path: root/drivers/s390
AgeCommit message (Collapse)AuthorFilesLines
2020-08-23treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva6-11/+11
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-08-22Merge tag 's390-5.9-3' of ↵Linus Torvalds1-0/+5
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Vasily Gorbik: - a couple of fixes for storage key handling relevant for debugging - add cond_resched into potentially slow subchannels scanning loop - fixes for PF/VF linking and to ignore stale PCI configuration request events * tag 's390-5.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/pci: fix PF/VF linking on hot plug s390/pci: re-introduce zpci_remove_device() s390/pci: fix zpci_bus_link_virtfn() s390/ptrace: fix storage key handling s390/runtime_instrumentation: fix storage key handling s390/pci: ignore stale configuration request event s390/cio: add cond_resched() in the slow_eval_known_fn() loop
2020-08-17scsi: zfcp: Fix use-after-free in request timeout handlersSteffen Maier1-2/+2
Before v4.15 commit 75492a51568b ("s390/scsi: Convert timers to use timer_setup()"), we intentionally only passed zfcp_adapter as context argument to zfcp_fsf_request_timeout_handler(). Since we only trigger adapter recovery, it was unnecessary to sync against races between timeout and (late) completion. Likewise, we only passed zfcp_erp_action as context argument to zfcp_erp_timeout_handler(). Since we only wakeup an ERP action, it was unnecessary to sync against races between timeout and (late) completion. Meanwhile the timeout handlers get timer_list as context argument and do a timer-specific container-of to zfcp_fsf_req which can have been freed. Fix it by making sure that any request timeout handlers, that might just have started before del_timer(), are completed by using del_timer_sync() instead. This ensures the request free happens afterwards. Space time diagram of potential use-after-free: Basic idea is to have 2 or more pending requests whose timeouts run out at almost the same time. req 1 timeout ERP thread req 2 timeout ---------------- ---------------- --------------------------------------- zfcp_fsf_request_timeout_handler fsf_req = from_timer(fsf_req, t, timer) adapter = fsf_req->adapter zfcp_qdio_siosl(adapter) zfcp_erp_adapter_reopen(adapter,...) zfcp_erp_strategy ... zfcp_fsf_req_dismiss_all list_for_each_entry_safe zfcp_fsf_req_complete 1 del_timer 1 zfcp_fsf_req_free 1 zfcp_fsf_req_complete 2 zfcp_fsf_request_timeout_handler del_timer 2 fsf_req = from_timer(fsf_req, t, timer) zfcp_fsf_req_free 2 adapter = fsf_req->adapter ^^^^^^^ already freed Link: https://lore.kernel.org/r/20200813152856.50088-1-maier@linux.ibm.com Fixes: 75492a51568b ("s390/scsi: Convert timers to use timer_setup()") Cc: <stable@vger.kernel.org> #4.15+ Suggested-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Steffen Maier <maier@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-17s390/cio: add cond_resched() in the slow_eval_known_fn() loopVineeth Vijayan1-0/+5
The scanning through subchannels during the time of an event could take significant amount of time in case of platforms with lots of known subchannels. This might result in higher scheduling latencies for other tasks especially on systems with a single CPU. Add cond_resched() call, as the loop in slow_eval_known_fn() can be executed for a longer duration. Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-08-11s390/pkey: remove redundant variable initializationTianjia Zhang1-2/+2
In the first place, the initialization value of `rc` is wrong. It is unnecessary to initialize `rc` variables, so remove their initialization operation. Fixes: f2bbc96e7cfad ("s390/pkey: add CCA AES cipher key support") Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-08-07Merge branch 'akpm' (patches from Andrew)Linus Torvalds1-2/+2
Merge misc updates from Andrew Morton: - a few MM hotfixes - kthread, tools, scripts, ntfs and ocfs2 - some of MM Subsystems affected by this patch series: kthread, tools, scripts, ntfs, ocfs2 and mm (hofixes, pagealloc, slab-generic, slab, slub, kcsan, debug, pagecache, gup, swap, shmem, memcg, pagemap, mremap, mincore, sparsemem, vmalloc, kasan, pagealloc, hugetlb and vmscan). * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (162 commits) mm: vmscan: consistent update to pgrefill mm/vmscan.c: fix typo khugepaged: khugepaged_test_exit() check mmget_still_valid() khugepaged: retract_page_tables() remember to test exit khugepaged: collapse_pte_mapped_thp() protect the pmd lock khugepaged: collapse_pte_mapped_thp() flush the right range mm/hugetlb: fix calculation of adjust_range_if_pmd_sharing_possible mm: thp: replace HTTP links with HTTPS ones mm/page_alloc: fix memalloc_nocma_{save/restore} APIs mm/page_alloc.c: skip setting nodemask when we are in interrupt mm/page_alloc: fallbacks at most has 3 elements mm/page_alloc: silence a KASAN false positive mm/page_alloc.c: remove unnecessary end_bitidx for [set|get]_pfnblock_flags_mask() mm/page_alloc.c: simplify pageblock bitmap access mm/page_alloc.c: extract the common part in pfn_to_bitidx() mm/page_alloc.c: replace the definition of NR_MIGRATETYPE_BITS with PB_migratetype_bits mm/shuffle: remove dynamic reconfiguration mm/memory_hotplug: document why shuffle_zone() is relevant mm/page_alloc: remove nr_free_pagecache_pages() mm: remove vm_total_pages ...
