aboutsummaryrefslogtreecommitdiffstats
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2020-12-16s390/irq: select HAVE_IRQ_EXIT_ON_IRQ_STACKHeiko Carstens1-0/+1
irq_exit() is always called on async stack. Therefore select HAVE_IRQ_EXIT_ON_IRQ_STACK and get a tiny optimization in invoke_softirq(). Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-12-16s390/delay: simplify udelayHeiko Carstens4-94/+23
udelay is implemented by using quite subtle details to make it possible to load an idle psw and waiting for an interrupt even in irq context or when interrupts are disabled. Also handling (or better: no handling) of softirqs is taken into account. All this is done to optimize for something which should in normal circumstances never happen: calling udelay to busy wait. Therefore get rid of the whole complexity and just busy loop like other architectures are doing it also. It could have been possible to use diag 0x44 instead of cpu_relax() in the busy loop, however we have seen too many bad things happen with diag 0x44 that it seems to be better to simply busy loop. Also note that with this new implementation kernel preemption does work when within the udelay loop. This did not work before. To get a feeling what the former code optimizes for: IPL'ing a kernel with 'defconfig' and afterwards compiling a kernel ends with a total of zero udelay calls. Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-12-16s390/test_unwind: use timer instead of udelayHeiko Carstens1-14/+10
Instead of registering an external interrupt handler and relying on the udelay implementation, simply use a timer to get into irq context. Acked-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-12-16s390/test_unwind: fix CALL_ON_STACK testsHeiko Carstens1-2/+5
The CALL_ON_STACK tests use the no_dat stack to switch to a different stack for unwinding tests. If an interrupt or machine check happens while using that stack, and previously being on the async stack, the interrupt / machine check entry code (SWITCH_ASYNC) will assume that the previous context did not use the async stack and happily use the async stack again. This will lead to stack corruption of the previous context. To solve this disable both interrupts and machine checks before switching to the no_dat stack. Fixes: 7868249fbbc8 ("s390/test_unwind: add CALL_ON_STACK tests") Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-12-16s390: make calls to TRACE_IRQS_OFF/TRACE_IRQS_ON balancedHeiko Carstens1-2/+2
In case of udelay CIF_IGNORE_IRQ is set. This leads to an unbalanced call of TRACE_IRQS_OFF and TRACE_IRQS_ON. That is: from lockdep's point of view TRACE_IRQS_ON is called one time too often. This doesn't fix any real bug, just makes the calls balanced. Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-12-16s390: always clear kernel stack backchain before calling functionsHeiko Carstens1-6/+6
Clear the kernel stack backchain before potentially calling the lockdep trace_hardirqs_off/on functions. Without this walking the kernel backchain, e.g. during a panic, might stop too early. Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-12-14Merge tag 's390-5.11-1' of ↵Linus Torvalds68-940/+908
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Heiko Carstens: - Add support for the hugetlb_cma command line option to allocate gigantic hugepages using CMA - Add arch_get_random_long() support. - Add ap bus userspace notifications. - Increase default size of vmalloc area to 512GB and otherwise let it increase dynamically by the size of physical memory. This should fix all occurrences where the vmalloc area was not large enough. - Completely get rid of set_fs() (aka select SET_FS) and rework address space handling while doing that; making address space handling much more simple. - Reimplement getcpu vdso syscall in C. - Add support for extended SCLP responses (> 4k). This allows e.g. to handle also potential large system configurations. - Simplify KASAN by removing 3-level page table support and only supporting 4-levels from now on. - Improve debug-ability of the kernel decompressor code, which now prints also stack traces and symbols in case of problems to the console. - Remove more power management leftovers. - Other various fixes and improvements all over the place. * tag 's390-5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (62 commits) s390/mm: add support to allocate gigantic hugepages using CMA s390/crypto: add arch_get_random_long() support s390/smp: perform initial CPU reset also for SMT siblings s390/mm: use invalid asce for user space when switching to init_mm s390/idle: fix accounting with machine checks s390/idle: add missing mt_cycles calculation s390/boot: add build-id to decompressor s390/kexec_file: fix diag308 subcode when loading crash kernel s390/cio: fix use-after-free in ccw_device_destroy_console s390/cio: remove pm support from ccw bus driver s390/cio: remove pm support from css-bus driver s390/cio: remove pm support from IO subchannel drivers s390/cio: remove pm support from chsc subchannel driver s390/vmur: remove unused pm related functions s390/tape: remove unsupported PM functions s390/cio: remove pm support from eadm-sch drivers s390: remove pm support from console drivers s390/dasd: remove unused pm related functions s390/zfcp: remove pm support from zfcp driver s390/ap: let bus_register() add the AP bus sysfs attributes ...
2020-12-14Merge tag 'm68k-for-v5.11-tag1' of ↵Linus Torvalds31-136/+122
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k Pull m68k updates from Geert Uytterhoeven: - fix WARNING splat in pmac_zilog driver - fix ADB input device regression - assume maintainership for adb-iop and via-macii - minor fixes and improvements - defconfig updates * tag 'm68k-for-v5.11-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: MAINTAINERS: Update m68k Mac entry macintosh/adb-iop: Send correct poll command macintosh/adb-iop: Always wait for reply message from IOP m68k: Fix WARNING splat in pmac_zilog driver m68k: Add a missing ELF_DETAILS in link script m68k: Drop redundant NOTES in link script m68k: mac: Update Kconfig help m68k: mac: Remove redundant VIA register writes m68k: mac: Remove dead code m68k: mac: Refactor iop_preinit() and iop_init() m68k: defconfig: Enable KUnit tests m68k: defconfig: Update defconfigs for v5.10-rc1 m68k: Remove unused mach_max_dma_address m68k: Avoid xchg() warning
2020-12-14Merge tag 'x86_build_for_v5.11' of ↵Linus Torvalds7-55/+30
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 build updates from Borislav Petkov: "Two x86 build fixes: - Fix the vmlinux size check on 64-bit along with adding useful clarifications on the topic (Arvind Sankar) - Remove -m16 workaround now that the GCC versions that need it are unsupported (Nick Desaulniers)" * tag 'x86_build_for_v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/build: Remove -m16 workaround for unsupported versions of GCC x86/build: Fix vmlinux size check on 64-bit
2020-12-14Merge tag 'x86_cache_for_v5.11' of ↵Linus Torvalds4-15/+95
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 cache resource control updates from Borislav Petkov: - add logic to correct MBM total and local values fixing errata SKX99 and BDF102 (Fenghua Yu) - cleanups * tag 'x86_cache_for_v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/resctrl: Clean up unused function parameter in rmdir path x86/resctrl: Constify kernfs_ops x86/resctrl: Correct MBM total and local values Documentation/x86: Rename resctrl_ui.rst and add two errata to the file
2020-12-14Merge tag 'x86_cleanups_for_v5.11' of ↵Linus Torvalds33-207/+78
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 cleanups from Borislav Petkov: "Another branch with a nicely negative diffstat, just the way I like 'em: - Remove all uses of TIF_IA32 and TIF_X32 and reclaim the two bits in the end (Gabriel Krisman Bertazi) - All kinds of minor cleanups all over the tree" * tag 'x86_cleanups_for_v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits) x86/ia32_signal: Propagate __user annotation properly x86/alternative: Update text_poke_bp() kernel-doc comment x86/PCI: Make a kernel-doc comment a normal one x86/asm: Drop unused RDPID macro x86/boot/compressed/64: Use TEST %reg,%reg instead of CMP $0,%reg x86/head64: Remove duplicate include x86/mm: Declare 'start' variable where it is used x86/head/64: Remove unused GET_CR2_INTO() macro x86/boot: Remove unused finalize_identity_maps() x86/uaccess: Document copy_from_user_nmi() x86/dumpstack: Make show_trace_log_lvl() static x86/mtrr: Fix a kernel-doc markup x86/setup: Remove unused MCA variables x86, libnvdimm/test: Remove COPY_MC_TEST x86: Reclaim TIF_IA32 and TIF_X32 x86/mm: Convert mmu context ia32_compat into a proper flags field x86/elf: Use e_machine to check for x32/ia32 in setup_additional_pages() elf: Expose ELF header on arch_setup_additional_pages() x86/elf: Use e_machine to select start_thread for x32 elf: Expose ELF header in compat_start_thread() ...
