path: root/net
AgeCommit message (Collapse)AuthorFilesLines
2019-01-06jump_label: move 'asm goto' support test to KconfigMasahiro Yamada2-6/+6
Currently, CONFIG_JUMP_LABEL just means "I _want_ to use jump label". The jump label is controlled by HAVE_JUMP_LABEL, which is defined like this: #if defined(CC_HAVE_ASM_GOTO) && defined(CONFIG_JUMP_LABEL) # define HAVE_JUMP_LABEL #endif We can improve this by testing 'asm goto' support in Kconfig, then make JUMP_LABEL depend on CC_HAS_ASM_GOTO. Ugly #ifdef HAVE_JUMP_LABEL will go away, and CONFIG_JUMP_LABEL will match to the real kernel capability. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
2019-01-05Merge tag 'ceph-for-4.21-rc1' of git://github.com/ceph/ceph-clientLinus Torvalds1-34/+21
Pull ceph updates from Ilya Dryomov: "A fairly quiet round: a couple of messenger performance improvements from myself and a few cap handling fixes from Zheng" * tag 'ceph-for-4.21-rc1' of git://github.com/ceph/ceph-client: ceph: don't encode inode pathes into reconnect message ceph: update wanted caps after resuming stale session ceph: skip updating 'wanted' caps if caps are already issued ceph: don't request excl caps when mount is readonly ceph: don't update importing cap's mseq when handing cap export libceph: switch more to bool in ceph_tcp_sendmsg() libceph: use MSG_SENDPAGE_NOTLAST with ceph_tcp_sendpage() libceph: use sock_no_sendpage() as a fallback in ceph_tcp_sendpage() libceph: drop last_piece logic from write_partial_message_data() ceph: remove redundant assignment ceph: cleanup splice_dentry()
2019-01-03Remove 'type' argument from access_ok() functionLinus Torvalds4-18/+18
Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument of the user address range verification function since we got rid of the old racy i386-only code to walk page tables by hand. It existed because the original 80386 would not honor the write protect bit when in kernel mode, so you had to do COW by hand before doing any user access. But we haven't supported that in a long time, and these days the 'type' argument is a purely historical artifact. A discussion about extending 'user_access_begin()' to do the range checking resulted this patch, because there is no way we're going to move the old VERIFY_xyz interface to that model. And it's best done at the end of the merge window when I've done most of my merges, so let's just get this done once and for all. This patch was mostly done with a sed-script, with manual fix-ups for the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form. There were a couple of notable cases: - csky still had the old "verify_area()" name as an alias. - the iter_iov code had magical hardcoded knowledge of the actual values of VERIFY_{READ,WRITE} (not that they mattered, since nothing really used it) - microblaze used the type argument for a debug printout but other than those oddities this should be a total no-op patch. I tried to fix up all architectures, did fairly extensive grepping for access_ok() uses, and the changes are trivial, but I may have missed something. Any missed conversion should be trivially fixable, though. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds28-236/+263
Pull networking fixes from David Miller: "Several fixes here. Basically split down the line between newly introduced regressions and long existing problems: 1) Double free in tipc_enable_bearer(), from Cong Wang. 2) Many fixes to nf_conncount, from Florian Westphal. 3) op->get_regs_len() can throw an error, check it, from Yunsheng Lin. 4) Need to use GFP_ATOMIC in *_add_hash_mac_address() of fsl/fman driver, from Scott Wood. 5) Inifnite loop in fib_empty_table(), from Yue Haibing. 6) Use after free in ax25_fillin_cb(), from Cong Wang. 7) Fix socket locking in nr_find_socket(), also from Cong Wang. 8) Fix WoL wakeup enable in r8169, from Heiner Kallweit. 9) On 32-bit sock->sk_stamp is not thread-safe, from Deepa Dinamani. 10) Fix ptr_ring wrap during queue swap, from Cong Wang. 11) Missing shutdown callback in hinic driver, from Xue Chaojing. 12) Need to return NULL on error from ip6_neigh_lookup(), from Stefano Brivio. 