2020-08-07mm, treewide: rename kzfree() to kfree_sensitive()Waiman Long1-2/+2
As said by Linus: A symmetric naming is only helpful if it implies symmetries in use. Otherwise it's actively misleading. In "kzalloc()", the z is meaningful and an important part of what the caller wants. In "kzfree()", the z is actively detrimental, because maybe in the future we really _might_ want to use that "memfill(0xdeadbeef)" or something. The "zero" part of the interface isn't even _relevant_. The main reason that kzfree() exists is to clear sensitive information that should not be leaked to other future users of the same memory objects. Rename kzfree() to kfree_sensitive() to follow the example of the recently added kvfree_sensitive() and make the intention of the API more explicit. In addition, memzero_explicit() is used to clear the memory to make sure that it won't get optimized away by the compiler. The renaming is done by using the command sequence: git grep -w --name-only kzfree |\ xargs sed -i 's/kzfree/kfree_sensitive/' followed by some editing of the kfree_sensitive() kerneldoc and adding a kzfree backward compatibility macro in slab.h. [akpm@linux-foundation.org: fs/crypto/inline_crypt.c needs linux/slab.h] [akpm@linux-foundation.org: fix fs/crypto/inline_crypt.c some more] Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Waiman Long <longman@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: David Howells <dhowells@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Cc: James Morris <jmorris@namei.org> Cc: "Serge E. Hallyn" <serge@hallyn.com> Cc: Joe Perches <joe@perches.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: David Rientjes <rientjes@google.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: "Jason A . Donenfeld" <Jason@zx2c4.com> Link: http://lkml.kernel.org/r/20200616154311.12314-3-longman@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-06Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds4-8/+10
Pull SCSI updates from James Bottomley: "This consists of the usual driver updates (ufs, qla2xxx, tcmu, lpfc, hpsa, zfcp, scsi_debug) and minor bug fixes. We also have a huge docbook fix update like most other subsystems and no major update to the core (the few non trivial updates are either minor fixes or removing an unused feature [scsi_sdb_cache])" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (307 commits) scsi: scsi_transport_srp: Sanitize scsi_target_block/unblock sequences scsi: ufs-mediatek: Apply DELAY_AFTER_LPM quirk to Micron devices scsi: ufs: Introduce device quirk "DELAY_AFTER_LPM" scsi: virtio-scsi: Correctly handle the case where all LUNs are unplugged scsi: scsi_debug: Implement tur_ms_to_ready parameter scsi: scsi_debug: Fix request sense scsi: lpfc: Fix typo in comment for ULP scsi: ufs-mediatek: Prevent LPM operation on undeclared VCC scsi: iscsi: Do not put host in iscsi_set_flashnode_param() scsi: hpsa: Correct ctrl queue depth scsi: target: tcmu: Make TMR notification optional scsi: target: tcmu: Implement tmr_notify callback scsi: target: tcmu: Fix and simplify timeout handling scsi: target: tcmu: Factor out new helper ring_insert_padding scsi: target: tcmu: Do not queue aborted commands scsi: target: tcmu: Use priv pointer in se_cmd scsi: target: Add tmr_notify backend function scsi: target: Modify core_tmr_abort_task() scsi: target: iscsi: Fix inconsistent debug message scsi: target: iscsi: Fix login error when receiving ...