2020-12-14Merge tag 'x86_mm_for_v5.11' of ↵Linus Torvalds1-2/+10
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 mm update from Borislav Petkov: "A single improvement to check ident_pud_init()'s return value (Arvind Sankar)" * tag 'x86_mm_for_v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm/ident_map: Check for errors from ident_pud_init()
2020-12-14Merge tag 'x86_misc_for_v5.11' of ↵Linus Torvalds2-7/+5
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull misc x86 updates from Borislav Petkov: "The main part of this branch is the ongoing fight against windmills in an attempt to have userspace tools not poke at naked MSRs. This round deals with MSR_IA32_ENERGY_PERF_BIAS and removes direct poking into it by our in-tree tools in favor of the proper "energy_perf_bias" sysfs interface which we already have. In addition, the msr.ko write filtering's error message points to a new summary page which contains the info we collected from helpful reporters about which userspace tools write MSRs: https://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git/about along with the current status of their conversion. The rest is the usual small fixes and improvements" * tag 'x86_misc_for_v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/msr: Add a pointer to an URL which contains further details x86/pci: Fix the function type for check_reserved_t selftests/x86: Add missing .note.GNU-stack sections selftests/x86/fsgsbase: Fix GS == 1, 2, and 3 tests x86/msr: Downgrade unrecognized MSR message x86/msr: Do not allow writes to MSR_IA32_ENERGY_PERF_BIAS tools/power/x86_energy_perf_policy: Read energy_perf_bias from sysfs tools/power/turbostat: Read energy_perf_bias from sysfs tools/power/cpupower: Read energy_perf_bias from sysfs MAINTAINERS: Cleanup SGI-related entries
2020-12-14Merge tag 'x86_platform_for_v5.11' of ↵Linus Torvalds6-65/+232
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 platform updates from Borislav Petkov: - add a new uv_sysfs driver and expose read-only information from UV BIOS (Justin Ernst and Mike Travis) - the usual set of small fixes * tag 'x86_platform_for_v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/platform/uv: Update sysfs documentation x86/platform/uv: Add deprecated messages to /proc info leaves x86/platform/uv: Add sysfs hubless leaves x86/platform/uv: Add sysfs leaves to replace those in procfs x86/platform/uv: Add kernel interfaces for obtaining system info x86/platform/uv: Make uv_pcibus_kset and uv_hubs_kset static x86/platform/uv: Fix an error code in uv_hubs_init() x86/platform/uv: Update MAINTAINERS for uv_sysfs driver x86/platform/uv: Update ABI documentation of /sys/firmware/sgi_uv/ x86/platform/uv: Add new uv_sysfs platform driver x86/platform/uv: Add and export uv_bios_* functions x86/platform/uv: Remove existing /sys/firmware/sgi_uv/ interface
2020-12-14Merge tag 'x86_cpu_for_v5.11' of ↵Linus Torvalds10-76/+31
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 cpuid updates from Borislav Petkov: "Only AMD-specific changes this time: - Save the AMD physical die ID into cpuinfo_x86.cpu_die_id and convert all code to use it (Yazen Ghannam) - Remove a dead and unused TSEG region remapping workaround on AMD (Arvind Sankar)" * tag 'x86_cpu_for_v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/cpu/amd: Remove dead code for TSEG region remapping x86/topology: Set cpu_die_id only if DIE_TYPE found EDAC/mce_amd: Use struct cpuinfo_x86.cpu_die_id for AMD NodeId x86/CPU/AMD: Remove amd_get_nb_id() x86/CPU/AMD: Save AMD NodeId as cpu_die_id
2020-12-14Merge tag 'x86_sgx_for_v5.11' of ↵Linus Torvalds29-19/+3778
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 SGC support from Borislav Petkov: "Intel Software Guard eXtensions enablement. This has been long in the making, we were one revision number short of 42. :) Intel SGX is new hardware functionality that can be used by applications to populate protected regions of user code and data called enclaves. Once activated, the new hardware protects enclave code and data from outside access and modification. Enclaves provide a place to store secrets and process data with those secrets. SGX has been used, for example, to decrypt video without exposing the decryption keys to nosy debuggers that might be used to subvert DRM. Software has generally been rewritten specifically to run in enclaves, but there are also projects that try to run limited unmodified software in enclaves. Most of the functionality is concentrated into arch/x86/kernel/cpu/sgx/ except the addition of a new mprotect() hook to control enclave page permissions and support for vDSO exceptions fixup which will is used by SGX enclaves. All this work by Sean Christopherson, Jarkko Sakkinen and many others" * tag 'x86_sgx_for_v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (30 commits) x86/sgx: Return -EINVAL on a zero length buffer in sgx_ioc_enclave_add_pages() x86/sgx: Fix a typo in kernel-doc markup x86/sgx: Fix sgx_ioc_enclave_provision() kernel-doc comment x86/sgx: Return -ERESTARTSYS in sgx_ioc_enclave_add_pages() selftests/sgx: Use a statically generated 3072-bit RSA key x86/sgx: Clarify 'laundry_list' locking x86/sgx: Update MAINTAINERS Documentation/x86: Document SGX kernel architecture x86/sgx: Add ptrace() support for the SGX driver x86/sgx: Add a page reclaimer selftests/x86: Add a selftest for SGX x86/vdso: Implement a vDSO for Intel SGX enclave call x86/traps: Attempt to fixup exceptions in vDSO before signaling x86/fault: Add a helper function to sanitize error code x86/vdso: Add support for exception fixup in vDSO functions x86/sgx: Add SGX_IOC_ENCLAVE_PROVISION x86/sgx: Add SGX_IOC_ENCLAVE_INIT x86/sgx: Add SGX_IOC_ENCLAVE_ADD_PAGES x86/sgx: Add SGX_IOC_ENCLAVE_CREATE x86/sgx: Add an SGX misc driver interface ...