13) BPF out of bounds speculation fixes from Daniel Borkmann" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (57 commits) ipv6: Consider sk_bound_dev_if when binding a socket to an address ipv6: Fix dump of specific table with strict checking bpf: add various test cases to selftests bpf: prevent out of bounds speculation on pointer arithmetic bpf: fix check_map_access smin_value test when pointer contains offset bpf: restrict unknown scalars of mixed signed bounds for unprivileged bpf: restrict stack pointer arithmetic for unprivileged bpf: restrict map value pointer arithmetic for unprivileged bpf: enable access to ax register also from verifier rewrite bpf: move tmp variable into ax register in interpreter bpf: move {prev_,}insn_idx into verifier env isdn: fix kernel-infoleak in capi_unlocked_ioctl ipv6: route: Fix return value of ip6_neigh_lookup() on neigh_create() error net/hamradio/6pack: use mod_timer() to rearm timers net-next/hinic:add shutdown callback net: hns3: call hns3_nic_net_open() while doing HNAE3_UP_CLIENT ip: validate header length on virtual device xmit tap: call skb_probe_transport_header after setting skb->dev ptr_ring: wrap back ->producer in __ptr_ring_swap_queue() net: rds: remove unnecessary NULL check ...
2019-01-02ipv6: Consider sk_bound_dev_if when binding a socket to an addressDavid Ahern1-0/+3
IPv6 does not consider if the socket is bound to a device when binding to an address. The result is that a socket can be bound to eth0 and then bound to the address of eth1. If the device is a VRF, the result is that a socket can only be bound to an address in the default VRF. Resolve by considering the device if sk_bound_dev_if is set. This problem exists from the beginning of git history. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-02ipv6: Fix dump of specific table with strict checkingDavid Ahern1-1/+5
Dump of a specific table with strict checking enabled is looping. The problem is that the end of the table dump is not marked in the cb. When dumping a specific table, cb args 0 and 1 are not used (they are the hash index and entry with an hash table index when dumping all tables). Re-use args[0] to hold a 'done' flag for the specific table dump. Fixes: 13e38901d46ca ("net/ipv6: Plumb support for filtering route dumps") Reported-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-02Merge tag 'nfs-for-4.21-1' of git://git.linux-nfs.org/projects/anna/linux-nfsLinus Torvalds23-1268/+487
Pull NFS client updates from Anna Schumaker: "Stable bugfixes: - xprtrdma: Yet another double DMA-unmap # v4.20 Features: - Allow some /proc/sys/sunrpc entries without CONFIG_SUNRPC_DEBUG - Per-xprt rdma receive workqueues - Drop support for FMR memory registration - Make port= mount option optional for RDMA mounts Other bugfixes and cleanups: - Remove unused nfs4_xdev_fs_type declaration - Fix comments for behavior that has changed - Remove generic RPC credentials by switching to 'struct cred' - Fix crossing mountpoints with different auth flavors - Various xprtrdma fixes from testing and auditing the close code - Fixes for disconnect issues when using xprtrdma with krb5 - Clean up and improve xprtrdma trace points - Fix NFS v4.2 async copy reboot recovery" * tag 'nfs-for-4.21-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (63 commits) sunrpc: convert to DEFINE_SHOW_ATTRIBUTE sunrpc: Add xprt after nfs4_test_session_trunk() sunrpc: convert unnecessary GFP_ATOMIC to GFP_NOFS sunrpc: handle ENOMEM in rpcb_getport_async NFS: remove unnecessary test for IS_ERR(cred) xprtrdma: Prevent leak of rpcrdma_rep objects NFSv4.2 fix async copy reboot recovery xprtrdma: Don't leak freed MRs xprtrdma: Add documenting comment for rpcrdma_buffer_destroy xprtrdma: Replace outdated comment for rpcrdma_ep_post xprtrdma: Update comments in frwr_op_send SUNRPC: Fix some kernel doc complaints SUNRPC: Simplify defining common RPC trace events NFS: Fix NFSv4 symbolic trace point output xprtrdma: Trace mapping, alloc, and dereg failures xprtrdma: Add trace points for calls to transport switch methods xprtrdma: Relocate the xprtrdma_mr_map trace points xprtrdma: Clean up of xprtrdma chunk trace points xprtrdma: Remove unused fields from rpcrdma_ia xprtrdma: Cull dprintk() call sites ...