2020-08-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextLinus Torvalds8-199/+169
Pull networking updates from David Miller: 1) Support 6Ghz band in ath11k driver, from Rajkumar Manoharan. 2) Support UDP segmentation in code TSO code, from Eric Dumazet. 3) Allow flashing different flash images in cxgb4 driver, from Vishal Kulkarni. 4) Add drop frames counter and flow status to tc flower offloading, from Po Liu. 5) Support n-tuple filters in cxgb4, from Vishal Kulkarni. 6) Various new indirect call avoidance, from Eric Dumazet and Brian Vazquez. 7) Fix BPF verifier failures on 32-bit pointer arithmetic, from Yonghong Song. 8) Support querying and setting hardware address of a port function via devlink, use this in mlx5, from Parav Pandit. 9) Support hw ipsec offload on bonding slaves, from Jarod Wilson. 10) Switch qca8k driver over to phylink, from Jonathan McDowell. 11) In bpftool, show list of processes holding BPF FD references to maps, programs, links, and btf objects. From Andrii Nakryiko. 12) Several conversions over to generic power management, from Vaibhav Gupta. 13) Add support for SO_KEEPALIVE et al. to bpf_setsockopt(), from Dmitry Yakunin. 14) Various https url conversions, from Alexander A. Klimov. 15) Timestamping and PHC support for mscc PHY driver, from Antoine Tenart. 16) Support bpf iterating over tcp and udp sockets, from Yonghong Song. 17) Support 5GBASE-T i40e NICs, from Aleksandr Loktionov. 18) Add kTLS RX HW offload support to mlx5e, from Tariq Toukan. 19) Fix the ->ndo_start_xmit() return type to be netdev_tx_t in several drivers. From Luc Van Oostenryck. 20) XDP support for xen-netfront, from Denis Kirjanov. 21) Support receive buffer autotuning in MPTCP, from Florian Westphal. 22) Support EF100 chip in sfc driver, from Edward Cree. 23) Add XDP support to mvpp2 driver, from Matteo Croce. 24) Support MPTCP in sock_diag, from Paolo Abeni. 25) Commonize UDP tunnel offloading code by creating udp_tunnel_nic infrastructure, from Jakub Kicinski. 26) Several pci_ --> dma_ API conversions, from Christophe JAILLET. 27) Add FLOW_ACTION_POLICE support to mlxsw, from Ido Schimmel. 28) Add SK_LOOKUP bpf program type, from Jakub Sitnicki. 29) Refactor a lot of networking socket option handling code in order to avoid set_fs() calls, from Christoph Hellwig. 30) Add rfc4884 support to icmp code, from Willem de Bruijn. 31) Support TBF offload in dpaa2-eth driver, from Ioana Ciornei. 32) Support XDP_REDIRECT in qede driver, from Alexander Lobakin. 33) Support PCI relaxed ordering in mlx5 driver, from Aya Levin. 34) Support TCP syncookies in MPTCP, from Flowian Westphal. 35) Fix several tricky cases of PMTU handling wrt. briding, from Stefano Brivio. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2056 commits) net: thunderx: initialize VF's mailbox mutex before first usage usb: hso: remove bogus check for EINPROGRESS usb: hso: no complaint about kmalloc failure hso: fix bailout in error case of probe ip_tunnel_core: Fix build for archs without _HAVE_ARCH_IPV6_CSUM selftests/net: relax cpu affinity requirement in msg_zerocopy test mptcp: be careful on subflow creation selftests: rtnetlink: make kci_test_encap() return sub-test result selftests: rtnetlink: correct the final return value for the test net: dsa: sja1105: use detected device id instead of DT one on mismatch tipc: set ub->ifindex for local ipv6 address ipv6: add ipv6_dev_find() net: openvswitch: silence suspicious RCU usage warning Revert "vxlan: fix tos value before xmit" ptp: only allow phase values lower than 1 period farsync: switch from 'pci_' to 'dma_' API wan: wanxl: switch from 'pci_' to 'dma_' API hv_netvsc: do not use VF device if link is down dpaa2-eth: Fix passing zero to 'PTR_ERR' warning net: macb: Properly handle phylink on at91sam9x ...
2020-08-05Merge tag 'for-5.9/drivers-20200803' of git://git.kernel.dk/linux-blockLinus Torvalds1-13/+20
Pull block driver updates from Jens Axboe: - NVMe: - ZNS support (Aravind, Keith, Matias, Niklas) - Misc cleanups, optimizations, fixes (Baolin, Chaitanya, David, Dongli, Max, Sagi) - null_blk zone capacity support (Aravind) - MD: - raid5/6 fixes (ChangSyun) - Warning fixes (Damien) - raid5 stripe fixes (Guoqing, Song, Yufen) - sysfs deadlock fix (Junxiao) - raid10 deadlock fix (Vitaly) - struct_size conversions (Gustavo) - Set of bcache updates/fixes (Coly) * tag 'for-5.9/drivers-20200803' of git://git.kernel.dk/linux-block: (117 commits) md/raid5: Allow degraded raid6 to do rmw md/raid5: Fix Force reconstruct-write io stuck in degraded raid5 raid5: don't duplicate code for different paths in handle_stripe raid5-cache: hold spinlock instead of mutex in r5c_journal_mode_show md: print errno in super_written md/raid5: remove the redundant setting of STRIPE_HANDLE md: register new md sysfs file 'uuid' read-only md: fix max sectors calculation for super 1.0 nvme-loop: remove extra variable in create ctrl nvme-loop: set ctrl state connecting after init nvme-multipath: do not fall back to __nvme_find_path() for non-optimized paths nvme-multipath: fix logic for non-optimized paths nvme-rdma: fix controller reset hang during traffic nvme-tcp: fix controller reset hang during traffic nvmet: introduce the passthru Kconfig option nvmet: introduce the passthru configfs interface nvmet: Add passthru enable/disable helpers nvmet: add passthru code to process commands nvme: export nvme_find_get_ns() and nvme_put_ns() nvme: introduce nvme_ctrl_get_by_path() ...