2020-12-14Merge tag 'x86_microcode_update_for_v5.11' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 microcode loader update from Borislav Petkov: "This one wins the award for most boring pull request ever. But that's a good thing - this is how I like 'em and the microcode loader *should* be boring. :-) A single cleanup removing "break" after a return statement (Tom Rix)" * tag 'x86_microcode_update_for_v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/microcode/amd: Remove unneeded break
2020-12-14Merge tag 'ras_updates_for_v5.11' of ↵Linus Torvalds7-28/+123
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 RAS updates from Borislav Petkov: - Enable additional logging mode on older Xeons (Tony Luck) - Pass error records logged by firmware through the MCE decoding chain to provide human-readable error descriptions instead of raw values (Smita Koralahalli) - Some #MC handler fixes (Gabriele Paoloni) - The usual small fixes and cleanups all over. * tag 'ras_updates_for_v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mce: Rename kill_it to kill_current_task x86/mce: Remove redundant call to irq_work_queue() x86/mce: Panic for LMCE only if mca_cfg.tolerant < 3 x86/mce: Move the mce_panic() call and 'kill_it' assignments to the right places x86/mce, cper: Pass x86 CPER through the MCA handling chain x86/mce: Use "safe" MSR functions when enabling additional error logging x86/mce: Correct the detection of invalid notifier priorities x86/mce: Assign boolean values to a bool variable x86/mce: Enable additional error logging on certain Intel CPUs x86/mce: Remove unneeded break
2020-12-14Merge tag 'edac_updates_for_v5.11' of ↵Linus Torvalds1-0/+6
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras Pull EDAC updates from Borislav Petkov: "Somewhat busier than usual this cycle: - Add support for AST2400 and AST2600 hw to aspeed_edac (Troy Lee) - Remove an orphaned mv64x60_edac driver. Good riddance (Michael Ellerman) - Add a new igen6 driver for Intel client SoCs with an integrated memory controller and using in-band ECC (Qiuxu Zhuo and Tony Luck) - The usual smattering of fixes and cleanups all over" * tag 'edac_updates_for_v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: EDAC/mv64x60: Remove orphan mv64x60 driver EDAC/aspeed: Add support for AST2400 and AST2600 ARM: dts: aspeed: Add AST2600 EDAC into common devicetree dt-bindings: edac: aspeed-sdram-edac: Add ast2400/ast2600 support EDAC/amd64: Fix PCI component registration EDAC/igen6: ecclog_llist can be static EDAC/i10nm: Add Intel Sapphire Rapids server support EDAC: Add DDR5 new memory type EDAC/i10nm: Use readl() to access MMIO registers MAINTAINERS: Add entry for Intel IGEN6 EDAC driver EDAC/igen6: Add debugfs interface for Intel client SoC EDAC driver EDAC/igen6: Add EDAC driver for Intel client SoCs using IBECC EDAC/synopsys: Return the correct value in mc_probe() MAINTAINERS: Clean up the F: entries for some EDAC drivers EDAC: Add three new memory types EDAC: Fix some kernel-doc markups EDAC: Do not issue useless debug statements in the polling routine EDAC/amd64: Remove unneeded breaks
2020-12-14Merge branch 'linus' of ↵Linus Torvalds58-257/+326
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - Add speed testing on 1420-byte blocks for networking Algorithms: - Improve performance of chacha on ARM for network packets - Improve performance of aegis128 on ARM for network packets Drivers: - Add support for Keem Bay OCS AES/SM4 - Add support for QAT 4xxx devices - Enable crypto-engine retry mechanism in caam - Enable support for crypto engine on sdm845 in qce - Add HiSilicon PRNG driver support" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (161 commits) crypto: qat - add capability detection logic in qat_4xxx crypto: qat - add AES-XTS support for QAT GEN4 devices crypto: qat - add AES-CTR support for QAT GEN4 devices crypto: atmel-i2c - select CONFIG_BITREVERSE crypto: hisilicon/trng - replace atomic_add_return() crypto: keembay - Add support for Keem Bay OCS AES/SM4 dt-bindings: Add Keem Bay OCS AES bindings crypto: aegis128 - avoid spurious references crypto_aegis128_update_simd crypto: seed - remove trailing semicolon in macro definition crypto: x86/poly1305 - Use TEST %reg,%reg instead of CMP $0,%reg crypto: x86/sha512 - Use TEST %reg,%reg instead of CMP $0,%reg crypto: aesni - Use TEST %reg,%reg instead of CMP $0,%reg crypto: cpt - Fix sparse warnings in cptpf hwrng: ks-sa - Add dependency on IOMEM and OF crypto: lib/blake2s - Move selftest prototype into header file crypto: arm/aes-ce - work around Cortex-A57/A72 silion errata crypto: ecdh - avoid unaligned accesses in ecdh_set_secret() crypto: ccree - rework cache parameters handling crypto: cavium - Use dma_set_mask_and_coherent to simplify code crypto: marvell/octeontx - Use dma_set_mask_and_coherent to simplify code ...
