 77e844b96440 ("s390/hibernate: add early resume function") unused since commit 394216275c7d ("s390: remove broken hibernate / power management support"). Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-09-29s390: remove unused _swsusp_reset_dmaVasily Gorbik1-1/+0
Since commit 394216275c7d ("s390: remove broken hibernate / power management support") _swsusp_reset_dma is unused and could be safely removed. Reviewed-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-09-26mm/gup: fix gup_fast with dynamic page table foldingVasily Gorbik1-12/+30
Currently to make sure that every page table entry is read just once gup_fast walks perform READ_ONCE and pass pXd value down to the next gup_pXd_range function by value e.g.: static int gup_pud_range(p4d_t p4d, unsigned long addr, unsigned long end, unsigned int flags, struct page **pages, int *nr) ... pudp = pud_offset(&p4d, addr); This function passes a reference on that local value copy to pXd_offset, and might get the very same pointer in return. This happens when the level is folded (on most arches), and that pointer should not be iterated. On s390 due to the fact that each task might have different 5,4 or 3-level address translation and hence different levels folded the logic is more complex and non-iteratable pointer to a local copy leads to severe problems. Here is an example of what happens with gup_fast on s390, for a task with 3-level paging, crossing a 2 GB pud boundary: // addr = 0x1007ffff000, end = 0x10080001000 static int gup_pud_range(p4d_t p4d, unsigned long addr, unsigned long end, unsigned int flags, struct page **pages, int *nr) { unsigned long next; pud_t *pudp; // pud_offset returns &p4d itself (a pointer to a value on stack) pudp = pud_offset(&p4d, addr); do { // on second iteratation reading "random" stack value pud_t pud = READ_ONCE(*pudp); // next = 0x10080000000, due to PUD_SIZE/MASK != PGDIR_SIZE/MASK on s390 next = pud_addr_end(addr, end); ... } while (pudp++, addr = next, addr != end); // pudp++ iterating over stack return 1; } This happens since s390 moved to common gup code with commit d1874a0c2805 ("s390/mm: make the pxd_offset functions more robust") and commit 1a42010cdc26 ("s390/mm: convert to the generic get_user_pages_fast code"). s390 tried to mimic static level folding by changing pXd_offset primitives to always calculate top level page table offset in pgd_offset and just return the value passed when pXd_offset has to act as folded. What is crucial for gup_fast and what has been overlooked is that PxD_SIZE/MASK and thus pXd_addr_end should also change correspondingly. And the latter is not possible with dynamic folding. To fix the issue in addition to pXd values pass original pXdp pointers down to gup_pXd_range functions. And introduce pXd_offset_lockless helpers, which take an additional pXd entry value parameter. This has already been discussed in https://lkml.kernel.org/r/20190418100218.0a4afd51@mschwideX1 Fixes: 1a42010cdc26 ("s390/mm: convert to the generic get_user_pages_fast code") Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Reviewed-by: John Hubbard <jhubbard@nvidia.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Claudio Imbrenda <imbrenda@linux.ibm.com> Cc: <stable@vger.kernel.org> [5.2+] Link: https://lkml.kernel.org/r/patch.git-943f1e5dcff2.your-ad-here.call-01599856292-ext-8676@work.hours Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-09-26s390/stp: add support for leap secondsSven Schnelle2-1/+46
In the current implementation, leap seconds are only synchronized during the bootup process when the STP clock is synced. If the Leap second offset (LSO) changes the machine must be rebooted, which is not desired. This patch adds the required code to handle Leap second changes during runtime. If the Leap second changes, a Configuration change machine check is triggered. The STP code than schedules a Leap second insertion/deletion with do_adjtimex(). Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-09-26s390/stp: use u32 instead of unsigned intSven Schnelle1-25/+25
In hardware-dependent headers using u32 is easier to read and less error-prone. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-09-26s390/stp: use __packedSven Schnelle1-2/+4
Use __packed instead of __attribute__((packed)) Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-09-24s390/pkey: support CCA and EP11 secure ECC private keysHarald Freudenberger1-15/+62
This patch extends the pkey kernel module to support CCA and EP11 secure ECC (private) keys as source for deriving ECC protected (private) keys. There is yet another new ioctl to support this: PKEY_KBLOB2PROTK3 can handle all the old keys plus CCA and EP11 secure ECC keys. For details see ioctl description in pkey.h. The CPACF unit currently only supports a subset of 5 different ECC curves (P-256, P-384, P-521, ED25519, ED448) and so only keys of this curve type can be transformed into protected keys. However, the pkey and the cca/ep11 low level functions do not check this but simple pass-through the key blob to the firmware onto the crypto cards. So most likely the failure will be a response carrying an error code resulting in user space errno value EIO instead of EINVAL. Deriving a protected key from an EP11 ECC secure key requires a CEX7 in EP11 mode. Deriving a protected key from an CCA ECC secure key requires a CEX7 in CCA mode. Together with this new ioctl the ioctls for querying lists of apqns (PKEY_APQNS4K and PKEY_APQNS4KT) have been extended to support EP11 and CCA ECC secure key type and key blobs. Together with this ioctl there comes a new struct ep11kblob_header which is to be prepended onto the EP11 key blob. See details in pkey.h for the fields in there. The older EP11 AES key blob with some info stored in the (unused) session field is also supported with this new ioctl. Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-09-21s390/sclp: remove unused sclp_early_printk_forcedVasily Gorbik1-2/+1
This reverts commit 55a5542a5462 ("s390/hibernate: fix error handling when suspend cpu != resume cpu"). It added sclp_early_printk_force() which is no longer used since commit 394216275c7d ("s390: remove broken hibernate / power management support"). No hibernate - no problem. Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

Privacy Policy