2020-08-04Merge tag 'tasklets-v5.9-rc1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull tasklets API update from Kees Cook: "These are the infrastructure updates needed to support converting the tasklet API to something more modern (and hopefully for removal further down the road). There is a 300-patch series waiting in the wings to get set out to subsystem maintainers, but these changes need to be present in the kernel first. Since this has some treewide changes, I carried this series for -next instead of paining Thomas with it in -tip, but it's got his Ack. This is similar to the timer_struct modernization from a while back, but not nearly as messy (I hope). :) - Prepare for tasklet API modernization (Romain Perier, Allen Pais, Kees Cook)" * tag 'tasklets-v5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: tasklet: Introduce new initialization API treewide: Replace DECLARE_TASKLET() with DECLARE_TASKLET_OLD() usb: gadget: udc: Avoid tasklet passing a global
2020-08-03Merge tag 's390-5.9-1' of ↵Linus Torvalds18-631/+685
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Heiko Carstens: - Add support for function error injection. - Add support for custom exception handlers, as required by BPF_PROBE_MEM. - Add support for BPF_PROBE_MEM. - Add trace events for idle enter / exit for the s390 specific idle implementation. - Remove unused zcore memmmap device. - Remove unused "raw view" from s390 debug feature. - AP bus + zcrypt device driver code refactoring. - Provide cex4 cca sysfs attributes for cex3 for zcrypt device driver. - Expose only minimal interface to walk physmem for mm/memblock. This is a common code change and it has been agreed on with Mike Rapoport and Andrew Morton that this can go upstream via the s390 tree. - Rework of the s390 vmem/vmmemap code to allow for future memory hot remove. - Get rid of FORCE_MAX_ZONEORDER to finally allow for order-10 allocations again, instead of only order-8 allocations. - Various small improvements and fixes. * tag 's390-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (48 commits) s390/vmemmap: coding style updates s390/vmemmap: avoid memset(PAGE_UNUSED) when adding consecutive sections s390/vmemmap: remember unused sub-pmd ranges s390/vmemmap: fallback to PTEs if mapping large PMD fails s390/vmem: cleanup empty page tables s390/vmemmap: take the vmem_mutex when populating/freeing s390/vmemmap: cleanup when vmemmap_populate() fails s390/vmemmap: extend modify_pagetable() to handle vmemmap s390/vmem: consolidate vmem_add_range() and vmem_remove_range() s390/vmem: rename vmem_add_mem() to vmem_add_range() s390: enable HAVE_FUNCTION_ERROR_INJECTION s390/pci: clarify comment in s390_mmio_read/write s390/time: improve comparison for tod steering s390/time: select CLOCKSOURCE_VALIDATE_LAST_CYCLE s390/time: use CLOCKSOURCE_MASK s390/bpf: implement BPF_PROBE_MEM s390/kernel: expand exception table logic to allow new handling options s390/kernel: unify EX_TABLE* implementations s390/mm: allow order 10 allocations s390/mm: avoid trimming to MAX_ORDER ...