2019-01-02Merge tag 'nfsd-4.21' of git://linux-nfs.org/~bfields/linuxLinus Torvalds13-278/+112
Pull nfsd updates from Bruce Fields: "Thanks to Vasily Averin for fixing a use-after-free in the containerized NFSv4.2 client, and cleaning up some convoluted backchannel server code in the process. Otherwise, miscellaneous smaller bugfixes and cleanup" * tag 'nfsd-4.21' of git://linux-nfs.org/~bfields/linux: (25 commits) nfs: fixed broken compilation in nfs_callback_up_net() nfs: minor typo in nfs4_callback_up_net() sunrpc: fix debug message in svc_create_xprt() sunrpc: make visible processing error in bc_svc_process() sunrpc: remove unused xpo_prep_reply_hdr callback sunrpc: remove svc_rdma_bc_class sunrpc: remove svc_tcp_bc_class sunrpc: remove unused bc_up operation from rpc_xprt_ops sunrpc: replace svc_serv->sv_bc_xprt by boolean flag sunrpc: use-after-free in svc_process_common() sunrpc: use SVC_NET() in svcauth_gss_* functions nfsd: drop useless LIST_HEAD lockd: Show pid of lockd for remote locks NFSD remove OP_CACHEME from 4.2 op_flags nfsd: Return EPERM, not EACCES, in some SETATTR cases sunrpc: fix cache_head leak due to queued request nfsd: clean up indentation, increase indentation in switch statement svcrdma: Optimize the logic that selects the R_key to invalidate nfsd: fix a warning in __cld_pipe_upcall() nfsd4: fix crash on writing v4_end_grace before nfsd startup ...
2019-01-02Merge tag '9p-for-4.21' of git://github.com/martinetd/linuxLinus Torvalds2-0/+22
Pull 9p updates from Dominique Martinet: "Missing prototype warning fix and a syzkaller fix when a 9p server advertises a too small msize" * tag '9p-for-4.21' of git://github.com/martinetd/linux: 9p/net: put a lower bound on msize net/9p: include trans_common.h to fix missing prototype warning.
2019-01-02ipv6: route: Fix return value of ip6_neigh_lookup() on neigh_create() errorStefano Brivio1-1/+3
In ip6_neigh_lookup(), we must not return errors coming from neigh_create(): if creation of a neighbour entry fails, the lookup should return NULL, in the same way as it's done in __neigh_lookup(). Otherwise, callers legitimately checking for a non-NULL return value of the lookup function might dereference an invalid pointer. For instance, on neighbour table overflow, ndisc_router_discovery() crashes ndisc_update() by passing ERR_PTR(-ENOBUFS) as 'neigh' argument. Reported-by: Jianlin Shi <jishi@redhat.com> Fixes: f8a1b43b709d ("net/ipv6: Create a neigh_lookup for FIB entries") Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-02sunrpc: convert to DEFINE_SHOW_ATTRIBUTEYangtao Li1-16/+3
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-01-02sunrpc: Add xprt after nfs4_test_session_trunk()Santosh kumar pradhan1-0/+3
Multipathing: In case of NFSv3, rpc_clnt_test_and_add_xprt() adds the xprt to xprt switch (i.e. xps) if rpc_call_null_helper() returns success. But in case of NFSv4.1, it needs to do EXCHANGEID to verify the path along with check for session trunking. Add the xprt in nfs4_test_session_trunk() only when nfs4_detect_session_trunking() returns success. Also release refcount hold by rpc_clnt_setup_test_and_add_xprt(). Signed-off-by: Santosh kumar pradhan <santoshkumar.pradhan@wdc.com> Tested-by: Suresh Jayaraman <suresh.jayaraman@wdc.com> Reported-by: Aditya Agnihotri <aditya.agnihotri@wdc.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-01-02sunrpc: convert unnecessary GFP_ATOMIC to GFP_NOFSJ. Bruce Fields1-2/+2
It's OK to sleep here, we just don't want to recurse into the filesystem as a writeout could be waiting on this. Future work: the documentation for GFP_NOFS says "Please try to avoid using this flag directly and instead use memalloc_nofs_{save,restore} to mark the whole scope which cannot/shouldn't recurse into the FS layer with a short explanation why. All allocation requests will inherit GFP_NOFS implicitly." But I'm not sure where to do this. Should the workqueue be arranging that for us in the case of workqueues created with WQ_MEM_RECLAIM? Reported-by: Trond Myklebust <trondmy@hammer.space> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-01-02sunrpc: handle ENOMEM in rpcb_getport_asyncJ. Bruce Fields1-0/+8