2020-12-14Merge tag 'drm-next-2020-12-11' of git://anongit.freedesktop.org/drm/drmLinus Torvalds1-0/+4
Pull drm updates from Dave Airlie: "Not a huge amount of big things here, AMD has support for a few new HW variants (vangogh, green sardine, dimgrey cavefish), Intel has some more DG1 enablement. We have a few big reworks of the TTM layers and interfaces, GEM and atomic internal API reworks cross tree. fbdev is marked orphaned in here as well to reflect the current reality. core: - documentation updates - deprecate DRM_FORMAT_MOD_NONE - atomic crtc enable/disable rework - GEM convert drivers to gem object functions - remove SCATTER_LIST_MAX_SEGMENT sched: - avoid infinite waits ttm: - remove AGP support - don't modify caching for swapout - ttm pinning rework - major TTM reworks - new backend allocator - multihop support vram-helper: - top down BO placement fix - TTM changes - GEM object support displayport: - DP 2.0 DPCD prep work - DP MST extended DPCD caps fbdev: - mark as orphaned amdgpu: - Initial Vangogh support - Green Sardine support - Dimgrey Cavefish support - SG display support for renoir - SMU7 improvements - gfx9+ modiifier support - CI BACO fixes radeon: - expose voltage via hwmon on SUMO amdkfd: - fix unique id handling i915: - more DG1 enablement - bigjoiner support - integer scaling filter support - async flip support - ICL+ DSI command mode - Improve display shutdown - Display refactoring - eLLC machine fbdev loading fix - dma scatterlist fixes - TGL hang fixes - eLLC display buffer caching on SKL+ - MOCS PTE seeting for gen9+ msm: - Shutdown hook - GPU cooling device support - DSI 7nm and 10nm phy/pll updates - sm8150/sm2850 DPU support - GEM locking re-work - LLCC system cache support aspeed: - sysfs output config support ast: - LUT fix - new display mode gma500: - remove 2d framebuffer accel panfrost: - move gpu reset to a worker exynos: - new HDMI mode support mediatek: - MT8167 support - yaml bindings - MIPI DSI phy code moved etnaviv: - new perf counter - more lockdep annotation hibmc: - i2c DDC support ingenic: - pixel clock reset fix - reserved memory support - allow both DMA channels at once - different pixel format support - 30/24/8-bit palette modes tilcdc: - don't keep vblank irq enabled vc4: - new maintainer added - DSI registration fix virtio: - blob resource support - host visible and cross-device support - uuid api support" * tag 'drm-next-2020-12-11' of git://anongit.freedesktop.org/drm/drm: (1754 commits) drm/amdgpu: Initialise drm_gem_object_funcs for imported BOs drm/amdgpu: fix size calculation with stolen vga memory drm/amdgpu: remove amdgpu_ttm_late_init and amdgpu_bo_late_init drm/amdgpu: free the pre-OS console framebuffer after the first modeset drm/amdgpu: enable runtime pm using BACO on CI dGPUs drm/amdgpu/cik: enable BACO reset on Bonaire drm/amd/pm: update smu10.h WORKLOAD_PPLIB setting for raven drm/amd/pm: remove one unsupported smu function for vangogh drm/amd/display: setup system context for APUs drm/amd/display: add S/G support for Vangogh drm/amdkfd: Fix leak in dmabuf import drm/amdgpu: use AMDGPU_NUM_VMID when possible drm/amdgpu: fix sdma instance fw version and feature version init drm/amd/pm: update driver if version for dimgrey_cavefish drm/amd/display: 3.2.115 drm/amd/display: [FW Promotion] Release 0.0.45 drm/amd/display: Revert DCN2.1 dram_clock_change_latency update drm/amd/display: Enable gpu_vm_support for dcn3.01 drm/amd/display: Fixed the audio noise during mode switching with HDCP mode on drm/amd/display: Add wm table for Renoir ...
2020-12-13Merge tag 'x86-urgent-2020-12-13' of ↵Linus Torvalds7-24/+52
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "A set of x86 and membarrier fixes: - Correct a few problems in the x86 and the generic membarrier implementation. Small corrections for assumptions about visibility which have turned out not to be true. - Make the PAT bits for memory encryption correct vs 4K and 2M/1G page table entries as they are at a different location. - Fix a concurrency issue in the the local bandwidth readout of resource control leading to incorrect values - Fix the ordering of allocating a vector for an interrupt. The order missed to respect the provided cpumask when the first attempt of allocating node local in the mask fails. It then tries the node instead of trying the full provided mask first. This leads to erroneous error messages and breaking the (user) supplied affinity request. Reorder it. - Make the INT3 padding detection in optprobe work correctly" * tag 'x86-urgent-2020-12-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/kprobes: Fix optprobe to detect INT3 padding correctly x86/apic/vector: Fix ordering in vector assignment x86/resctrl: Fix incorrect local bandwidth when mba_sc is enabled x86/mm/mem_encrypt: Fix definition of PMD_FLAGS_DEC_WP membarrier: Execute SYNC_CORE on the calling thread membarrier: Explicitly sync remote cores when SYNC_CORE is requested membarrier: Add an actual barrier before rseq_preempt() x86/membarrier: Get rid of a dubious optimization
2020-12-12Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds8-16/+55
Pull kvm fixes from Paolo Bonzini: "Bugfixes for ARM, x86 and tools" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: tools/kvm_stat: Exempt time-based counters KVM: mmu: Fix SPTE encoding of MMIO generation upper half kvm: x86/mmu: Use cpuid to determine max gfn kvm: svm: de-allocate svm_cpu_data for all cpus in svm_cpu_uninit() selftests: kvm/set_memory_region_test: Fix race in move region test KVM: arm64: Add usage of stage 2 fault lookup level in user_mem_abort() KVM: arm64: Fix handling of merging tables into a block entry KVM: arm64: Fix memory leak on stage2 update of a valid PTE
2020-12-12Merge tag 'riscv-for-linus-5.10-rc8' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V fix from Palmer Dabbelt: "Just one fix. It's nothing critical, just a randconfig that wasn't building. That said, it does seem pretty safe and is technically a regression so I'm sending it along for 5.10: - define get_cycles64() all the time, as it's used by most configurations" * tag 'riscv-for-linus-5.10-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: RISC-V: Define get_cycles64() regardless of M-mode
2020-12-12x86/kprobes: Fix optprobe to detect INT3 padding correctlyMasami Hiramatsu1-2/+20
Commit 7705dc855797 ("x86/vmlinux: Use INT3 instead of NOP for linker fill bytes") changed the padding bytes between functions from NOP to INT3. However, when optprobe decodes a target function it finds INT3 and gives up the jump optimization. Instead of giving up any INT3 detection, check whether the rest of the bytes to the end of the function are INT3. If all of them are INT3, those come from the linker. In that case, continue the optprobe jump optimization. [ bp: Massage commit message. ] Fixes: 7705dc855797 ("x86/vmlinux: Use INT3 instead of NOP for linker fill bytes") Reported-by: Adam Zabrocki <pi3@pi3.com.pl> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Reviewed-by: Kees Cook <keescook@chromium.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/160767025681.3880685.16021570341428835411.stgit@devnote2