2020-08-03Merge tag 'for-5.9/block-20200802' of git://git.kernel.dk/linux-blockLinus Torvalds4-13/+12
Pull core block updates from Jens Axboe: "Good amount of cleanups and tech debt removals in here, and as a result, the diffstat shows a nice net reduction in code. - Softirq completion cleanups (Christoph) - Stop using ->queuedata (Christoph) - Cleanup bd claiming (Christoph) - Use check_events, moving away from the legacy media change (Christoph) - Use inode i_blkbits consistently (Christoph) - Remove old unused writeback congestion bits (Christoph) - Cleanup/unify submission path (Christoph) - Use bio_uninit consistently, instead of bio_disassociate_blkg (Christoph) - sbitmap cleared bits handling (John) - Request merging blktrace event addition (Jan) - sysfs add/remove race fixes (Luis) - blk-mq tag fixes/optimizations (Ming) - Duplicate words in comments (Randy) - Flush deferral cleanup (Yufen) - IO context locking/retry fixes (John) - struct_size() usage (Gustavo) - blk-iocost fixes (Chengming) - blk-cgroup IO stats fixes (Boris) - Various little fixes" * tag 'for-5.9/block-20200802' of git://git.kernel.dk/linux-block: (135 commits) block: blk-timeout: delete duplicated word block: blk-mq-sched: delete duplicated word block: blk-mq: delete duplicated word block: genhd: delete duplicated words block: elevator: delete duplicated word and fix typos block: bio: delete duplicated words block: bfq-iosched: fix duplicated word iocost_monitor: start from the oldest usage index iocost: Fix check condition of iocg abs_vdebt block: Remove callback typedefs for blk_mq_ops block: Use non _rcu version of list functions for tag_set_list blk-cgroup: show global disk stats in root cgroup io.stat blk-cgroup: make iostat functions visible to stat printing block: improve discard bio alignment in __blkdev_issue_discard() block: change REQ_OP_ZONE_RESET and REQ_OP_ZONE_RESET_ALL to be odd numbers block: defer flush request no matter whether we have elevator block: make blk_timeout_init() static block: remove retry loop in ioc_release_fn() block: remove unnecessary ioc nested locking block: integrate bd_start_claiming into __blkdev_get ...
2020-07-31s390/qeth: use all configured RX buffersJulian Wiedmann1-12/+4
The (misplaced) comment doesn't make any sense, enforcing an uninitialized RX buffer won't help with IRQ reduction. So make the best use of all available RX buffers. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-31s390/qeth: don't process empty bridge port eventsJulian Wiedmann1-0/+4
Discard events that don't contain any entries. This shouldn't happen, but subsequent code relies on being able to use entry 0. So better be safe than accessing garbage. Fixes: b4d72c08b358 ("qeth: bridgeport support - basic control") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-31s390/qeth: integrate RX refill worker with NAPIJulian Wiedmann4-18/+26
Running a RX refill outside of NAPI context is inherently racy, even though the worker is only started for an entirely idle RX ring. >From the moment that the worker has replenished parts of the RX ring, the HW can use those RX buffers, raise an IRQ and cause our NAPI code to run concurrently to the RX refill worker. Instead let the worker schedule our NAPI instance, and refill the RX ring from there. Keeping accurate count of how many buffers still need to be refilled also removes some quirky arithmetic from the low-level code. Fixes: b333293058aa ("qeth: add support for af_iucv HiperSockets transport") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-31s390/qeth: tolerate pre-filled RX bufferJulian Wiedmann1-6/+14
When preparing a buffer for RX refill, tolerate that it already has a pool_entry attached. Otherwise we could easily leak such a pool_entry when re-driving the RX refill after an error (from eg. do_qdio()). This needs some minor adjustment in the code that drains RX buffer(s) prior to RX refill and during teardown, so that ->pool_entry is NULLed accordingly. Fixes: 4a71df50047f ("qeth: new qeth device driver") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-30treewide: Replace DECLARE_TASKLET() with DECLARE_TASKLET_OLD()Kees Cook1-1/+1
This converts all the existing DECLARE_TASKLET() (and ...DISABLED) macros with DECLARE_TASKLET_OLD() in preparation for refactoring the tasklet callback type. All existing DECLARE_TASKLET() users had a "0" data argument, it has been removed here as well. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Kees Cook <keescook@chromium.org>
2020-07-27s390/ism: indicate correct error reason in ism_alloc_dmb()Karsten Graul1-1/+1
When the ism driver allocates a new dmb in ism_alloc_dmb() it must first check for and reserve a slot in the sba bitmap. When find_next_zero_bit() finds no free slot then the return code is -ENOMEM. This code conflicts with the error when the alloc() fails later in the code. As a result of that the caller can not differentiate between out-of-memory conditions and sba-bitmap-full conditions. Fix that by using the return code -ENOSPC when the sba slot reservation failed. Reviewed-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20s390/qdio: remove internal polling in non-thinint pathJulian Wiedmann2-27/+2
For non-thinint devices in LPAR, qdio polls an idle Input Queue for a little while to catch more work. But platform support for thinints has been around practically _forever_ by now, so this micro-optimization is seeing 0 actual use. Remove it to reduce the overall complexity of the hot path. In the meantime we also grew support for driver-level polling (eg. NAPI in qeth), so it's quite questionable how useful this would actually be on current kernels. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-07-20s390/qdio: allow to scan all 128 Input SBALsJulian Wiedmann1-5/+1
The comment is inaccurate, qdio_inbound_q_moved() and/or its callers no longer get confused by a count of 128 completed SBALs. Scanning all 128 SBALs at once can improve IRQ reduction (as we now place the ACK at the right spot), and reduce the amount of processing needed to handle all completed SBALs. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-07-20s390/qdio: fix statistics for 128 SBALsJulian Wiedmann3-14/+3