If we ignore the error we'll hit a null dereference a little later. Reported-by: syzbot+4b98281f2401ab849f4b@syzkaller.appspotmail.com Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-01-02xprtrdma: Prevent leak of rpcrdma_rep objectsChuck Lever1-0/+4
If a reply has been processed but the RPC is later retransmitted anyway, the req->rl_reply field still contains the only pointer to the old rpcrdma rep. When the next reply comes in, the reply handler will stomp on the rl_reply field, leaking the old rep. A trace event is added to capture such leaks. This problem seems to be worsened by the restructuring of the RPC Call path in v4.20. Fully addressing this issue will require at least a re-architecture of the disconnect logic, which is not appropriate during -rc. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-01-02xprtrdma: Don't leak freed MRsChuck Lever1-12/+15
Defensive clean up. Don't set frwr->fr_mr until we know that the scatterlist allocation has succeeded. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-01-02xprtrdma: Add documenting comment for rpcrdma_buffer_destroyChuck Lever1-0/+8
Make a note of the function's dependency on an earlier ib_drain_qp. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-01-02xprtrdma: Replace outdated comment for rpcrdma_ep_postChuck Lever1-3/+7
Since commit 7c8d9e7c8863 ("xprtrdma: Move Receive posting to Receive handler"), rpcrdma_ep_post is no longer responsible for posting Receive buffers. Update the documenting comment to reflect this change. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-01-02xprtrdma: Update comments in frwr_op_sendChuck Lever1-2/+2
Commit f2877623082b ("xprtrdma: Chain Send to FastReg WRs") was written before commit ce5b37178283 ("xprtrdma: Replace all usage of "frmr" with "frwr""), but was merged afterwards. Thus it still refers to FRMR and MWs. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-01-02SUNRPC: Fix some kernel doc complaintsChuck Lever4-4/+6
Clean up some warnings observed when building with "make W=1". Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-01-02xprtrdma: Trace mapping, alloc, and dereg failuresChuck Lever3-10/+8
These are rare, but can be helpful at tracking down DMAR and other problems. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-01-02xprtrdma: Add trace points for calls to transport switch methodsChuck Lever1-7/+11
Name them "trace_xprtrdma_op_*" so they can be easily enabled as a group. No trace point is added where the generic layer already has observability. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-01-02xprtrdma: Relocate the xprtrdma_mr_map trace pointsChuck Lever1-1/+1
The mr_map trace points were capturing information about the previous use of the MR rather than about the segment that was just mapped. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-01-02xprtrdma: Clean up of xprtrdma chunk trace pointsChuck Lever1-3/+3
The chunk-related trace points capture nearly the same information as the MR-related trace points. Also, rename them so globbing can be used to enable or disable these trace points more easily. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-01-02xprtrdma: Remove unused fields from rpcrdma_iaChuck Lever1-2/+0
Clean up. The last use of these fields was in commit 173b8f49b3af ("xprtrdma: Demote "connect" log messages") . Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-01-02xprtrdma: Cull dprintk() call sitesChuck Lever4-68/+19
Clean up: Remove dprintk() call sites that report rare or impossible errors. Leave a few that display high-value low noise status information. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-01-02xprtrdma: Simplify locking that protects the rl_allreqs listChuck Lever3-35/+23