2020-12-11KVM: mmu: Fix SPTE encoding of MMIO generation upper halfMaciej S. Szmigiero2-9/+20
Commit cae7ed3c2cb0 ("KVM: x86: Refactor the MMIO SPTE generation handling") cleaned up the computation of MMIO generation SPTE masks, however it introduced a bug how the upper part was encoded: SPTE bits 52-61 were supposed to contain bits 10-19 of the current generation number, however a missing shift encoded bits 1-10 there instead (mostly duplicating the lower part of the encoded generation number that then consisted of bits 1-9). In the meantime, the upper part was shrunk by one bit and moved by subsequent commits to become an upper half of the encoded generation number (bits 9-17 of bits 0-17 encoded in a SPTE). In addition to the above, commit 56871d444bc4 ("KVM: x86: fix overlap between SPTE_MMIO_MASK and generation") has changed the SPTE bit range assigned to encode the generation number and the total number of bits encoded but did not update them in the comment attached to their defines, nor in the KVM MMU doc. Let's do it here, too, since it is too trivial thing to warrant a separate commit. Fixes: cae7ed3c2cb0 ("KVM: x86: Refactor the MMIO SPTE generation handling") Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com> Message-Id: <156700708db2a5296c5ed7a8b9ac71f1e9765c85.1607129096.git.maciej.szmigiero@oracle.com> Cc: stable@vger.kernel.org [Reorganize macros so that everything is computed from the bit ranges. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-12-11x86/ia32_signal: Propagate __user annotation properlyLukas Bulwahn1-1/+1
Commit 57d563c82925 ("x86: ia32_setup_rt_frame(): consolidate uaccess areas") dropped a __user annotation in a cast when refactoring __put_user() to unsafe_put_user(). Hence, since then, sparse warns in arch/x86/ia32/ia32_signal.c:350:9: warning: cast removes address space '__user' of expression warning: incorrect type in argument 1 (different address spaces) expected void const volatile [noderef] __user *ptr got unsigned long long [usertype] * Add the __user annotation to restore the propagation of address spaces. Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/20201207124141.21859-1-lukas.bulwahn@gmail.com
2020-12-10RISC-V: Define get_cycles64() regardless of M-modePalmer Dabbelt1-2/+2
The timer driver uses get_cycles64() unconditionally to obtain the current time. A recent refactoring lost the common definition for some configs, which is now the only one we need. Fixes: d5be89a8d118 ("RISC-V: Resurrect the MMIO timer implementation for M-mode systems") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-12-10Merge tag 'powerpc-5.10-6' of ↵Linus Torvalds2-1/+10
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fix from Michael Ellerman: "One commit to implement copy_from_kernel_nofault_allowed(), otherwise copy_from_kernel_nofault() can trigger warnings when accessing bad addresses in some configurations. Thanks to Christophe Leroy and Qian Cai" * tag 'powerpc-5.10-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/mm: Fix KUAP warning by providing copy_from_kernel_nofault_allowed()
2020-12-10x86/apic/vector: Fix ordering in vector assignmentThomas Gleixner1-10/+14
Prarit reported that depending on the affinity setting the ' irq $N: Affinity broken due to vector space exhaustion.' message is showing up in dmesg, but the vector space on the CPUs in the affinity mask is definitely not exhausted. Shung-Hsi provided traces and analysis which pinpoints the problem: The ordering of trying to assign an interrupt vector in assign_irq_vector_any_locked() is simply wrong if the interrupt data has a valid node assigned. It does: 1) Try the intersection of affinity mask and node mask 2) Try the node mask 3) Try the full affinity mask 4) Try the full online mask Obviously #2 and #3 are in the wrong order as the requested affinity mask has to take precedence. In the observed cases #1 failed because the affinity mask did not contain CPUs from node 0. That made it allocate a vector from node 0, thereby breaking affinity and emitting the misleading message. Revert the order of #2 and #3 so the full affinity mask without the node intersection is tried before actually affinity is broken. If no node is assigned then only the full affinity mask and if that fails the full online mask is tried. Fixes: d6ffc6ac83b1 ("x86/vector: Respect affinity mask in irq descriptor") Reported-by: Prarit Bhargava <prarit@redhat.com> Reported-by: Shung-Hsi Yu <shung-hsi.yu@suse.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Shung-Hsi Yu <shung-hsi.yu@suse.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/87ft4djtyp.fsf@nanos.tec.linutronix.de
2020-12-10s390/mm: add support to allocate gigantic hugepages using CMAGerald Schaefer1-0/+3
Commit cf11e85fc08c ("mm: hugetlb: optionally allocate gigantic hugepages using cma") added support for allocating gigantic hugepages using CMA, by specifying the hugetlb_cma= kernel parameter, which will disable any boot-time allocation of gigantic hugepages. This patch enables that option also for s390. Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-12-10s390/crypto: add arch_get_random_long() supportHarald Freudenberger2-2/+113
The random longs to be pulled by arch_get_random_long() are prepared in an 4K buffer which is filled from the NIST 800-90 compliant s390 drbg. By default the random long buffer is refilled 256 times before the drbg itself needs a reseed. The reseed of the drbg is done with 32 bytes fetched from the high quality (but slow) trng which is assumed to deliver 100% entropy. So the 32 * 8 = 256 bits of entropy are spread over 256 * 4KB = 1MB serving 131072 arch_get_random_long() invocations before reseeded. How often the 4K random long buffer is refilled with the drbg before the drbg is reseeded can be adjusted. There is a module parameter 's390_arch_rnd_long_drbg_reseed' accessible via /sys/module/arch_random/parameters/rndlong_drbg_reseed or as kernel command line parameter arch_random.rndlong_drbg_reseed=<value> This parameter tells how often the drbg fills the 4K buffer before it is re-seeded by fresh entropy from the trng. A value of 16 results in reseeding the drbg at every 16 * 4 KB = 64 KB with 32 bytes of fresh entropy pulled from the trng. So a value of 16 would result in 256 bits entropy per 64 KB. A value of 256 results in 1MB of drbg output before a reseed of the drbg is done. So this would spread the 256 bits of entropy among 1MB. Setting this parameter to 0 forces the reseed to take place every time the 4K buffer is depleted, so the entropy rises to 256 bits entropy per 4K or 0.5 bit entropy per arch_get_random_long(). With setting this parameter to negative values all this effort is disabled, arch_get_random long() returns false and thus indicating that the arch_get_random_long() feature is disabled at all. arch_get_random_long() is used by random.c among others to provide an initial hash value to be mixed with the entropy pool on every random data pull. For about 64 bytes read from /dev/urandom there is one call to arch_get_random_long(). So these additional random long values count for performance of /dev/urandom with measurable but low penalty. Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com> Reviewed-by: Juergen Christ <jchrist@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-12-10x86/resctrl: Fix incorrect local bandwidth when mba_sc is enabledXiaochen Shen1-4/+2