Old code would only scan up to 127 SBALs at once. So the last statistics bucket was set aside to count "discovered 127 SBALs with new work" events. But nowadays we allow to scan all 128 SBALs for Output Queues, and a subsequent patch will introduce the same for Input Queues. So fix up the accounting to use the last bucket only when all 128 SBALs have been discovered with new work. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-07-15s390/dasd: Use struct_size() helperGustavo A. R. Silva1-5/+3
Make use of the struct_size() helper instead of an open-coded version in order to avoid any potential type mistakes. Also, remove unnecessary variable _datasize_. This code was detected with the help of Coccinelle and, audited and fixed manually. Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-15s390/dasd: fix inability to use DASD with DIAG driverStefan Haberland1-8/+17
During initialization of the DASD DIAG driver a request is issued that has a bio structure that resides on the stack. With virtually mapped kernel stacks this bio address might be in virtual storage which is unsuitable for usage with the diag250 call. In this case the device can not be set online using the DIAG discipline and fails with -EOPNOTSUP. In the system journal the following error message is presented: dasd: X.X.XXXX Setting the DASD online with discipline DIAG failed with rc=-95 Fix by allocating the bio structure instead of having it on the stack. Fixes: ce3dc447493f ("s390: add support for virtually mapped kernel stacks") Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com> Cc: stable@vger.kernel.org #4.20 Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-14s390/qeth: constify the MPC initialization dataJulian Wiedmann3-18/+17
We're not modifying these data blobs, so mark them as constant. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-14s390/qeth: unify RX-mode hashtablesJulian Wiedmann4-14/+12
To keep track of the addresses programmed from an RX modeset, we have two separate hashtables (L2: mac_htable, L3: ip_mc_htable). These are never used at the same time, so unify them into a single rx_mode_addrs hashtable. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-14s390/qeth: cleanup OAT codeJulian Wiedmann1-28/+12
While initially just trying to fix up the indentation, condense a few lines and get rid of a goto label. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-14s390/qeth: clean up a magic number in the OAT callbackJulian Wiedmann1-4/+2
Use the correct struct member instead of hardcoding its offset. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-14s390/qeth: use u64_to_user_ptr() in the OAT codeJulian Wiedmann1-4/+2
Use the correct helper for casting to a user pointer. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-14s390/qeth: clean up error handling for isolation mode cmdsJulian Wiedmann3-70/+40
As the cmd IO path has learned to propagate errnos back to its callers, let them deal with errors instead of trying to restore their previous configuration from within the IO error path. Also translate the HW error to a meaningful errno, instead of returning -EIO for all cases (and don't map this to -EOPNOTSUPP later on...). While at it, add a READ_ONCE() / WRITE_ONCE() pair to ensure that the data path always sees a valid isolation mode during reconfiguration. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-14s390/qeth: don't clear the configured isolation modeJulian Wiedmann1-11/+11
When qeth_set_access_ctrl_online() is called during the device's initialization and discovers that isolation mode isn't supported, don't clear the user's currently configured mode. They intentionally choose to operate the device in this specific mode, and degrading the isolation is not an option. Only adjust the configuration when called via sysfs (ie. fallback = 1), and here follow the common pattern and restore it from prev_isolation. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-14s390/qeth: only init the isolation mode when necessaryJulian Wiedmann1-5/+6
A newly initialized device defaults to ISOLATION_MODE_NONE, don't bother with programming this a second time. Then remove the OSD/OSX check, it's already done in the sysfs path whenever the user actually changes the configuration. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-14s390/qeth: fine-tune errno when cmds are cancelledJulian Wiedmann1-1/+1
If we cancel all pending cmds (eg. when tearing down the device), don't blame it on an IO error. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-14s390/qeth: reject unsupported link type earlierJulian Wiedmann2-17/+27
Rather than delaying the decision until netdev setup, immediately reject a device when we discover that it has an unsupported link type (ie. Token Ring). Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-10s390/ap: rework crypto config info and default domain codeHarald Freudenberger1-148/+153
Rework of the QCI crypto info and how it is used. This is only a internal rework but does not affect the way how the ap bus acts with ap card and queue devices and domain handling. Tested on z15, z14, z12 (QCI support) and z196 (no QCI support). Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-07-08Merge tag 'v5.8-rc4' into for-5.9/driversJens Axboe2-8/+16
Merge in 5.8-rc4 for-5.9/block to setup for-5.9/drivers, to provide a clean base and making the life for the NVMe changes easier. Signed-off-by: Jens Axboe <axboe@kernel.dk> * tag 'v5.8-rc4': (732 commits) Linux 5.8-rc4 x86/ldt: use "pr_info_once()" instead of open-coding it badly MIPS: Do not use smp_processor_id() in preemptible code MIPS: Add missing EHB in mtc0 -> mfc0 sequence for DSPen .gitignore: Do not track `defconfig` from `make savedefconfig` io_uring: fix regression with always ignoring signals in io_cqring_wait() x86/ldt: Disable 16-bit segments on Xen PV x86/entry/32: Fix #MC and #DB wiring on x86_32 x86/entry/xen: Route #DB correctly on Xen PV x86/entry, selftests: Further improve user entry sanity checks x86/entry/compat: Clear RAX high bits on Xen PV SYSENTER i2c: mlxcpld: check correct size of maximum RECV_LEN packet i2c: add Kconfig help text for slave mode i2c: slave-eeprom: update documentation i2c: eg20t: Load module automatically if ID matches i2c: designware: platdrv: Set class based on DMI i2c: algo-pca: Add 0x78 as SCL stuck low status for PCA9665 mm/page_alloc: fix documentation error vmalloc: fix the owner argument for the new __vmalloc_node_range callers mm/cma.c: use exact_nid true to fix possible per-numa cma leak ...