Clean up: There's little chance of contention between the use of rb_lock and rb_reqslock, so merge the two. This avoids having to take both in some (possibly future) cases. Transport tear-down is already serialized, thus there is no need for locking at all when destroying rpcrdma_reqs. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-01-02xprtrdma: Expose transport header errorsChuck Lever1-1/+0
For better observability of parsing errors, return the error code generated in the decoders to the upper layer consumer. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-01-02xprtrdma: Remove request_module from backchannelChuck Lever1-2/+0
Since commit ffe1f0df5862 ("rpcrdma: Merge svcrdma and xprtrdma modules into one"), the forward and backchannel components are part of the same kernel module. A separate request_module() call in the backchannel code is no longer necessary. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-01-02xprtrdma: Recognize XDRBUF_SPARSE_PAGESChuck Lever1-5/+6
Commit 431f6eb3570f ("SUNRPC: Add a label for RPC calls that require allocation on receive") didn't update similar logic in rpc_rdma.c. I don't think this is a bug, per-se; the commit just adds more careful checking for broken upper layer behavior. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-01-02xprtrdma: Plant XID in on-the-wire RDMA offset (FRWR)Chuck Lever3-5/+8
Place the associated RPC transaction's XID in the upper 32 bits of each RDMA segment's rdma_offset field. There are two reasons to do this: - The R_key only has 8 bits that are different from registration to registration. The XID adds more uniqueness to each RDMA segment to reduce the likelihood of a software bug on the server reading from or writing into memory it's not supposed to. - On-the-wire RDMA Read and Write requests do not otherwise carry any identifier that matches them up to an RPC. The XID in the upper 32 bits will act as an eye-catcher in network captures. Suggested-by: Tom Talpey <ttalpey@microsoft.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-01-02xprtrdma: Remove rpcrdma_memreg_opsChuck Lever5-101/+116
Clean up: Now that there is only FRWR, there is no need for a memory registration switch. The indirect calls to the memreg operations can be replaced with faster direct calls. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-01-02xprtrdma: Remove support for FMR memory registrationChuck Lever4-359/+2
FMR is not supported on most recent RDMA devices. It is also less secure than FRWR because an FMR memory registration can expose adjacent bytes to remote reading or writing. As discussed during the RDMA BoF at LPC 2018, it is time to remove support for FMR in the NFS/RDMA client stack. Note that NFS/RDMA server-side uses either local memory registration or FRWR. FMR is not used. There are a few Infiniband/RoCE devices in the kernel tree that do not appear to support MEM_MGT_EXTENSIONS (FRWR), and therefore will not support client-side NFS/RDMA after this patch. These are: - mthca - qib - hns (RoCE) Users of these devices can use NFS/TCP on IPoIB instead. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-01-02xprtrdma: Reduce max_frwr_depthChuck Lever1-4/+11
Some devices advertise a large max_fast_reg_page_list_len capability, but perform optimally when MRs are significantly smaller than that depth -- probably when the MR itself is no larger than a page. By default, the RDMA R/W core API uses max_sge_rd as the maximum page depth for MRs. For some devices, the value of max_sge_rd is 1, which is also not optimal. Thus, when max_sge_rd is larger than 1, use that value. Otherwise use the value of the max_fast_reg_page_list_len attribute. I've tested this with CX-3 Pro, FastLinq, and CX-5 devices. It reproducibly improves the throughput of large I/Os by several percent. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-01-02xprtrdma: Fix ri_max_segs and the result of ro_maxpagesChuck Lever3-6/+14
With certain combinations of krb5i/p, MR size, and r/wsize, I/O can fail with EMSGSIZE. This is because the calculated value of ri_max_segs (the max number of MRs per RPC) exceeded RPCRDMA_MAX_HDR_SEGS, which caused Read or Write list encoding to walk off the end of the transport header. Once that was addressed, the ro_maxpages result has to be corrected to account for the number of MRs needed for Reply chunks, which is 2 MRs smaller than a normal Read or Write chunk. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-01-02xprtrdma: Don't wake pending tasks until disconnect is doneChuck Lever5-17/+23