The MBA software controller (mba_sc) is a feedback loop which periodically reads MBM counters and tries to restrict the bandwidth below a user-specified value. It tags along the MBM counter overflow handler to do the updates with 1s interval in mbm_update() and update_mba_bw(). The purpose of mbm_update() is to periodically read the MBM counters to make sure that the hardware counter doesn't wrap around more than once between user samplings. mbm_update() calls __mon_event_count() for local bandwidth updating when mba_sc is not enabled, but calls mbm_bw_count() instead when mba_sc is enabled. __mon_event_count() will not be called for local bandwidth updating in MBM counter overflow handler, but it is still called when reading MBM local bandwidth counter file 'mbm_local_bytes', the call path is as below: rdtgroup_mondata_show() mon_event_read() mon_event_count() __mon_event_count() In __mon_event_count(), m->chunks is updated by delta chunks which is calculated from previous MSR value (m->prev_msr) and current MSR value. When mba_sc is enabled, m->chunks is also updated in mbm_update() by mistake by the delta chunks which is calculated from m->prev_bw_msr instead of m->prev_msr. But m->chunks is not used in update_mba_bw() in the mba_sc feedback loop. When reading MBM local bandwidth counter file, m->chunks was changed unexpectedly by mbm_bw_count(). As a result, the incorrect local bandwidth counter which calculated from incorrect m->chunks is shown to the user. Fix this by removing incorrect m->chunks updating in mbm_bw_count() in MBM counter overflow handler, and always calling __mon_event_count() in mbm_update() to make sure that the hardware local bandwidth counter doesn't wrap around. Test steps: # Run workload with aggressive memory bandwidth (e.g., 10 GB/s) git clone https://github.com/intel/intel-cmt-cat && cd intel-cmt-cat && make ./tools/membw/membw -c 0 -b 10000 --read # Enable MBA software controller mount -t resctrl resctrl -o mba_MBps /sys/fs/resctrl # Create control group c1 mkdir /sys/fs/resctrl/c1 # Set MB throttle to 6 GB/s echo "MB:0=6000;1=6000" > /sys/fs/resctrl/c1/schemata # Write PID of the workload to tasks file echo `pidof membw` > /sys/fs/resctrl/c1/tasks # Read local bytes counters twice with 1s interval, the calculated # local bandwidth is not as expected (approaching to 6 GB/s): local_1=`cat /sys/fs/resctrl/c1/mon_data/mon_L3_00/mbm_local_bytes` sleep 1 local_2=`cat /sys/fs/resctrl/c1/mon_data/mon_L3_00/mbm_local_bytes` echo "local b/w (bytes/s):" `expr $local_2 - $local_1` Before fix: local b/w (bytes/s): 11076796416 After fix: local b/w (bytes/s): 5465014272 Fixes: ba0f26d8529c (x86/intel_rdt/mba_sc: Prepare for feedback loop) Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Tony Luck <tony.luck@intel.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/1607063279-19437-1-git-send-email-xiaochen.shen@intel.com
2020-12-10Merge tag 'kvmarm-fixes-5.10-5' of ↵Paolo Bonzini4-3/+31
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD kvm/arm64 fixes for 5.10, take #5 - Don't leak page tables on PTE update - Correctly invalidate TLBs on table to block transition - Only update permissions if the fault level matches the expected mapping size
2020-12-10x86/mm/mem_encrypt: Fix definition of PMD_FLAGS_DEC_WPArvind Sankar2-2/+3
The PAT bit is in different locations for 4k and 2M/1G page table entries. Add a definition for _PAGE_LARGE_CACHE_MASK to represent the three caching bits (PWT, PCD, PAT), similar to _PAGE_CACHE_MASK for 4k pages, and use it in the definition of PMD_FLAGS_DEC_WP to get the correct PAT index for write-protected pages. Fixes: 6ebcb060713f ("x86/mm: Add support to encrypt the kernel in-place") Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Signed-off-by: Borislav Petkov <bp@suse.de> Tested-by: Tom Lendacky <thomas.lendacky@amd.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20201111160946.147341-1-nivedita@alum.mit.edu
2020-12-09Merge tag 'arm-soc-fixes-v5.10-4b' of ↵Linus Torvalds14-22/+18
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "There are a few more PHY mode changes for allwinner SoC based boards with a Realtek PHY after the driver changed its behavior, I assume there will be more of these in the future. Also on for Allwinner, the Banana Pi M2 board had a regression that led to some devices not working because of a slightly incorrect voltage being applied. By popular demand, I picked up a change from Krzysztof Kozlowski to actually list the SoC tree in the MAINTAINERS file. We don't want to get Cc'd on normal patches that are picked up by platform maintainers, but the lack of an entry has led to confusion in the past. All the other changes are fairly benign, fixing boot-time or compile-time warning messages in various places: - A dtc warning on the OLPC XO-1.75 - A boot-time warning on i.MX6 wandboard - A harmless compile-time warning - A regression causing one of the i.MX6 SoCs to be identified as another - Missing SoC identification of Allwinner V3 and S3" * tag 'arm-soc-fixes-v5.10-4b' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: firmware: xilinx: Mark pm_api_features_map with static keyword ARM: dts: mmp2-olpc-xo-1-75: clear the warnings when make dtbs MAINTAINERS: add a limited ARM and ARM64 SoC entry MAINTAINERS: correct SoC Git address (formerly: arm-soc) ARM: keystone: remove SECTION_SIZE_BITS/MAX_PHYSMEM_BITS arm64: dts: allwinner: H5: NanoPi Neo Plus2: phy-mode rgmii-id arm64: dts: allwinner: A64 Sopine: phy-mode rgmii-id ARM: dts: imx6qdl-kontron-samx6i: fix I2C_PM scl pin ARM: dts: imx6qdl-wandboard-revd1: Remove PAD_GPIO_6 from enetgrp ARM: imx: Use correct SRC base address ARM: dts: sun7i: pcduino3-nano: enable RGMII RX/TX delay on PHY ARM: dts: sun8i: v3s: fix GIC node memory range ARM: dts: sun8i: v40: bananapi-m2-berry: Fix ethernet node ARM: dts: sun8i: r40: bananapi-m2-berry: Fix dcdc1 regulator ARM: dts: sun7i: bananapi: Enable RGMII RX/TX delay on Ethernet PHY ARM: dts: s3: pinecube: align compatible property to other S3 boards ARM: sunxi: Add machine match for the Allwinner V3 SoC arm64: dts: allwinner: h6: orangepi-one-plus: Fix ethernet