2020-07-08scsi: zfcp: Avoid benign overflow of the Request Queue's free-levelJulian Wiedmann1-1/+4
zfcp_qdio_send() and zfcp_qdio_int_req() run concurrently, adding and completing SBALs on the Request Queue. There's a theoretical race where zfcp_qdio_int_req() completes a number of SBALs & increments the queue's free-level _before_ zfcp_qdio_send() was able to decrement it. This can cause ->req_q_free to momentarily hold a value larger than QDIO_MAX_BUFFERS_PER_Q. Luckily zfcp_qdio_send() is always called under ->req_q_lock, and all readers of the free-level also take this lock. So we can trust that zfcp_qdio_send() will clean up such a temporary overflow before anyone can actually observe it. But it's still confusing and annoying to worry about. So adjust the code to avoid this race. Link: https://lore.kernel.org/r/7f61f59a1f8db270312e64644f9173b8f1ac895f.1593780621.git.bblock@linux.ibm.com Reviewed-by: Steffen Maier <maier@linux.ibm.com> Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-08scsi: zfcp: Replace open-coded list moveJulian Wiedmann1-4/+3
Instead of manually moving each element of the unit and port lists into our temporary on-stack lists, splice them over in one go. Link: https://lore.kernel.org/r/cacb179f49ece50fd4dce119c61252d632cdc1d4.1593780621.git.bblock@linux.ibm.com Reviewed-by: Steffen Maier <maier@linux.ibm.com> Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-08scsi: zfcp: Clean up zfcp_erp_action_ready()Julian Wiedmann1-1/+1
We already maintain a pointer to act->adapter. Use it consistently to avoid any confusion about whose ->erp_ready_head and ->erp_ready_wq we are accessing. Link: https://lore.kernel.org/r/d1bb04322f240dee32f4c4a551bc93bc736f4b01.1593780621.git.bblock@linux.ibm.com Reviewed-by: Steffen Maier <maier@linux.ibm.com> Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-08scsi: zfcp: Fix an outdated comment for zfcp_qdio_send()Julian Wiedmann1-1/+1
zfcp no longer uses the qdio PCI flag, update the comment. Link: https://lore.kernel.org/r/6717c26fc986bff8776d110e27c199b523684c63.1593780621.git.bblock@linux.ibm.com Fixes: 21ddaa53f92d ("[SCSI] zfcp: Remove PCI flag") Reviewed-by: Steffen Maier <maier@linux.ibm.com> Reviewed-by: Fedor Loshakov <loshakov@linux.ibm.com> Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-08scsi: zfcp: Use prandom_u32_max() for backoffGeorge Spelvin1-1/+1
We don't need crypto-grade random numbers for randomized backoffs. Instead use prandom_u32_max(ep_ro) which generates a pseudo-random number uniformly distributed in the interval [0, ep_ro). Link: https://lore.kernel.org/r/8fc7c4c4069ff1783f4a9ccd84a923f581a09ec5.1593780621.git.bblock@linux.ibm.com Reviewed-by: Steffen Maier <maier@linux.ibm.com> Signed-off-by: George Spelvin <lkml@sdf.org> Signed-off-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-03vfio-ccw: Fix a build error due to missing include of linux/slab.hSean Christopherson1-0/+1
Include linux/slab.h to fix a build error due to kfree() being undefined. Fixes: 3f02cb2fd9d2 ("vfio-ccw: Wire up the CRW irq and CRW region") Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Message-Id: <20200703022628.6036-1-sean.j.christopherson@intel.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2020-07-03s390/zcrypt: provide cex4 cca sysfs attributes for cex3Harald Freudenberger2-8/+132
This patch introduces the sysfs attributes serialnr and mkvps for cex2c and cex3c cards. These sysfs attributes are available for cex4c and higher since commit 7c4e91c0959b ("s390/zcrypt: new sysfs attributes serialnr and mkvps")' and this patch now provides the same for the older cex2 and cex3 cards. Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2020-07-03s390/ap: rename and clarify ap state machine related stuffHarald Freudenberger3-138/+138