Transport disconnect processing does a "wake pending tasks" at various points. Suppose an RPC Reply is being processed. The RPC task that Reply goes with is waiting on the pending queue. If a disconnect wake-up happens before reply processing is done, that reply, even if it is good, is thrown away, and the RPC has to be sent again. This window apparently does not exist for socket transports because there is a lock held while a reply is being received which prevents the wake-up call until after reply processing is done. To resolve this, all RPC replies being processed on an RPC-over-RDMA transport have to complete before pending tasks are awoken due to a transport disconnect. Callers that already hold the transport write lock may invoke ->ops->close directly. Others use a generic helper that schedules a close when the write lock can be taken safely. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-01-02xprtrdma: No qp_event disconnectChuck Lever2-33/+0
After thinking about this more, and auditing other kernel ULP imple- mentations, I believe that a DISCONNECT cm_event will occur after a fatal QP event. If that's the case, there's no need for an explicit disconnect in the QP event handler. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-01-02xprtrdma: Replace rpcrdma_receive_wq with a per-xprt workqueueChuck Lever4-48/+44
To address a connection-close ordering problem, we need the ability to drain the RPC completions running on rpcrdma_receive_wq for just one transport. Give each transport its own RPC completion workqueue, and drain that workqueue when disconnecting the transport. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-01-02xprtrdma: Refactor Receive accountingChuck Lever4-38/+18
Clean up: Divide the work cleanly: - rpcrdma_wc_receive is responsible only for RDMA Receives - rpcrdma_reply_handler is responsible only for RPC Replies - the posted send and receive counts both belong in rpcrdma_ep Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-01-02xprtrdma: Ensure MRs are DMA-unmapped when posting LOCAL_INV failsChuck Lever1-2/+2
The recovery case in frwr_op_unmap_sync needs to DMA unmap each MR. frwr_release_mr does not DMA-unmap, but the recycle worker does. Fixes: 61da886bf74e ("xprtrdma: Explicitly resetting MRs is ... ") Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-01-02xprtrdma: Yet another double DMA-unmapChuck Lever2-5/+10
While chasing yet another set of DMAR fault reports, I noticed that the frwr recycler conflates whether or not an MR has been DMA unmapped with frwr->fr_state. Actually the two have only an indirect relationship. It's in fact impossible to guess reliably whether the MR has been DMA unmapped based on its fr_state field, especially as the surrounding code and its assumptions have changed over time. A better approach is to track the DMA mapping status explicitly so that the recycler is less brittle to unexpected situations, and attempts to DMA-unmap a second time are prevented. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Cc: stable@vger.kernel.org # v4.20 Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-01-01ip: validate header length on virtual device xmitWillem de Bruijn8-32/+46
KMSAN detected read beyond end of buffer in vti and sit devices when passing truncated packets with PF_PACKET. The issue affects additional ip tunnel devices. Extend commit 76c0ddd8c3a6 ("ip6_tunnel: be careful when accessing the inner header") and commit ccfec9e5cb2d ("ip_tunnel: be careful when accessing the inner header"). Move the check to a separate helper and call at the start of each ndo_start_xmit function in net/ipv4 and net/ipv6. Minor changes: - convert dev_kfree_skb to kfree_skb on error path, as dev_kfree_skb calls consume_skb which is not for error paths. - use pskb_network_may_pull even though that is pedantic here, as the same as pskb_may_pull for devices without llheaders. - do not cache ipv6 hdrs if used only once (unsafe across pskb_may_pull, was more relevant to earlier patch) Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-01net: rds: remove unnecessary NULL checkZhu Yanjun1-1/+1