2020-12-09ARM: dts: mmp2-olpc-xo-1-75: clear the warnings when make dtbsZhen Lei1-2/+1
The check_spi_bus_bridge() in scripts/dtc/checks.c requires that the node have "spi-slave" property must with "#address-cells = <0>" and "#size-cells = <0>". But currently both "#address-cells" and "#size-cells" properties are deleted, the corresponding default values are 2 and 1. As a result, the check fails and below warnings is displayed. arch/arm/boot/dts/mmp2.dtsi:472.23-480.6: Warning (spi_bus_bridge): \ /soc/apb@d4000000/spi@d4037000: incorrect #address-cells for SPI bus also defined at arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts:225.7-237.3 arch/arm/boot/dts/mmp2.dtsi:472.23-480.6: Warning (spi_bus_bridge): \ /soc/apb@d4000000/spi@d4037000: incorrect #size-cells for SPI bus also defined at arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts:225.7-237.3 arch/arm/boot/dts/mmp2-olpc-xo-1-75.dtb: Warning (spi_bus_reg): \ Failed prerequisite 'spi_bus_bridge' Because the value of "#size-cells" is already defined as zero in the node "ssp3: spi@d4037000" in arch/arm/boot/dts/mmp2.dtsi. So we only need to explicitly add "#address-cells = <0>" and keep "#size-cells" no change. Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Link: https://lore.kernel.org/r/20201207084752.1665-2-thunder.leizhen@huawei.com' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-09s390/smp: perform initial CPU reset also for SMT siblingsSven Schnelle1-15/+3
Not resetting the SMT siblings might leave them in unpredictable state. One of the observed problems was that the CPU timer wasn't reset and therefore large system time values where accounted during CPU bringup. Cc: <stable@kernel.org> # 4.0 Fixes: 10ad34bc76dfb ("s390: add SMT support") Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-12-09s390/mm: use invalid asce for user space when switching to init_mmHeiko Carstens1-1/+4
Currently only idle_task_exit() explicitly switches (switch_mm) to init_mm. This causes the kernel asce to be loaded into cr7 and therefore it would be used for potential user space accesses. This is currently no problem since idle_task_exit() is nearly the last thing a CPU executes before it is taken down. However things might change - and therefore make sure that always the invalid asce is used for cr7 when active_mm is init_mm. This makes sure that all potential user space accesses will fail, instead of accessing kernel address space. Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-12-09s390/idle: fix accounting with machine checksSven Schnelle1-6/+6
When a machine check interrupt is triggered during idle, the code is using the async timer/clock for idle time calculation. It should use the machine check enter timer/clock which is passed to the macro. Fixes: 0b0ed657fe00 ("s390: remove critical section cleanup from entry.S") Cc: <stable@vger.kernel.org> # 5.8 Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-12-09s390/idle: add missing mt_cycles calculationSven Schnelle1-9/+25
During removal of the critical section cleanup the calculation of mt_cycles during idle was removed. This causes invalid accounting on systems with SMT enabled. Fixes: 0b0ed657fe00 ("s390: remove critical section cleanup from entry.S") Cc: <stable@vger.kernel.org> # 5.8 Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-12-09s390/boot: add build-id to decompressorPhilipp Rudo2-1/+2
More and more functionality from the early boot phase gets carried over to the decompressor. With this the complexity of the code and thus the chance to introduce bugs increases. In order to be able to debug these early boot bugs the distributions have to package the decompressors vmlinux together with the other debuginfos. However for that the distributions require the vmlinux to contain a build-id. Per default the section containing the build-id is placed first in the section table. So make sure to move it behind the .text section otherwise the image would be unbootable. Signed-off-by: Philipp Rudo <prudo@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-12-09s390/kexec_file: fix diag308 subcode when loading crash kernelPhilipp Rudo1-4/+5
diag308 subcode 0 performes a clear reset which inlcudes the reset of all registers in the system. While this is the preferred behavior when loading a normal kernel via kexec it prevents the crash kernel to store the register values in the dump. To prevent this use subcode 1 when loading a crash kernel instead. Fixes: ee337f5469fd ("s390/kexec_file: Add crash support to image loader") Cc: <stable@vger.kernel.org> # 4.17 Signed-off-by: Philipp Rudo <prudo@linux.ibm.com> Reported-by: Xiaoying Yan <yiyan@redhat.com> Tested-by: Lianbo Jiang <lijiang@redhat.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-12-09x86/membarrier: Get rid of a dubious optimizationAndy Lutomirski2-6/+13
sync_core_before_usermode() had an incorrect optimization. If the kernel returns from an interrupt, it can get to usermode without IRET. It just has to schedule to a different task in the same mm and do SYSRET. Fortunately, there were no callers of sync_core_before_usermode() that could have had in_irq() or in_nmi() equal to true, because it's only ever called from the scheduler. While at it, clarify a related comment. Fixes: 70216e18e519 ("membarrier: Provide core serializing command, *_SYNC_CORE") Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/5afc7632be1422f91eaf7611aaaa1b5b8580a086.1607058304.git.luto@kernel.org
2020-12-09Merge tag 'sunxi-fixes-for-5.10-3' of ↵Arnd Bergmann2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes A few more RGMII-ID fixes * tag 'sunxi-fixes-for-5.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm64: dts: allwinner: H5: NanoPi Neo Plus2: phy-mode rgmii-id arm64: dts: allwinner: A64 Sopine: phy-mode rgmii-id Link: https://lore.kernel.org/r/2a351c9c-470f-4c5e-ba37-80065ae0586d.lettre@localhost Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-08Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds1-1/+1
Pull sparc64 csum fix from Al Viro: "Fix for a brown paperbag regression in sparc64" * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: [regression fix] really dumb fuckup in sparc64 __csum_partial_copy() changes
2020-12-08[regression fix] really dumb fuckup in sparc64 __csum_partial_copy() changesAl Viro1-1/+1