There is a state machine held for each ap queue device. The states and functions related to this where somethimes noted with _sm_ somethimes without. This patch clarifies and renames all the ap queue state machine related functions, enums and defines to have a _sm_ in the name. There is no functional change coming with this patch - it's only beautifying code. Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2020-07-03s390/zcrypt: split ioctl function into smaller code unitsHarald Freudenberger1-72/+92
The zcrpyt_unlocked_ioctl() function has become large. So split away into new static functions the 4 ioctl ICARSAMODEXPO, ICARSACRT, ZSECSENDCPRB and ZSENDEP11CPRB. This makes the code more readable and is a preparation step for further improvements needed on these ioctls. Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2020-07-03s390/zcrypt: code beautification and struct field renamesHarald Freudenberger9-149/+147
Some beautifications related to the internal only used struct ap_message and related code. Instead of one int carrying only the special flag now a u32 flags field is used. At struct CPRBX the pointers to additional data are now marked with __user. This caused some changes needed on code, where these structs are also used within the zcrypt misc functions. The ica_rsa_* structs now use the generic types __u8, __u32, ... instead of char, unsigned int. zcrypt_msg6 and zcrypt_msg50 use min_t() instead of min(). Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2020-07-03s390/zcrypt: fix smatch warningsHarald Freudenberger2-8/+8
Fix these smatch warnings: zcrypt_api.c:986 _zcrypt_send_ep11_cprb() error: uninitialized symbol 'pref_weight'. zcrypt_api.c:1008 _zcrypt_send_ep11_cprb() error: uninitialized symbol 'weight'. zcrypt_api.c:676 zcrypt_rsa_modexpo() error: uninitialized symbol 'pref_weight'. zcrypt_api.c:694 zcrypt_rsa_modexpo() error: uninitialized symbol 'weight'. zcrypt_api.c:760 zcrypt_rsa_crt() error: uninitialized symbol 'pref_weight'. zcrypt_api.c:778 zcrypt_rsa_crt() error: uninitialized symbol 'weight'. zcrypt_api.c:824 _zcrypt_send_cprb() warn: always true condition '(tdom >= 0) => (0-u16max >= 0)' zcrypt_api.c:846 _zcrypt_send_cprb() error: uninitialized symbol 'pref_weight'. zcrypt_api.c:867 _zcrypt_send_cprb() error: uninitialized symbol 'weight'. zcrypt_api.c:1065 zcrypt_rng() error: uninitialized symbol 'pref_weight'. zcrypt_api.c:1079 zcrypt_rng() error: uninitialized symbol 'weight'. zcrypt_cex4.c:251 ep11_card_op_modes_show() warn: should '(1 << ep11_op_modes[i]->mode_bit)' be a 64 bit type? zcrypt_cex4.c:346 ep11_queue_op_modes_show() warn: should '(1 << ep11_op_modes[i]->mode_bit)' be a 64 bit type? Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2020-07-03s390/pkey: fix smatch warning inconsistent indentingHarald Freudenberger1-2/+2
Fix smatch warnings: pkey_api.c:1606 pkey_ccacipher_aes_attr_read() warn: inconsistent indenting Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2020-07-01s390/tty3270: remove function callback castsOscar Carter1-6/+6
In an effort to enable -Wcast-function-type in the top-level Makefile to support Control Flow Integrity builds, remove all the function callback casts. To do this modify the function prototypes accordingly. Signed-off-by: Oscar Carter <oscar.carter@gmx.com> Message-Id: <20200627125417.18887-1-oscar.carter@gmx.com> Reviewed-by: Kees Cook <keescook@chromium.org> [heiko.carstens@de.ibm.com: coding style changes] Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2020-07-01dcssblk: don't set bd_block_size in ->openChristoph Hellwig1-1/+0
bd_block_size contains a value that matches the logic block size when opening, so the statement is redundant. Even if it wasn't the dumb assignment would cause a a mismatch with bd_inode->i_blkbits. Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>

Privacy Policy