In kfree, the NULL check is done. Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-01sock: Make sock->sk_stamp thread-safeDeepa Dinamani3-12/+20
Al Viro mentioned (Message-ID <20170626041334.GZ10672@ZenIV.linux.org.uk>) that there is probably a race condition lurking in accesses of sk_stamp on 32-bit machines. sock->sk_stamp is of type ktime_t which is always an s64. On a 32 bit architecture, we might run into situations of unsafe access as the access to the field becomes non atomic. Use seqlocks for synchronization. This allows us to avoid using spinlocks for readers as readers do not need mutual exclusion. Another approach to solve this is to require sk_lock for all modifications of the timestamps. The current approach allows for timestamps to have their own lock: sk_stamp_lock. This allows for the patch to not compete with already existing critical sections, and side effects are limited to the paths in the patch. The addition of the new field maintains the data locality optimizations from commit 9115e8cd2a0c ("net: reorganize struct sock for better data locality") Note that all the instances of the sk_stamp accesses are either through the ioctl or the syscall recvmsg. Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-30netrom: fix locking in nr_find_socket()Cong Wang1-5/+10
nr_find_socket(), nr_find_peer() and nr_find_listener() lock the sock after finding it in the global list. However, the call path requires BH disabled for the sock lock consistently. Actually the locking is unnecessary at this point, we can just hold the sock refcnt to make sure it is not gone after we unlock the global list, and lock it later only when needed. Reported-and-tested-by: syzbot+f621cda8b7e598908efa@syzkaller.appspotmail.com Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-30ax25: fix a use-after-free in ax25_fillin_cb()Cong Wang2-2/+11
There are multiple issues here: 1. After freeing dev->ax25_ptr, we need to set it to NULL otherwise we may use a dangling pointer. 2. There is a race between ax25_setsockopt() and device notifier as reported by syzbot. Close it by holding RTNL lock. 3. We need to test if dev->ax25_ptr is NULL before using it. Reported-and-tested-by: syzbot+ae6bb869cbed29b29040@syzkaller.appspotmail.com Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-30ipv6: fix typo in net/ipv6/reassembly.cSu Yanjun1-1/+1
Signed-off-by: Su Yanjun <suyj.fnst@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-30ipv4: fib_rules: Fix possible infinite loop in fib_empty_tableYueHaibing1-2/+6
gcc warn this: net/ipv4/fib_rules.c:203 fib_empty_table() warn: always true condition '(id <= 4294967295) => (0-u32max <= u32max)' 'id' is u32, which always not greater than RT_TABLE_MAX (0xFFFFFFFF), So add a check to break while wrap around. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-30net/ipv6: Fix a test against 'ipv6_find_idev()' return valueChristophe JAILLET1-2/+2
'ipv6_find_idev()' returns NULL on error, not an error pointer. Update the test accordingly and return -ENOBUFS, as already done in 'addrconf_add_dev()', if NULL is returned. Fixes: ("ipv6: allow userspace to add IFA_F_OPTIMISTIC addresses") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-30net: rtnetlink: address is mandatory for rtnl_fdb_getNikolay Aleksandrov1-0/+5
We must have an address to lookup otherwise we'll derefence a null pointer in the ndo_fdb_get callbacks. CC: Roopa Prabhu <roopa@cumulusnetworks.com> CC: David Ahern <dsa@cumulusnetworks.com> Reported-by: syzbot+017b1f61c82a1c3e7efd@syzkaller.appspotmail.com Fixes: 5b2f94b27622 ("net: rtnetlink: support for fdb get") Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>

Privacy Policy