~0U is -1, not 1 Reported-by: Anatoly Pugachev <matorola@gmail.com> Tested-by: Anatoly Pugachev <matorola@gmail.com> Fixes: fdf8bee96f9a "sparc64: propagate the calling convention changes down to __csum_partial_copy_...()" X-brown-paperbag: yes Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-12-08x86/cpu/amd: Remove dead code for TSEG region remappingArvind Sankar2-41/+0
Commit 26bfa5f89486 ("x86, amd: Cleanup init_amd") moved the code that remaps the TSEG region using 4k pages from init_amd() to bsp_init_amd(). However, bsp_init_amd() is executed well before the direct mapping is actually created: setup_arch() -> early_cpu_init() -> early_identify_cpu() -> this_cpu->c_bsp_init() -> bsp_init_amd() ... -> init_mem_mapping() So the change effectively disabled the 4k remapping, because pfn_range_is_mapped() is always false at this point. It has been over six years since the commit, and no-one seems to have noticed this, so just remove the code. The original code was also incomplete, since it doesn't check how large the TSEG address range actually is, so it might remap only part of it in any case. Hygon has copied the incorrect version, so the code has never run on it since the cpu support was added two years ago. Remove it from there as well. Committer notes: This workaround is incomplete anyway: 1. The code must check MSRC001_0113.TValid (SMM TSeg Mask MSR) first, to check whether the TSeg address range is enabled. 2. The code must check whether the range is not 2M aligned - if it is, there's nothing to work around. 3. In all the BIOSes tested, the TSeg range is in a e820 reserved area and those are not mapped anymore, after 66520ebc2df3 ("x86, mm: Only direct map addresses that are marked as E820_RAM") which means, there's nothing to be worked around either. So let's rip it out. Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/20201127171324.1846019-1-nivedita@alum.mit.edu
2020-12-08x86/msr: Add a pointer to an URL which contains further detailsBorislav Petkov1-1/+2
After having collected the majority of reports about MSRs being written by userspace tools and what tools those are, and all newer reports mostly repeating, add an URL where detailed information is gathered and kept up-to-date. Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/20201205002825.19107-1-bp@alien8.de
2020-12-08powerpc/mm: Fix KUAP warning by providing copy_from_kernel_nofault_allowed()Christophe Leroy2-1/+10
Since commit c33165253492 ("powerpc: use non-set_fs based maccess routines"), userspace access is not granted anymore when using copy_from_kernel_nofault() However, kthread_probe_data() uses copy_from_kernel_nofault() to check validity of pointers. When the pointer is NULL, it points to userspace, leading to a KUAP fault and triggering the following big hammer warning many times when you request a sysrq "show task": [ 1117.202054] ------------[ cut here ]------------ [ 1117.202102] Bug: fault blocked by AP register ! [ 1117.202261] WARNING: CPU: 0 PID: 377 at arch/powerpc/include/asm/nohash/32/kup-8xx.h:66 do_page_fault+0x4a8/0x5ec [ 1117.202310] Modules linked in: [ 1117.202428] CPU: 0 PID: 377 Comm: sh Tainted: G W 5.10.0-rc5-01340-g83f53be2de31-dirty #4175 [ 1117.202499] NIP: c0012048 LR: c0012048 CTR: 00000000 [ 1117.202573] REGS: cacdbb88 TRAP: 0700 Tainted: G W (5.10.0-rc5-01340-g83f53be2de31-dirty) [ 1117.202625] MSR: 00021032 <ME,IR,DR,RI> CR: 24082222 XER: 20000000 [ 1117.202899] [ 1117.202899] GPR00: c0012048 cacdbc40 c2929290 00000023 c092e554 00000001 c09865e8 c092e640 [ 1117.202899] GPR08: 00001032 00000000 00000000 00014efc 28082224 100d166a 100a0920 00000000 [ 1117.202899] GPR16: 100cac0c 100b0000 1080c3fc 1080d685 100d0000 100d0000 00000000 100a0900 [ 1117.202899] GPR24: 100d0000 c07892ec 00000000 c0921510 c21f4440 0000005c c0000000 cacdbc80 [ 1117.204362] NIP [c0012048] do_page_fault+0x4a8/0x5ec [ 1117.204461] LR [c0012048] do_page_fault+0x4a8/0x5ec [ 1117.204509] Call Trace: [ 1117.204609] [cacdbc40] [c0012048] do_page_fault+0x4a8/0x5ec (unreliable) [ 1117.204771] [cacdbc70] [c00112f0] handle_page_fault+0x8/0x34 [ 1117.204911] --- interrupt: 301 at copy_from_kernel_nofault+0x70/0x1c0 [ 1117.204979] NIP: c010dbec LR: c010dbac CTR: 00000001 [ 1117.205053] REGS: cacdbc80 TRAP: 0301 Tainted: G W (5.10.0-rc5-01340-g83f53be2de31-dirty) [ 1117.205104] MSR: 00009032 <EE,ME,IR,DR,RI> CR: 28082224 XER: 00000000 [ 1117.205416] DAR: 0000005c DSISR: c0000000 [ 1117.205416] GPR00: c0045948 cacdbd38 c2929290 00000001 00000017 00000017 00000027 0000000f [ 1117.205416] GPR08: c09926ec 00000000 00000000 3ffff000 24082224 [ 1117.206106] NIP [c010dbec] copy_from_kernel_nofault+0x70/0x1c0 [ 1117.206202] LR [c010dbac] copy_from_kernel_nofault+0x30/0x1c0 [ 1117.206258] --- interrupt: 301 [ 1117.206372] [cacdbd38] [c004bbb0] kthread_probe_data+0x44/0x70 (unreliable) [ 1117.206561] [cacdbd58] [c0045948] print_worker_info+0xe0/0x194 [ 1117.206717] [cacdbdb8] [c00548ac] sched_show_task+0x134/0x168 [ 1117.206851] [cacdbdd8] [c005a268] show_state_filter+0x70/0x100 [ 1117.206989] [cacdbe08] [c039baa0] sysrq_handle_showstate+0x14/0x24 [ 1117.207122] [cacdbe18] [c039bf18] __handle_sysrq+0xac/0x1d0 [ 1117.207257] [cacdbe48] [c039c0c0] write_sysrq_trigger+0x4c/0x74 [ 1117.207407] [cacdbe68] [c01fba48] proc_reg_write+0xb4/0x114 [ 1117.207550] [cacdbe88] [c0179968] vfs_write+0x12c/0x478 [ 1117.207686] [cacdbf08] [c0179e60] ksys_write+0x78/0x128 [ 1117.207826] [cacdbf38] [c00110d0] ret_from_syscall+0x0/0x34 [ 1117.207938] --- interrupt: c01 at 0xfd4e784 [ 1117.208008] NIP: 0fd4e784 LR: 0fe0f244 CTR: 10048d38 [ 1117.208083] REGS: cacdbf48 TRAP: 0c01 Tainted: G W (5.10.0-rc5-01340-g83f53be2de31-dirty) [ 1117.208134] MSR: 0000d032 <EE,PR,ME,IR,DR,RI> CR: 44002222 XER: 00000000 [ 1117.208470] [ 1117.208470] GPR00: 00000004 7fc34090 77bfb4e0 00000001 1080fa40 00000002 7400000f fefefeff [ 1117.208470] GPR08: 7f7f7f7f 10048d38 1080c414 7fc343c0 00000000 [ 1117.209104] NIP [0fd4e784] 0xfd4e784 [ 1117.209180] LR [0fe0f244] 0xfe0f244 [ 1117.209236] --- interrupt: c01 [ 1117.209274] Instruction dump: [ 1117.209353] 714a4000 418200f0 73ca0001 40820084 73ca0032 408200f8 73c90040 4082ff60 [ 1117.209727] 0fe00000 3c60c082 386399f4 48013b65 <0fe00000> 80010034 3860000b 7c0803a6 [ 1117.210102] ---[ end trace 1927c0323393af3e ]--- To avoid that, copy_from_kernel_nofault_allowed() is used to check whether the address is a valid kernel address. But the default version of it returns true for any address. Provide a powerpc version of copy_from_kernel_nofault_allowed() that returns false when the address is below TASK_USER_MAX, so that copy_from_kernel_nofault() will return -ERANGE. Fixes: c33165253492 ("powerpc: use non-set_fs based maccess routines") Reported-by: Qian Cai <qcai@redhat.com> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/18bcb456d32a3e74f5ae241fd6f1580c092d07f5.1607360230.git.christophe.leroy@csgroup.eu

Privacy Policy